Question about LG WM1812C Front Load Washer

1 Answer

No runing dear sir, this machine is no runing and code error also plz sive me solution or take this complent.and my adderess is L.MAHESH #420/3,4th corss,1st main,begur road,behind ganesh temple,bommanahalli, no-9980666216

Posted by on

1 Answer

Re: no runing - LG WM1812C Front Load Washer Washing Machines

No working and no disply power

Posted on Jun 23, 2008

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

How to fix the error code E40 on Electrolux EWF1073 Front Load Washer?

I don't have an electrolux, but I have an LG front loader. Mine was giving a simular error code, and I found the drain hose filter was clogged. Bee running fine since

May 07, 2014 | Zanussi ZWF1640 Front Load Washer

1 Answer

Model Gw709AU

When you start your machine is the water just go stop go stop,
Just wait for the machine to display an error code on the wash progress lights and beeps constantly.
It could be the Rotor Position Sensor, out of balance switch or lid magnetic reed switch.
Your error code will determine this.
Is your machine beeping & showing a weird pattern of lights on the wash cycle, It is displaying an error code,
To read this error code you start at the red spin light & work to the left only add up the lights that are on. Red spin light = 1 2nd rinse light =2 1st rinse light =4 last wash light=8 4th wash light=16 3rd wash light=32 2nd wash light=64 1st wash light=128


Feb 20, 2013 | Fisher and Paykel Washing Machines

1 Answer

I have the coad pf appear and it will not spin plz.. help

From the Service Manual for the FAV6800A/FAV9800A page 13 Google ""16022808.pdf"" to find.

PF = Power failure: Power to the machine has been lost during the last cycle.

This may also occur on start up of a new machine due to factory testing.

Check the lid. Press any key to return the display to normal activity.

I know....... real vauge........

Have recycled 120VAC power to the machine? If that bought no joy I would get into Service Mode and see if we can do some basic diagnosis.

This is the 1st PF error code I have seen on any forum. I own the machine and have repaired a few from Outer Tub bearing rebuilds to troubleshooting Console Control board issues. I

Aug 23, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

While machine is runing suddly machine stops and indicates F1 PLEASE GIVE RIGHT SOLUTION TO RESOLVE THE PROBLEMS.

F1 error in your whirlpool cabrio indicates bad control and should be replaced to resolve the error code. However, you can contact Whirlpool as well prior to replacing the control yourself as I have seen whirlpool paying for the parts themselves just because this is known to be a common issue. Good luck

Jun 13, 2011 | Whirlpool Cabrio WTW6600SBT Top Load...

3 Answers

Error code 11 on primus rs16

Error 11 is a water pressure or inlet problem. Check the 1st stage filters in the cold water hoses at the back of the machine.

Mar 03, 2010 | Washing Machines

1 Answer

Whirlpool Dishwasher machine (Mod. ADG 8970/1) wont start. Water is taken in. After several attempts to start an error code "F4" appeared.

Hello Sir,
This error code, " F4 " comes only when the waste outlet is totally clogged with waste and blocked. Try to dismantle the machine and locate the Waste outlet pipe and thoroughly clean it. This will reset the error which is caused.

Thank you Sir, 
Have a nice day.

Jan 13, 2010 | Whirlpool WFW8300SW

1 Answer

Error code ed1 on electrolux ewx14540w washer/dryer

The description of Ef 2 is told as error caused of excessive Detergent. Sir, Please consult another expert seperately for code Ed1. To tell, this error code is not described by anyone.

Thank you Sir, Have a nice day.

Sep 21, 2009 | Zanussi ZWD1470W Front Load Washer / Dryer

2 Answers

My clothes have started to smell musty

  1. take the cloth and put it in a bucket and put some washing powder and just immerse it
  2. after 1 hour put in a washing machine click the washing button
  3. drain it

Jul 18, 2009 | Ariston Technologies Ariston AWD12 Front...

2 Answers

Error message 1E is displayed at start up samsung model SW75C3S

1E error mean there is malfuntion on your sensor pressure. Maybe because the sensor is damage or rusted. You must replaced, it's cost me about $15

May 19, 2009 | Samsung SW62ASP Top Load Washer

3 Answers

Hoover Vision 1600 AAA Washing Machine error code 5

High summerzaman,
the error mean an problem by the temperatur sensor of the water. It is possible an defect of the sensor or cable between the sensor and the microcontroller or the controller self.

with regard Andreas

Apr 11, 2008 | Washing Machines

Not finding what you are looking for?
LG WM1812C Front Load Washer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides