Question about Sunbeam 200 Watts 2484 Hand Mixer

1 Answer

Sunbeam 2484 Beaters won't stay engaged.

The motor is great but the beaters will not lock in and then they fall out. What to do?
Thanks,
Glenn

Posted by on

  • glennkaty Jul 29, 2008

    I have the same problem I don't know what to do

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

In taking apart my same beater, I'm trying to figure out the alignment of the spring which provides the tension so that the beaters won't fall out. I'd assume that your spring has mis-aligned. You need to take it apart (3 Philips screws), and carefully pull the assembly apart. I'll bet your spring falls out like mine did. I'm trying to find a schematic from Sunbeam to see how the spring should align.

Posted on Nov 01, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The beaters will not stay up in my Oster stand mixmaster. The eject lever will not lock them in. Can it be fixed? Or could it be that I need new beaters because they are worn out and do not fit in


wild guess turn beater as you push in to allow the beater to engage the drive, a little like gears meshing. You should be able to feel it lock into the drive.

Dec 21, 2014 | Oster Food Mixers

1 Answer

Beaters will not stay up in my Oster stand mixmaster. The eject lever will not lock them in. Can it be fixed? Or could it be that I need new beaters because they are worn out and don't fit


They need to be replaced or the locking mechanism does, but in the meantime, wind some thread around the beater end and this may keep them in temporarily.

Dec 21, 2014 | Oster Food Mixers

1 Answer

How do I keep beaters in mixer without them falling out?


Each beater may be shaped differently and only will click into its appointed port. There may be a picture on the mixer showing which side to put each beater.

May 12, 2014 | Black & Decker MX55 PowerPro Hand Mixer

1 Answer

Mixmaster junior


This is an issue you will have to take up directly with Sunbeam. Be sure to provide specific model information

Aug 04, 2013 | Food Mixers

1 Answer

I cannot get the beater to lock in place. The


Hi VBPROSANDY, When you say beater, I assume you mean your flat beater. Are you having the same problem with your Wire Whip beater and dough hook? If you are not, then the first thing I’d do is look inside the flat beater’s attachment well, to see that there is nothing; i.e. hardened food, dough or batter, in the bottom of it that would prevent the agitator shaft and groove pin from seating properly. The flat beater has two drain holes at the bottom for drainage, but if these get plugged it may prevent accumulated ‘gunk’ at the bottom from escaping, and over time the buildup may prevent the beater from seating properly.
If you find the beater attachment well is clean, then from the KA Instruction manual, to attach the flat beater...
1. Slide speed control to OFF and unplug.
2. Slip flat beater on beater shaft.
3. Turn beater to left, hooking beater over the pin on shaft.
Finally, check the groove pin on the agitator shaft to make sure it hasn’t become bent so that it doesn’t fit the beater properly. Pins shouldn’t bend, but sometimes they do.
The beater attachment process should not require any effort as the agitator shaft should easily fit into the beater’s attachment well and easily turn to the left. Your planetary should not move during this process and if it does move it will take some effort on your part to turn it. The fact that you’re turning the planetary means you’ve turned the beater as far to the left as it should go to ‘lock’ it. When you get this far, let go and the beater should fall into place on the groove pin.
Good luck. I hope this helps. Howard, Burke, VA
If this solution has been helpful, please rate it, thanks! - hslincoln

Dec 06, 2009 | KitchenAid KP2671 Professional 6 Series...

1 Answer

KitchenAid Artisan Stand Mixer - Tilt is Tilting too Much & hits the bowl!


This may have a simple solution: This sounds like an issue of beater to bowl adjustment, which can come out of alignment naturally over time and with use of the machine.

If the flat beater is striking the bottom of your bowl, this may cause the locking mechanism to loosen and may cause the mixing head to "bounce" during use.

Your Use and Care Guide will cover the "beater to bowl adjustment," which you can do at home in a few minutes with a flathead screwdriver.

Sep 23, 2008 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

Motor runs but the beater does not move


you most likely stripped the plastic gear (Worm gear???).  This gear is designed to fail to prevent the motor from burning out under EXTREME loads (i.e. when a metal piece falls into the bowl). The plastic gear is much cheaper than a new motor.  Look around on this site to see how to get at/repair the gear.  I've found many parts on eBay.com and also PartSelect.com.

Dec 16, 2007 | KitchenAid KSM90 Ultra Power Series Stand...

2 Answers

Beaters fall down


Hi,

You have to change the planet hub and the beater.

Nov 06, 2007 | Kenwood KM800 Major Classic Stand Mixer

Not finding what you are looking for?
Sunbeam 200 Watts 2484 Hand Mixer Logo

Related Topics:

1,213 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Oscar Netto
Oscar Netto

Level 2 Expert

110 Answers

Are you a Sunbeam Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...