Question about Hitachi 61SWX10B 61" Rear Projection Television

1 Answer

The 3 color guns seem to be out of alignment and the magic focus button doesn't fix it. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 668 Answers

The Convergence Circuit has failed. Replacing the two Convergence IC's and possibly one or two low ohm value resisters should fix the problem. I do recommend a professional to do the job since there may be adjustments in the factory mode needed after the repair to align it properly.
I hope this helps,
Skyassoc

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The magic focus does'nt seem to reset the auto convergence on the tv. Do you have any sugestions


The Magic focus button,not in effective anymore.The tv is 100% have convergence problems,it dead.The tv colors lines R,G,B mis alignment,have colors shadows pictures or 3D pictures look alike.The tv convergence board have dead 2 STK convergence ICS and some or all of it resistors are dead too.These parts on the tv convergence board,must replaced these parts on the tv convergence board to solved the tv picture convergence problems.The shop,will cost u like $300-350 for parts and labors.

Nov 07, 2010 | Hitachi 46F500 46" Rear Projection...

1 Answer

Can't get full screen. tried all aspect selections. also color is off. can't get it to adjust. magic focus dosen't help. any suggestions?


Magic focus button don't work.Colors lines R,G,B mis alignment,have colors shadows picture or 3D pictures.The tv have a problems known as a convergence problems,it dead.The tv convergence board it dead,must require replacing 2 STK convergence ICS and some or all it resistors to solved the tv convergence picture problems.The shop,will cost u $300-350 for parts and labors.

Oct 07, 2010 | Hitachi 57F510 57" Rear Projection...

1 Answer

Magic focus will not realign color. Red lines will not line up


Red Gun is out of alignment, need a tech to align color guns>

Feb 02, 2010 | Hitachi 57F500 57" Rear Projection...

1 Answer

I purchased a tv repair kit and replaced the convergence ic chips to fix my convergence problem. put everything back together and now, no picture. I tried magic focus and it works great, the colors are...


As per statement, "the magic focus works great, the colors are bright and aligned" it means the tubes are working ..you need feed a signal to see the picture...the tv video goes muted without signal

Dec 29, 2009 | Hitachi 60SDX88B 60" Rear Projection...

1 Answer

Yellow and blue color ruins total picture on 50" tv,can't get rid


lupe0112,

I'm no expert, but I think that you have a problem with the convergence of the 3 color guns. I've been working on a similar problem. As a first step, have you tried "Magic Focus?" The Magic Focus button for the Hitachi 53UDX10B is at the left of the small front panel controls that also include your RCA composite and SVideo connectors. Let the set warm up for about 20 minutes (as recommended by the user guide), and then press the Magic Focus button. When you press the Magic focus button, the set will auto align the 3 color guns. If this doesn't fix your problem, unplug the TV for at least 4 hours and try again.

Jan 08, 2009 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Colors are separated on the top from the left to right


Probably the color convergence is off. I had a similar problem. Have you tried the magic focus button yet? That is located at left in the small front control panel. Power on TV, wait 20 min (according to user guide), then press the magic focus. If that doesn't fix the problem, you could try the service mode alignment procedure. But that's a little trickier. I don't have a link handy for that procedure right now, but will look for it if magic focus doesn't re-align your color convergence.

Jan 02, 2009 | Hitachi 53UDX10B 53" Rear Projection...

2 Answers

1993 Hitachi Projection Screen TV


Hi Dennis!

Your HItachi has an automatic color convergence (color beam alignment) feature called "Magic Focus" which can be accessed from the set-up menu. When selected, you will be prompted to push the front panel "Magic Focus" button... do so only one time and do not hold the button in more than three seconds to enter this mode. The process takes about 90 seconds to complete, but a second push of the button will stop the process with no change.

If the convergence is still bad after the auto-correction process, then the guns are misaligned beyond its corrective capabilities, and would require manual convergence.

A service manual detailing how to do this is available for a nominal charge at http://www.how2files.com/bykey.php/hitachi.

If you don't have one, a free download of the user's manual is available at https://merchant.satisfusion.com/sf/WarrantyCenter/registration/secure/Hitachi/Manuals/ModelNumberManualLinks.jsp?masterModelOID=SF-990486114-595&random=1213688278588.

Hope this is helpful, let us know if you have any other questions, and good luck!

Thanks!
-WildBill

Jun 17, 2008 | Hitachi 53SBX01B 53" Rear Projection...

1 Answer

Hitachi 51f500 magic focus


convergance amp ic bad

· http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
· http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Dec 12, 2007 | Hitachi 51F500 51" Rear Projection...

1 Answer

Color Alignment


get a shop manual,it tells how to do the whole convergence process and how to store it to the rom memory to save it.

Mar 15, 2007 | Hitachi 43FWX20B 43" Rear Projection...

Not finding what you are looking for?
Hitachi 61SWX10B 61" Rear Projection Television Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...