Question about Kenmore Elite Oasis 27052 Top Load Washer

Open Question

Kenmore Elite - Water won't shut off

Kenmore Elite wouldn't stop filling - overflowed. I turned off water at spigots and then was able to spin out the water. If I try to was with the spigots turned on, it agitates, but keeps filling. It will also keep filling when it spins unless the spigots are turned off. I have one load to go, so I'll let it fill, turn off spigots, let it agitate & Spin, turn on spigots to fill for rinse, etc.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: machine fills and agitates, but won't drain

Please empty your machine and run the machine empty. If the washer goes through the whole cycle without any clothes. Please let me know

Posted on Jan 19, 2009

Ad
  • 28 Answers

SOURCE: Kenmore Elite Calypso Washer agitator malfunction

you either have too much stuff in it or something that gets under
the agitator or it has a weak transmission

Posted on Mar 16, 2008

  • 1073 Answers

SOURCE: Water Just Keeps Filling!

replace the water inlet valve, the valve that the black hat and cold lines connect to

Posted on Apr 20, 2008

  • 2 Answers

SOURCE: kenmore elite won't agitate properly

Does the bottom of your agitator work correctly? We had the same problem if you pop the cap off the top of your agitator there is a cam in there with 3 dogs that engage the agitator causing it to spin. If the bottom part is agitating correctly then chances are the dogs in the cam assembly are shot. If the bottom is agitating correctly then it is very possible you have something stuck under the bottom section of the agitator. If this is the case remove the top cover (same as before it's just a lid that pops off) inside you will see a 1/2" square use a 1/2" drive ratchet with a 3" or 6" extension unscrew this piece remove the top section of the agitator then the bottom. Once the bottom is out check to make sure all is clear inside the washer. Reassemble in the reverse order making sure the lower section sits all the way down on the splines for the drive mechanism. If neither one of those solve the problem I would suspect you have an issue in the drive train of the washer.

Posted on Dec 30, 2008

ned_san_jose
  • 234 Answers

SOURCE: Kenmore 90 Series fills with water but would not agitate or spin

You have a problem with the motor coupling. Top-load washers use what's called a direct-drive system, meaning it does not use a belt but what's called a "motor coupling". I probably replace 5 a week because these little guys break because of 2 reasons that i've found.
1) The break mechanism is too dry and causing the basket to stop at a holt, which puts a lot of strain on the coupler.

2) They break because of over-loading. I don't think you're over-loading though because it was find for 5 straight years.

Good luck to you. The repair is kind of hard to do on your own for the first time, so I would call an authorized technician. It will run you anywhere between $90 to $120 at most.

Best of luck!

Posted on Jul 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Top load maytag performa washer won`t stop flling both on wash and rinse cycles.


The switch the tube connects to shuts the water off. Will it cut off on high medium or low level. You can try blowing on the tube to see if it works. It should cut off when you blow.

Oct 15, 2017 | Maytag Performa PAV2200

2 Answers

Water doesn't stop filling tub and tub overflows


the water level sensor is not working and needs to be replaced

Aug 31, 2009 | Washing Machines

1 Answer

Fills with water but doesn't stop


the washer timer control has failed, u will need to replace it.

Jul 23, 2009 | Kenmore 24032\24036 Top Load Washer

5 Answers

Kenmore Elite Calypso washer won't fill with water!


i assume that the warer is turn on at the warer valves if so then do you have voltage at the water valve if not then water pressure switch could be bad or main control board could be bad

Apr 24, 2008 | Kenmore Elite HE4 Electric Dryer

1 Answer

Water Just Keeps Filling!


replace the water inlet valve, the valve that the black hat and cold lines connect to

Apr 19, 2008 | Kenmore 3.5 cu. ft. King Size Capacity Top...

1 Answer

Kenmore 70 Series Top Loan - Fill Cycle won't stop when full


Does the water stop when you push the timer in or are you having to shut the spigots off?? If it stops when the timer is pushed in then you have a problem with the pressure switch. There are quite a few tricks to axcessing your machine's components but if you are handy ill attemt to help.

Jan 12, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore Elite Oasis 27052 Top Load Washer Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2290 Answers

fordexpert

Level 3 Expert

5537 Answers

Ed Mac

Level 3 Expert

731 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...