Question about Hotpoint Ultima WD72 Front Load Washer/Dryer

2 Answers

Not drying hotpoint washer/dryer model wd440

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 100 Answers
Re: not drying

There is a thermal fuse wire, yellow fabric on top of the dryer box which may have blown if the dryer filter is blocked with lint.
water from the dispenser usually means a blockage in your pump or filter. maybe at the bottom corner in the front or you may need to look behind the lower rear cover.

Posted on Jan 28, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers
Re: not drying

If you hav'nt fixed it try the element in the dryer unit on the top of the drum check it for continuity have you any flashing lights

Posted on Mar 07, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My Hotpoint Aquarius WD440 smells of hot rubber when it is on the M (drying) programme and the clothes come out smelling of rubber. Can you tell me why this is happening. Everything is working fine...

Hotp[oint Aquarius WD440 washer /dryer - Has a distinct smell from clothes when washed like stagnant water is lying somewhere in the machine, It has all benn stripped down but cannot find anything wrong. Whats the solution????

Aug 11, 2011 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint WD440 creases clothes badly & takes ages to dry

This sounds like excess steam in the drum. Check that the drain filter is clean as washer driers rely on cold water being taken in to cool the condenser tank during the drying cycle. If the filter is clear, the tank may be blocked with fluff. You have to open the machine a look for a big plastic tank, usually down the right hand side.

Dec 11, 2009 | Hotpoint Ariston WD440G Front Load...

2 Answers

Hotpoint aquarius wd440. Flashing lights

press and hold on off button till the display panel lights up.Then press and hold the on/off button and the start /cancel button together.You will now reset the washing machine settings.And just pick your cycle again

Oct 04, 2009 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint washer dryer lights flashing

Check first the thermal fuse.

Test heating element to ensure is not grounded, and staying always on. Test the fan and ventilation system.

If you find no fault in there , then test the timer control board.

Enter the model number on one of two websites below to get parts and diagrams for your appliance:

Appliance Parts From PartSelect

Appliance Parts Pros

Apr 23, 2009 | Hotpoint Ariston Aquarius WD420 Front Load...

1 Answer

Not drying

the steam gets condensed back to water and pumped away so sometimes draining problems cause poor drying. is the machine plumbed in according to handbook?
also your dryer filter may be blocked but this is not accesable without the dryer box being stripped down.

Nov 05, 2008 | Hotpoint Aquarius WD640 Front Load...

1 Answer

Hotpoint wd440 heating but not drying

yes, the dryer is pants im afraid. weve had ours going on 4 years & it has broke down every 6-10months - seriously! the dryer will leave clothes hot & steamy but when hung up for 1/4hr they r dry! _ Hotpoint advised us that he machine is esigned his way - but dont believe a word from their corporate b***hit mouths!

Aug 11, 2008 | Hotpoint Aquarius WD640 Front Load...

2 Answers

Not drying

Is it still under warranty? I've read that these machines are better left at the retailer...

Dec 08, 2007 | Hotpoint Aquarius WD640 Front Load...

1 Answer

WD440 programme m

This sounds like a faulty pcb and/or inlet valve. see links for prices.

meatballs77 - If you have warranty (the machine is less than 1 year old which yours is) or paid for extended cover then call hotpoint to replace... Hotpoint should be able to fix this - this should be free. call 0870 4422 510

Rememer parts are free up to five years - but there is a £90 callout fee after the first year.(unless you extend the full warranty)

Nov 07, 2007 | Hotpoint Aquarius WD63 Front Load...

Not finding what you are looking for?
Hotpoint Ultima WD72 Front Load Washer/Dryer Logo

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 1 Expert

5 Answers


Level 1 Expert

47 Answers


Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides