Question about Televison & Video

1 Answer

My Magnavox TV #19PSC5 0121 won't show me the A/V signal from my DVD. I don't have the original remote and there is nothing on the front panel or on the Menu that will allow me to get to the ''Input'' so I can watch the singal through the RCA A/V jacks. Any ideas?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

1.Check the input setting of your TV.Try to find the input setting of your TV go to menu and select the selected input you are using, its either rca input 1,2,3 or vga input.Try to read the label of your input if its input 1,2 or 3 then select the setting in input set-up.
2.Configuring the appropriate setting and still the problem did not solve.Try to substitute your DVD with another functional DVD.But before also replace your RCA cord to take away the probability of defective cord.After replacing another DVD and the problem is solve, your DVD setting must be check if its in pal or NTSC setting.Try to press N/P button on your remote.
3.If the following procedure does not work.Your unit needs to be check by an expert.This could be a service mode repair or internal components repair.

Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't find my original Magnavox Model 20mf25iw remote. How can I change from DVD back to TV without it?


If you wish to select its input, you must have its original remote control. No universal remote control will go. Try get an original one. Contact the authorised service center for Magnavox.

Nov 04, 2013 | Magnavox New Original 27MS3404 Remote...

1 Answer

My RCA Truflat T.V won't turn on and the FPA lock is turned on, I have the original remote. what should i do?


TV won't turn on • Press the TV button. Make sure the TV is plugged in.• Check the wall receptacle (or extension cord) to make sure it is "live" by plugging in something else.• Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control solutions on page 26.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).Buttons don't work
• If you're using the remote control, press the TV button first to make sure the remote is in TV mode.• The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the Lock Fr. Panel in the PARENTAL CONTROL menu and press OK (box won't have check mark).• Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.TV turns off unexpectedly • Sleep timer might have been activated. Go to page 24 for instructions.• KidPass might have been activated. Go to page 21 for instructions.• Wake-Up timer turned on the TV and no remote or front panel buttons were pressed for two hours.• Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then
turn on again. If this happens frequently, the voltage in your house may be abnormally high or low.
• Unplug TV. Wait five minutes. Plug it in again.

Sep 16, 2011 | RCA 20F420T 20" TV

2 Answers

Remote doesn't work. have purchased after market units and they don't sync up either? What to do?


Return the tv universal remote where u bought it,get ur money back.If none of the tv univeral romote programming codes on the owner manual codes for ur tv make and model don't even work and don't have any responses for ur tv make and model functioning all.Try website like Remotes.com to buy the tv original remote or a very closed compatible clone one.

Sep 03, 2011 | Toshiba MW24FM1 24 in. TV/VCR/DVD Combo

1 Answer

I have a Magnavox 15MF605T 17 that when the power button is pushed it goes green for a couple of seconds then turns amber. No picture, sound, etc. I unplugged the TV for about 10 minutes and when I...


Try to turn it on with a remote if one is available. If you don't have the original remote you can look up the universal code for the cable or satellite remote. Also try to turn it on with the input source(vcr,video game, cable box,etc...) on first. I have the same TV and if it has no signal prior to manual power up it will go to standby mode.

Jul 08, 2011 | AOMNI Corporation Magnavox 15MF605T/17 15...

1 Answer

I'm trying to connect my Wii console to an old magnavox tv my aunt gave me. I don't know how to connect it because it doesn't have the tv/video button on it. I've tried reconnecting...


U have the tv original remote?Look for a button said Input,used that button push it to goes into video mode 1 or 2.Don't have the tv original reomote.Try website like Remotes.com to buy the tv original remote.

May 08, 2011 | Televison & Video

2 Answers

I have a Magnavox ZV427MG9 A VHS & DVD Recorder


U must make sure ur tv channels must work throught ur DVD and VCR unit.Then u can record it out the tv show programs.U must connect the tv air signal or cable to the DVD VCR unit in the antena port.Use another cable connect out on the DVD &VCR unit and in the tv signal input in ur tv antena input.Make sure u in the channel 3 or 4 switch desire back of the DVD&VCR of the back,and the tv correct to ur desire channel switch to 3 or 4 .U
can record tv shows now.

Aug 18, 2009 | Philips Magnavox DVD+R/+RW Recorder/VCR

1 Answer

Do i need a remote to operate tv


once you have front panel in the tv and this one shows power channel +- volumen +- menu then your tv has to work with those ones and the remote is a second option to do the same. With this i mean you tv has to respond and at least show menu when you push that button " if no signal (cable DVD VCR) plug in"
Then if the tv is dead you should try to repair or sent it to repair. and then get the remote control and it can be universal too.

May 01, 2009 | Protron PLTV3250 32 in. LCD Television

1 Answer

Lost remote


Buy an original remote or get a new DVD player. I would never suggest to my worst enemy the purchase of anything from Philips. The lack of support which you are experiencing is deliberate. Don't reward them with another sale.

Aug 25, 2007 | Philips Magnavox 27MS343S 27" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...