At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most audio inputs on the receiver require line level signals. Headphone jacks on laptops do not supply that signal level. You may have to direct the audio out on your laptop to supply a line level signal to the headphone jack if that is an option on the laptop.
48 5 Philips 49PFT4001 05 Specifications According to this specification sheet there IS an audio out jack. You may want to check your owners manual for its location.
I apologize, but I've never seen the word "auriculars" used by Panasonic and don't really know exactly what you need help with, but I'd like to try. The dictionary says that "auriculars" means "adjective 1. of or pertaining to the ear or to the sense of hearing; aural. 2. perceived by or addressed to the ear; made in private: an auricular confession." Based on that, I wonder if you're referring to connecting an auxiliary headset. If so, there's a standard 3.5mm jack headset on the lower left side of the phone with an embossed headset symbol that can be used. If you're asking about adjusting the handset or speakerphone volume up or down, that's done with the circular silver ring in the lower right front of the phone that has up and down pointing arrows raised on it. If you're asking about hearing aid compatibility, the handset has the required magnetic transfer coil built in so as to allow a hearing aid with a standard "T" coil setting to pickup the handset audio. I hope I've helped, if not, just ask again with a little more detail and I'll try to respond.
you might be using a mono output jack or input jack.....check the jack end...1 ring = mono / 2 rings = stereo make sure your sending a stereo signal in, then check the L/R balance.
You can't usually hear yourself talk on the mic, but if what you mean is that your partner cannot hear you, make sure you have your Recording settings set to the right jack at the right sound card (assuming you have multiple sound cards), if you're using onboard sound and the front panel, you need to make sure that the audio component is set to receive analog signal from the front panel (through Control Panel > Hardware and Sound).
If Audio Select (Page 44 and 98) is set to HDMI you will hear silence if no HDMI signal is present. I think AUTO is the best choice here.
-------
On Page 98 of the manual it says a bunch of things concerning automatic signal detection and input selection.
Initial configuration D) INIT. CONFIG
Use this feature to select the settings of the audio input jack select, active decoders and extended surround when you tum on this unit.
....
Audio select AUDIO SELECT
Use this feature to designate the default audio input jack select setting (see page 44) for the input sources connected to the DIGITAL INPUT jacks when you tum on the power of this unit.
HDMI set E)HDMI SET
Use this feature to select the component to play back HDMI audio signals.
Support audio S. Audio
Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit.
...
CHOICE = RX-V663
FUNCTION
Plays back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit.
CHOICE = OTHER
HDMI component connected to the HDMI OUT jack.
NOTES
This unit transmits audio and video signals input at the HDMI input jacks to the HDMI out jack only when this unit is turned on even if "S.AUDIO" is set to "OTHER".
×