Wd40fx1170 cc i cannot shut off the cc

You must check the settings of both the TV and soundbar to make certain that the right sound type is selected and also that the optical output is switched on and being received.

It is so. Keep it run.

Hi Jim

Sorry
I can't figure out what CC is on a Flat Panel TV!

clean the carburetor clean the fuel line filter adjust the idle screw on the carb as well

hi,
For closing the Closed Caption option do the following.
1. Press the MENU button on the remote to see the menu.
2.Press the up arrow or down arrow until the CC (Close Caption) is highlighted.
3. Press the right arrow repeatedly until CC OFF appears.
4 .Press the menu button to exit.


Or, you also can set Closed Captions by pressing the CC button on the remote. Press CC repeatedly to select: CC-OFF,
ok

I do not know this dvd player, but on most anything with closed caption, you hit the cc button on the remote until you come to '0' or 'off'. As CC has about 6 channels it can use, but really only channel '1' is used. So you might have to cycle through the CC channels until closed caption disappears. Hope this helps. You might also have a setup menu on this DVD where you can control the CC.
Just cycle though it till you get to '0' or off, exit the setup menu.

check the swicthes on the side of the boot

IF THE PC OVERHEATS AND SHUTS DOWN THERE IS ONLY TWO THINGS THAT CAN BE DONE 1) CLEAN UP THE VENTS 2) UPDATE THE BIOS http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=392741&lc=en&cc=us&dlc=en&lang=en&cc=us

You're not doing anything wrong. Your TV is somehow turning the cc on "all by itself". Some bit is getting flipped inside the TV, turning the cc on.

either that or there is some sort of rf or ir interference near the TV that is mimicking the CC button on the remote.

Have you pressed the cc button on the remote, verified the cc is "off" on the TV and then removed the batteries from the remote for a while to make sure there isn't something hinky with the remote???

The "normal way to shut it off" is a little vague to me-- ---Have you tried selecting CC1,CC2,CC3,or TEXT1,2,or3? Take your time selecting caption on functions and thus you will discover how to de-activate cc.I am guessing that since you moved,you can't locate your owners manual??--Last thought-is your source box cc on??