Question about HP LaserJet 1010 Printer

2 Answers

All the lights are on in hp laserjet 1010 printer i cannot print any page how to solve this problem

At the printing time i already print 2 pages but suddenly three lights are on and stop the printing after this i can not print any page

Posted by on

  • Mangej Kumar
    Mangej Kumar Jun 23, 2018

    Scanning unit change

  • Kenneth Wiker?y Dec 02, 2018

    I had the same problem.
    When the 3 lights was lit, I read in the service manual that the printer was ruined, destroyed, nothing to do with it; Throw it away.

    But that is wrong.

    What I did was;
    -Disconnect USB cable.
    -Close and open the paper tray door.
    -Turn it off-on

    Dont remember the sequence here, but disconnect USB was first step.

    The reason for this happening is probably that you tried a printout from WINDOWS 10 (With a wrong printer driver)!!!

    You probably has just switched from Windows 7 to Windows 10.

    Remember thet windows 10 is 64 bit ONLY. And a Hp1010 printer driver was normally for a 32 bit computer.

    What to do?

    Install a HP printer driver for windows 64 bit.

    Go here;

    search for hp 1010

    You will then get here;

    Then select the one for Windows 64 bit.

    Download it to a place on your disk so that you will find it again.

    Then go to Add Printer and select local printer. have disk and all that and select your downloaded printer driver.

    select port Dot4 I think it was



2 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Change format scanning unit

Posted on Jun 23, 2018

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • HP Master
  • 12,962 Answers

Try a hard reset of printer and/or reinstall the software, Check cartridges for ink and operation.

Posted on Sep 04, 2016

Testimonial: "can you help me to hard reset of printer"

  • 5 more comments 
  • richie46 Sep 04, 2016

    meant toner.

  • Prasanta Karmakar
    Prasanta Karmakar Sep 04, 2016

    help me to hard reset

  • richie46 Sep 04, 2016

    unplug printer while turned on. Then press power button on and hold for about a minute. Then replug cord and turn on.

  • Prasanta Karmakar
    Prasanta Karmakar Sep 04, 2016

    my printer photo

  • Alan Leite Nascimento
    Alan Leite Nascimento Jan 28, 2017

    I am having the same problem. Is it motherboard problem?

  • Mangej Kumar
    Mangej Kumar Jun 23, 2018

    Change format scanning unit

  • Kenneth Wiker?y Nov 30, 2018

    What do you mean? "Scanning unit" ??? This is a laser printer.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My hp 1010 prints only the first page. but from the second page it gives blank print. please help

shake the cartridge well and put it back & check, replace with another cartridge, check half test page if no print on paper check on image on cartridge drum( while printings approx half page open the door remove cartridge & paper check print on paper,on cartridge drum) check transfer roller & replace
If no image any ware replace "Power supply PCA"..

Sep 10, 2011 | HP LaserJet 1010 Printer

1 Answer

My hp laserjet 1010 printer is not printing..just printed the other day and then the next day it didnt print. all the lights (2 yellow lights and 1 red light) are lighted.. hope you could help me.. more...

sometime, it is very silly but true, we forget to check the connectivity of the printer to computer. Plz check unplugin and plug in back the cable attched to printer and computer. Then restarting both computer and printer. If that does not solve, then uninstall and reinstall the printer software.

Jun 08, 2011 | HP LaserJet 1010 Printer

1 Answer

I have an HP laserjet 1010. i got the paper jam

If you are getting correct test page without errors, simply unplug your printer's USB Connection from PC. uninstall Printer drivers and software. restart PC.. Re-Install New Copy of Drivers and Software.. THEN PLUG THE PRINTER USB CABLE TO PC.. try printing after proper driver is installed..

May 30, 2010 | HP LaserJet 1010 Printer

1 Answer

Print two times in one page

it seems that you have change some settings of printer properties. if you don't remember uninstall and reinstall your printer the problem will be solved.

Apr 01, 2010 | HP LaserJet 1010 Printer

1 Answer

Warning ligth is on

check the cartridge of the printer. if you recharged it you have to reset the printer. print a test page and see how many pages it printed so far. if you have 4000-5000 with this cartridge try recharge it and reset the printer. it's one of the common problems for this type of printers

Dec 08, 2009 | HP LaserJet 1010 Printer

2 Answers

It does not print

my printer hp 1010 was printing fine and suddenly stop print take in page and through it out as blank page.

Jul 02, 2009 | HP LaserJet 1010 Printer

1 Answer

One page jammed after switching off when 1 page printed. Orange light on

Hi ,

First off all u switched off the printer and on switch off mode press the green button and on pressing the button switch on the printer hold that button for 5 seconds and then release the button whenever u realese the button the printer start migrating . After migrating if the printer have same problem then u reinstall the printer driver and again reinstall the driver, after reinstalling the driver the printer will working fine .

May 26, 2009 | HP LaserJet 1010 Printer

2 Answers

Trouble Shoot for Printing HP Printer

the problem is with the sleeve that inside the fuzer unit.
it may shredded.. you cant solve the problem by your self.


Feb 22, 2008 | HP LaserJet 1020 Printer

1 Answer

Number of pages tracking on daily basis in hp1018 laser printer

try Printer Test page
The Printer Test page contains information about printer driver and port settings. The page also contains information about the printer name and model, computer name, and so on.
You can print the Printer Test page from the printer driver.
is it on the network? login to the printer using http://<ipaddress of printer>
other option is to contact hp support online.

Dec 12, 2007 | HP LaserJet 1020 Printer

Not finding what you are looking for?
HP LaserJet 1010 Printer Logo

Related Topics:

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts


Level 3 Expert

4345 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Cindy Wells

Level 3 Expert

5798 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides