Question about Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag Neptune TL FAV6800AWW doesn't totally drain

My wash has stopped about 10-13 minutes left in the cycle. The clothes still look soapy and there is water in bottom of unit, so I wonder if it ever really drained. It starts to spin, stops, starts to sound like it is gonna drain, but then spins again for a few seconds, and repeats several times...time on panel doesn't count down...then finally after several "cycles" dC is on the panel. I took out all towels and left only light amount of clothins...but it does it again anyway, however this time the water was out..clothes were still very very wet and slightly soapy. This last time it did say uC...that is not in manual. We just had a baby this summer and need this to work..are we looking at a big problem? Can I do the repair myself? Help!!

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 335 Answers


Hello themcphesons,

I know you are in a time crunch. Take a look at this post and see if you know someone a relative or a friend that has some very basic mechanical skills and can do a clutch replacement. This is a very common failure item with the FAV6800AW/FAV9800AW. I have put together a step by step process to perform a clutch replacement process this repair will get your $1000 machine back in service with a $50 dollar clutch replacement. Worse case you can give the repair person some facts and maybe control cost and speed to repair. I believe you will find you will pay $350 - $400 to have it repaired.

If you pay more than $50 dollars for the clutch you are throwing money away. Clothes Washer Clutch - 25001169

If the repair person challenges this I can provide testimonials from this board and another well know DIY repair board. Google “Replacing the Clutch in a Maytag FAV9800 TL Washer” and look down a subject or two and you will find my process steps.

Most repair folks don’t want to get involved with this machine because of lack of knowledge on the machine. Just look through this FAV6800AW forum and you will find what I’m speaking of. You will find post where they shotgun in parts in desperation for a quick fix instead of good old fashion troubleshooting. Like replacing the Control Board oops that didn’t work, lets try the TDS, darn that didn’t work and so on and so on. Here is a link on this board where Sears replaced the whole outer tub assembly….. now that’s takes the cake in shotgunning in parts. This owner at least had a service contract. The outer tub bearings this owner speaks of is the Upper roller oneway clutch bearing as I show in this post. This could have been fixed with a $50 dollar clutch replacement and a repair person 0.5 hour of labor cost if you know what you are doing,.

If you can get someone to help you I will offer phone support for the process if needed with no cost and support until you are up and running. I'm an owner not a appliance repair tech, I just got involved with the machine because I did not want to junk it. This machine has failure issues (high clutch failure rate) just like other machine types but you can extend its service life with some knowledge and some effort.

Good luck Rich

Posted on Jul 19, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 714 Answers

Try RepairClinic.com

Posted on Jul 19, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wash cycle are running to long


FIXED Maytag Neptune, Timer Problem - ApplianceBlog

www.applianceblog.com/.../23387-Maytag-Neptune-Timer-Problem

Mar 4, 2011 - 8 posts - ‎3 authors
My countdown timer is stuck at the 33-minute level in the "wash cycle", and repeatedlyruns for a 30-40 seconds, then stops, then runs, then ... Maytag Neptune TL Washing Machine stops in spin cycle ...
10 posts
Jul 25, 2013
Maytag Neptune Washer Won't Spin/drain
7 posts
Jul 4, 2013
Neptune TL Washer FAV6800AWW - DC and UC ...
5 posts
Jul 3, 2007
MAYTAG NEPTUNE WASHER CONTROL PANEL ...
8 posts
Jun 29, 2005
More results from www.applianceblog.com

Troubleshooting a Too-Long Wash Cycle - whirlpool washingmachine ...

ask.metafilter.com/233920/Troubleshooting-a-TooLong-Wash-Cycle
Jan 25, 2013 - We have a Whirlpool Duet washing machine (about 2 years old). Thecycle is taking WAY too long to complete. The load that's running now ...

Maytag Neptune washer repair: motor/motor control circuit ...

? 12:10
https://www.youtube.com/watch?v=ITTbDh8CFEU
Dec 11, 2013 - Uploaded by daytonaturbofreak
Maytag Neptune washer motor/motor control circuit board ... my board just fried - is your washer still working? wondering how longthe conversion fix will last. ... Other times it will run a completecycle without any malfunctions.

Jan 11, 2016 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Have Neptune FAV6800AWW top load, washes when it gets to the rinse cycle it stops with water in. If we remove the clothes and wait a while we can get it to complete. The code we are getting is DR which...


Are you sure the error code is DR? Could it be DC an unbalance error code. Google ""16022808.pdf"" to find. Is the washer banging around in Spin Cycle? If so this is a Clutch Pulley issue.

Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.

DR is not a listed error code in the FAV6800A/FAV9800A Service Manual.

Aug 27, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Model fav6800aww drains during the wash and rinse cycle but does not drain during the spin cycle. it give an dc code during the spin cycle which i know that means unbalance but what does that have to do...


Clutch issue and possible time for a tub seal replacement

Google this for a post that covers the Clutch removal and inspection/repair;

""Neptune TL Washer FAV6800AWW"" you will find the Service Manual in post 5 of that sticky.

Google this for Outer Tub bearing rebuild;""
FAV6800A/FAV9800A Outer Tub bearing replacement""

Aug 20, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Yes I just want to know I it's worth fixing this prob. I have a maytag Neptune tl washer model fav6800aww it's starts fine but after 3 minutes it stops on wash cycle an after 5 minutes Lr shows on...


Lr error code is locked rotor. Could be a couple different issues.

Google this phrase and read thru the post ""[FIXED] Maytag Neptune Top Load FAV6800AWW -- tub/motor will not spin""

Post in that forum if you want to DIY I do not offer DIY help here any more.

Jul 12, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Fav6800aww machine wont stay balanced move the clothes around it starts back up for about one minute then stops code comes up dc thanks earl


Google this; Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum and you can get the Service Manual and repair support at that site..

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues that I have helped owners with. I'm an owner of a FAV6800AWW top load machine.

In that Sticky I discuss what is the cause of DC or UC unbalance errors and the fix.

Apr 14, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

I have a Maytag Neptune TL ( Model # FAV6800AWW) washing machine does spend but clothes still soak after it done. when you spend it by hand, it only spend in counterclockwise.


Any error codes. What happens if you start a Spin Only Cycle witht the same load? Does the times stay stuck at xx minutes in the LED display and the machine constantely starts and stops?

The more info on your problem the better.

Do you want to DIY the fix? Google this; Neptune TL Washer FAV6800AWW see the 5th post down here for general info and the Service Manual. If you want to try to DIY the repair I will help.

Apr 04, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

I have a Maytag Neptune TL, it won't unlock and still shows 22 minutes left to wash...I just would like to get in unlocked for now, and take my clothes out...Thanks you!


If the Lid Locks won't release you can release the Washer top from the base. You need a putty knife and press in to release the.

Un plug the washer from the 120VAC outlet.

Insert a plastic putty knife in line with the lid seam and

push in to release catches on the left and right side.
Yhe top cover is hinged at the rear.
See Pic fpr putty knife insertion point;

dh1200s_3.jpgdh1200s_4.jpg
Ypu can get the Service Manual for here Neptune TL Washer FAV6800AWW

5 post doen in the sticky.

Apr 03, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My MAytag will not spin the water outta my clothes on spin cycle


If you machine is a FAV6800A or FAV9800A don't worry about the last two letters of the model number.

Google this; Neptune TL Washer FAV6800AWW

This is a DIY Appliance repair forum and you can get the Service Manual and repair support at that site..

In the Sticky: Neptune TL Washer FAV6800AWW 5 post down you will find a link to the Service Manual. You absolutely need the Service Manual to DIY issues with the machine. It's not the best SM but will get you started. I also have repair post in that sticky to help with the most common issues that I have helped owners with. I'm an owner of a FAV6800AWW top load machine.

If you need help post in the Maytag/Magic Chef/Admiral/Jenn-Air forum with your issue and we will try to help.

Feb 28, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Continue to receive a "DC" code on the Maytap


I no longer post on this site no way to post a Sticky.

If you want to DIY the repair Google this phrase ""Sticky: Neptune TL Washer FAV6800AWW""" Read the post Part 1; DC or UC unbalance error codes in Spin Cycle what is causing this issue? Part 2 for the fix action.

Post your issue in the repair forum not in the Sticky. Please include your Model Number i.e. FAV6800A or FAV9800A and I will help you.

Jan 22, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Maytag toploader Neptune washer stops with 10 minutes left on quick wash and code "uc" on LED. There is a little water left in bottom of tub and cloths are soaked. It does fine until the spin...


It sounds like the Outer Bearings are going due to a leaky Tub Seal. Bothe can be repaired and have done on this site. This site has no way to reference past post to machine issues.

I have helped owners of theFAV6800A and FAV9800A machines here but I prefer a tru DIY site.

I no longer post on this site no way to post a Sticky for machine issues.

If you want to DIY the repair Google this phrase ""Sticky: Neptune TL Washer FAV6800AWW""" Read the post Part 1; DC or UC unbalance error codes in Spin Cycle what is causing this issue? Part 2 for the fix action.

Post your issue in the repair forum not in the Sticky. Please include your Model Number i.e. FAV6800A or FAV9800A and I will help you.

Jan 22, 2011 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

615 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...