Question about Hotpoint Aquarius WMA56 Front Load Washer

1 Answer

Kenmore quietpak2 no longer rinse, drain, spin

Our kenmore washer recently stopped working and it stops in the middle and refused to drain, spin.

all the LED lights flash.

lots of noises during the washing.

tried to restart at drain/spin and lots of long delays and noises, water come out really slow/tiny.

anyone has a solution?


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers
Re: kenmore quietpak2 no longer rinse, drain, spin

Sounds like the pump, eighter blocked or needs new pump.Place outlet hose in to bucket to drain, if no water comes out its blocked, if water flows freely possible needs new pump.

Slim jim1

Posted on Nov 27, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a Kenmore washer model #110.20022011. The other day it did not spin out all the way, now it will not start at all. The fill light and lid lock light comes on, but it does not start. Water and...

A friend of mine bought a Kenmore washer model 110.20022013 a year ago. Now washer stopped in the middle of washing and a clicking sound starts, and not washing or rinse or draining

Aug 22, 2011 | Kenmore Washing Machines

1 Answer

Kenmore 70 Series Washer Won't advance in the

Bad timer. Try to find a used one if possible, this item is a little expensive.

Aug 23, 2010 | Kenmore Washing Machines

2 Answers

Stop frequently on spin and rinse cycle F6 code

I have a Kenmore Elite he4t front load washer that was working fine and then we moved and now it stops washing midstream and flashes an F and a H. I have to pause and restart then it will stop washing again after a few minutes and flash the same codes again. I reset again and then it stops with 1 minute left and will not drain.

Apr 06, 2010 | Kenmore Elite 45986 Front Load Washer

1 Answer

Won't complete cycle, stops at rinse. and can't get hot water.

Are you on well water? turn off the cold water to the washer and clean the screen filter out. do not leave filter out.
the machine probably has a cold only final rinse so it won't work properly.

Mar 22, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Washing Machine is not draining in rinse cycle to go to spin cycl

you both seem to have bad lid switches. A bad lid switch will prevent draining and spinning.

Mar 18, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore front-load washer stops at rinse cycle

When the washer initially fills for the wash, is it only hot water entering the drum? Try switching the water temperature between hot and cold as it fills. If any of them show little or no water getting through, it sounds too easy but check to make sure water supply taps are on, and that the cold/hot fill hoses aren't reversed. Remove the fill hoses and check any of the screen filters for blockage (in the hoses and in the inlet water valve). When the machine stops and waits to fill but all you hear is a hum, it sounds like there is power going to the valve but water is not able to get through it.
Good luck!

Mar 03, 2009 | Kenmore 43142 Front Load Washer

2 Answers

98702 Washer Drain/Spin Dead.

My Kenmore 98702 washer Fills and agitates as expected but stops at the end of cycle failing to drain or spin

Dec 05, 2007 | Kenmore 98702 Stacked Washer/Dryer

Not finding what you are looking for?
Hotpoint Aquarius WMA56 Front Load Washer Logo

170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts


Level 1 Expert

5 Answers


Level 1 Expert

47 Answers


Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides