My singer touch and sew 7466 is beeping and won't sew.

No idea what's causing this, although something here may help:

Why does the electronic beeper beep and the sewing machine won sew Sewing...

Singer 7462 Mechanical Sewing Machine beep lights flash Questions

Bobbin won wind beeps flashing lights

Singer 7462 bobbin problem

Amazon com Customer Questions Answers

you can remove the rocker switch this will allow you to move the case away which inturn will allow more access

Here's a manual for your machine:

http://homeappliance.manualsonline.com/manuals/mfg/singer/7466.html

Didn't find instructions re the light bulb but best guess is that the cover on the left side needs to be removed. Looks like there may be a screw that holds the cover in place.

...

It is listed on: http://ismacs.net/singer_sewing_machine_company/serial-numbers/singer-sewing-machine-serial-number-database.html

Made in Montreal in 1906!

Oil it; wherever metal rubs on metal. Take apart the machine; where there are small holes in metal pieces, oil it.

yes

Could be a bent needle, try a new one after you have cleaned out the bobbin area with a brush. Then totally rethread. You can call customer service at 1-800-4singer and they can advise you further. Hopefully, it is nothing serious. Good luck.

hello to fellow seamstress; from a repair tech.

here is a download for the users manual here.

have you re-installed the software for your unit? one of my machines is a Singer.

When was the last time you cleaned the unit? get out the vacuum w/the pointy nozzle. clean it frequently. esp the underside.


(If this has been helpful, please rate my help++++Thanks for using FIXEYA)

a. needle in backwards
or
b. needle threaded wrong

This machine should be able to sew 9 layers with no real problems but it may be necessary to use a bridge or hump jumper to go over the big hump. Set your stitch length to almost the maximum and sew slowly(one stitch at a time). If it buzzes just turn it off, shorten the stitch length and try again. The above applies if you are using regular thread. If you are using heavy thread, you will need to use a top stitching needle size 18.( It has a larger eye)and adjust your tension as high as it will go to remove the loops on the bottom.
sewman7