Question about JVC DLA-RS4800U Projector DLA-RS4800U

1 Answer

I have JVC D-ILA projector and we just had thunderstorm and now it won't come back on

Standby/on light is red, lamp light is orange, and warning light blinking red. I have tried unplugging and plugging back in, but no luck.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • JVC Master
  • 3,408 Answers

I had the same trouble with telephone answering machines - every thunderstorm and I would need a new one...

Lightning strikes and near misses and power outages can create mains borne voltage spikes and surges that frequently damage sensitive electronics. These days almost everything is a computer or contains a computer that uses extremely sensitive CMOS chips.

Electronics manufacturers don't make things better than they need to be for obvious reasons and so it is up to the user to protect appliances from damaging surges by using the most expensive of these with a surge protector and by using an area protector.

Since the penny dropped and I invested in a surge protector I haven't needed to replace my answering machine...

Posted on Aug 26, 2016

Testimonial: "I appreciate answer, but we already have surge protector on there"

  • Vernon Taylor Aug 26, 2016

    Well it could have been coincidence that it failed when it did...
    Surge protectors are available in a wide variety of qualities and price ranges offering various levels of protection, though few in my experience offer any guarantees of foolproof protection, especially where lightning is concerned.

    I suggest you read the instruction/information leaflet that arrived with your surge protector.

    A matter of interest, surge protection has a sort of herd immunity effect. One or two in a home will provide a sort of minimal protection but as more are added the protection factor rises disproportionately.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Warning and standby indicator of JVC D-ILA Projector model DLA-X70RBE flashing simultaneously.


Johan, Below are links to your model where you can access,manual,instructions and get support.
Press the helpful button and follow me on fixya for more tips and info.

4K shift ILA Projector DLA X70R Introduction

Replacing lamp on JVC Series Projectors



JVC DLA X3 Warning light issues

Feb 11, 2016 | JVC Televison & Video

1 Answer

The indicator of temperature is red, the indicator of the bulb is off and the fan after 3 o 5 minutes


PowerLite 7800p Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 7800p Multimedia Projector. Support ... Indicator Light, Status, Description... Temperature, Red, The projector is overheating, which turns the lamp off ...

PowerLite 735c Multimedia Projector - Epson

www.epson.com/cgi-bin/Store/support/supDetail.jsp?...oid...

EpsonPowerLite 735c Multimedia Projector ... Indicator Light, Status, Description ...Lamp/Temperature, Red, The projector is overheating, which turns the lamp off ...

Maintenance Indicators - ManualsLib

www.manualslib.com > ... > Notevision PG-F212X > Operation manual
The warning lights (power indicator, lamp indicator and temperature warning... ... Redon. Normal (Standby). Green on. Normal (Power on). Red blinks. Abnormal ... Sharpmultimedia projector model xg-mb67x-l operation manual (71 pages).

Dec 14, 2015 | Office Equipment & Supplies

2 Answers

NEC lt240 lamp light stays off and power light is orange, no Image


COULD HAVE HOUR COUNT LAMP LOCKUP YOU WILL NEED TO RESET HOUR COUNTER BY USING BUTTON CONFIG AND MAINS.

john

www.jvsvisual.com

Apr 15, 2013 | NEC LT 240 Multimedia Projector

1 Answer

Jvc dlax30bu


when i plug in power x30 jvc dila is red light on and lamp light on and the waning light r 6 time flash again and again

Feb 25, 2013 | JVC "DLA-X30 D-ILA 3D Projector"

1 Answer

Optoma HD66 replaced lamp, LAMP WARNING light keeps flashing, still won't turn on?


i just had the same problem i took the top of the projector off and cleaned the color wheel and sensor seemed to have fixed the problem that is for now. seems to happen to me once a year on the dot but last time it was warranty. good luck hope it helps.

Mar 17, 2012 | Optoma Office Equipment & Supplies

1 Answer

I have a NEC VT470 Projector. The power light is steady orange and the status light blinks red 6 times.


steady orange means projector in standby mode
red light 6 times is a lamp error.
either the lamp is old and wont start up or the ballast power pcb is not working.
can you hear the sparking of the high voltage trying to strike the lamp.
if you can then the lamp may be dodgy.
can you borrow one to test it out

Mar 02, 2011 | NEC VT470 Multimedia Projector

1 Answer

What does it mean when that blinking green light turns to orange one in lp 350?


Hi
This would be "Standby"
When you press standby, the display and audio turn off and a blank screen is displayed for 15 minutes.
You can change the amount of time the projector stays in standby mode; see “Standby Time” on page 27 for details.
The LED lights orange while the projector is in standby.
• If you press standby again within 15 minutes, the projector returns to normal operations immediately. The LED changes from orange to green.
• If you press standby again after 15 minutes, there is about a 60 second delay before the lamp turns back on. The LED flashes green while the lamp is re-lighting.
• If you don’t press standby again, the lamp turns off after 15 minutes. The LED lights orange while the projector is in standby.
The full manual can be found here:
Infocus customer support
Infocus LP350 Manual
I hope these help
Mike

Sep 18, 2009 | InFocus LP350 Multimedia Projector

1 Answer

NEC MT1050 Lamp Error


Does the status light stay on red? If it does then the lamp timer has exspired and will not let the projector turn back on until it is reset, at which time you should replace the lamp. To reset the timer you need the remote control, with the unit plugged in in standby mode hold down the power off button for 30 to 45 seconds until the status light goes off.

Feb 05, 2009 | NEC MT850, MT1050, MT1055, MT1056...

Not finding what you are looking for?
JVC DLA-RS4800U Projector DLA-RS4800U Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Office Equipment & Supplies Experts

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a JVC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...