Question about Casio FX-9860G Graphic Calculator

2 Answers

Connection My calculator isn't allowing me to connect to the computer, says 'No more open file'. How can i fix this?

Posted by on

  • 3 more comments 
  • Anonymous Aug 23, 2008

    i have connection problem with pc, i have windows xp

  • Anonymous Sep 09, 2008

    Same :(

  • Anonymous Sep 09, 2008

    Same :(

  • Anonymous Oct 01, 2008

    the same ay

  • Anonymous Feb 03, 2009

    me too



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just bought mine and ran into the same problem. The fix is easy. First you need to make sure that the software is correctly installed. I installed mine and when trying to connect, couldn't. I had the unit turned on.

a. Because of reading the manual, I turned off my calculator - reconnected it to the computer via the cable. Had the CD (Casio CD) in the drive. The computer reinstalled the software after it auto-turned on the calculator and it worked.
b. Next time I ran into the problem. I had just had it connected to the computer and was editing a program. I exited the calculator and later tried to re-connect and couldn't.

I found that I had to make sure that the calculator is off. Also, you have to make sure that on the software (if it is open all the while) you hit the button at the left side window for the calculator that tells it to disconnect. If it is shown to be disconnected, the connect the calculator while off. It will auto-connect. The rest is easy.

Posted on Jan 01, 2009

  • Grandliseur Jan 08, 2009

    When the calculator is on and you have a "No open File" message, and you have made sure that the wire is connected to both the computer and the calculator:

    You exit onto the main screen; next, access the link menu, click on receive. Go to your Fa-124 program, and click on the small, (quite small) icon at the first left window's upper corner - it shows two computers connected. This established the connection and takes about 20 seconds to run.



Have same problem

Posted on Jun 17, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Can i open second etsy shop with same computer & same net connection please??

no because the codes that are the same as the information on the computer security files, you mite not be able to run the same connect becuase of the address coding will not allow it

Oct 04, 2015 | Computers & Internet

1 Answer

How to open vnc file in my acer E1-571 laptop

A file with a .VNC extension usually is a settings file for a Virtual Network Computing connection. This allows a connection from one computer to another, or a remote access to either your computer or a remote computer. You can search online for compatible programs such as UltraVNC, TightVNC, RealVNC etc... Install this program then you should be able to open the .VNC file. If this is not the expected soultion, in other words, you do not want to connect to another computer, or have another computer connect to your computer, delete the file.

Mar 12, 2014 | Acer Computers & Internet

1 Answer

The system cannot find the file specified

Connect the calculator to the computer and turn it ON. Open the TI connect software. Locate your file on your computer, do a CTRL C to copy. Drag and drop the file on the Main window of TI connect. If file is compatible with TI 84 Plus, it will be transferred to your calculator. Use the Memory management of the calculator to locate the transferred file in calculator.

Dec 17, 2013 | Texas Instruments TI-84 Plus Silver...

1 Answer

How do you get graphs off of your calculator and onto a word document where they can be printed? thank you!

Install the TI Connect software on your computer.
Create the screen you want on the calculator.
Connect the calculator to the computer with the direct USB cable or the TI Silver cable.
Open the TI Connect software (run it).
Make sure calculator is ON
In the main Window of TI Connect, click the button Screen Capture.
TIConnect will search for the calculator and when it finds it, will grab the screen.
Save the file and specify the file type (jpeg, or other). By default it will be saved to the user space My Documents"My TI Data.
Open the Word document and insert the picture file you created in the Word document.



May 27, 2011 | Texas Instruments TI-84 Plus Calculator

1 Answer

How do i connect this terminal to windows 2003 server please give me the settings

Open Remote Desktop Connection loadTOCNode(2, 'summary'); To open Remote Desktop Connection, click Start, point to All Programs, point to Accessories, point to Communications, and then click Remote Desktop Connection.

Create a Terminal Services Connection loadTOCNode(2, 'summary'); To create a Terminal Services connection, follow these steps:
  1. Open Remote Desktop Connection.
  2. In the Computer box, type the computer name or the IP address of a terminal server or a computer that has Remote Desktop enabled.
    Note: To connect to the console session of the remote computer, type computername or IP address /console.
  3. Click Connect.
  4. In the Log On to Windows dialog box, type your user name, password, and domain (if necessary), and then click OK.

Save Connection Settings loadTOCNode(2, 'summary'); You can save a connection as a Remote Desktop protocol (.rdp) file. An .rdp file contains all the information for a connection to a terminal server, including the Options settings that were configured when the file was saved. You can customize any number of .rdp files, including files for connecting to the same server with different settings. For example, you can save a file that connects to MyServer in full screen mode and another file that connects to the same computer in 800×600 screen size.

To save your connection settings, follow these steps:
  1. Open Remote Desktop Connection, and then click Options.
  2. Specify the connection settings that you want for this connection.
  3. On the General tab, click Save As.
  4. In the File name box, type a file name for the saved connection file, and then click Save.
Note: To edit an .rdp file to change the connections settings it contains, click Start, click My Documents, right-click the file and then click Edit.

Open a Saved Connection loadTOCNode(2, 'summary'); To open a saved connection, follow these steps:
  1. Open Remote Desktop Connection, and then click Open.
  2. Double-click the .rdp file for the connection that you want to open.

Copy Files Between the Local Computer and the Remote Computer loadTOCNode(2, 'summary');
  1. Open Remote Desktop Connection.
  2. Type the computer name or the IP address of a terminal server or a computer that has Remote Desktop enabled.
  3. Click the Local Resources tab, select the Disk Drives check box, and then click Connect.
  4. Click Start on the task bar of the remote computer, and then click My Computer, or double-click the My Computer icon on the desktop of the remote computer.

    Note: The drives on the remote server appear with the drives on your local computer. Your local drives appear as driveletter on tsclient, where tsclient is the name assigned to your (local) computer.
  5. Locate the file that you want to copy, right-click the file, and then click Copy.
  6. Locate the folder where you want to paste the file, and then click Paste.

Log Off and End the Session loadTOCNode(2, 'summary'); To log off and end a session, follow these steps:
  1. In the Remote Desktop Connection window, click Start, and then click Shut Down.
  2. In the Shut Down Windows dialog box, click Log Off username, and then click OK.
Amit Bhardwaj

Skype Id:- amit.bhardwaj4

May 05, 2010 | VXL Instruments Itona CE Windows CE VIA...

1 Answer

How do i get the acute.8xv file on the calculator

Connect the calculator to the computer. Execute the TIConnect software. When connection calculator-computer is established (verify that by clicking TIdevice Info in TI connect) drag and drop the file on the TIConnect main window. It will be copied on the calculator.

Jan 13, 2010 | Texas Instruments TI-84 Plus Silver...

1 Answer

My computer doesn't find my calculator

Install the TIConnect software on the computer.
Execute TIconnect. Connect the calculator to the computer through the USB cable or the TI Silvercable. Turn calculator ON.
In TiConnect main window, click the icon TIDeviceInfo. A small window opens. If the result is NOT FOUND, click on communication settings. Select the devive :Ti 84 Plus SE
Select cable type : USB or TISilverCable,
Select Port : Should be USB1
Click OK

If that does not work, try calc-to-calc connection with a working calculator.

Hope it helps.

Sep 23, 2009 | Texas Instruments TI-84 Plus Calculator

2 Answers

My ti-83 plus has OS problem

That happened to me a few years ago - my friend tried to give me his operating system, and my calculator was all locked up like that for a while. There's some kind of reset code - pressing some buttons while putting a battery in - but it's been a while, so I don't remember which buttons.

Apr 15, 2007 | Texas Instruments TI-83 Plus Calculator

2 Answers

Unable to connect calculator to computer.

Try opening the software on your PC. Set the connection to USB and connect your calc. On the calc press the right shift key followed by the right arrow should now recognize the calc.

Mar 19, 2007 | HP 49g+ Calculator

1 Answer

My computer wont read my calculator and my calc. wont work

Try reinstalling the software that came with the calculator. This will fix the problem with the connection between your calculator and the computer.

Dec 20, 2006 | Texas Instruments TI-83 Plus Calculator

Not finding what you are looking for?
Casio FX-9860G Graphic Calculator Logo

Related Topics:

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Office Equipment & Supplies Experts


Level 3 Expert

102366 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Are you a Casio Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides