Question about Innovage Jumbo Remote Control

2 Answers

Need code-Innovage Jumbo remote for Motorola cable box & GE tv

I have a Motorola cable box and a GE tv. Can you please give me the codes for the Innovage Jumbo Universal Remote so I can set them for my 83 year old father in law?

Posted by on

  • alvis895 May 11, 2010

    I have the exact same problem. My tv is a samsung, and I progragmed it no prob, but the motorola cable box the codes don't work and the manual method, it'll turn off, i'll press enter and then won't turn back on help?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,335 Answers

The codes for a GE TV are: 000, 021, 053, 063, 115, 117, 120 & 134.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
To find the right code for the Motorola box, I recommend auto-searching through the CABLE and SAT code lists.

To have the remote try each CABLE or SAT code it knows one at a time, follow these steps:
  1. Turn on your cable box.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the CABLE or SAT button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the cable box turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the cable box turns off, press the ENTER button to store the code and the LED will turn off.
I hope that helps.

Posted on Nov 22, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My remote will program cable....and turn off, but once i have done that it will not turn cable back on or change channels

Posted on Jan 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Innovage products jumbo universal remote - cable box code


eea1286.jpg
Did you try the above method frim the manual

Dec 26, 2007 | Televison & Video

1 Answer

I need a code for my tv zenith i have a jumbo remote laxmax


Hello
Three digit remote codes for Zenith TV with Innovage Jumbo remote control are:
004 / 005 / 006 / 019 / 196 / 004 / 051 / 083 / 152 / 153 / 154 / 210 / 217
OK.

Jun 20, 2011 | Innovage Jumbo Remote Control

2 Answers

I have innovage jumbo remote. Lost codes. Need for sharp tv and motorola cable box


http://www.remotecodelist.com/remotes/innovage/Jumbo_Universal_Remote.pdf

here you go.

Dec 07, 2009 | Innovage Jumbo Remote Control

1 Answer

Need code for cable box(motorola)and tv(rca) can


The RCA TV codes for an Innovage Jumbo Remote are: 000, 003, 004, 005, 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113, 125, 129, 167, 179, 187, 188, 191, & 194.

To program your remote by entering a code, follow these steps:

  1. Turn on your TV.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the TV button on the remote so that the LED blinks once and then remains solid red.
  4. Enter the first set of 3-digit codes from the list. The LED will blink once every keypress. After the 3rd digit, the red LED will turn off indicating that the code was recognized for the device. If the code was not compatible, the LED will flash several times and you need to return to step 2 to try that code again or to try the next code in the list.
  5. After the LED has turned off, aim the remote at the TV and press ON/OFF. If the device turns off, you have used the correct code and the remote was successfully programed. If the device does not power off, return to step 2 and try again with the next code in the list.
There are so many codes to try, you may want to try the auto-search function that I am going to describe below.

I don't see a code for a Motorola cable box, so I advise using the auto-search function for CABLE or SAT.

To have the remote try each CABLE or SAT code it knows one at a time, follow these steps:
  1. Turn on your cable box.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the CABLE or SAT button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the cable box turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the cable box turns off, press the ENTER button to store the code and the LED will turn off.
To program the remote for your TV, repeat this process starting with turning the TV on, then follow the steps substituting the TV button for the CABLE or SAT button.

I hope that helps.

Nov 16, 2009 | Innovage Jumbo Remote Control

1 Answer

Innovage Jumbo Universal Remote and Comcast Cable


I do not see Comcast cable codes in the manual, so I recommend using the auto-search function for both CABLE and SAT to find one that works for you.

To have the remote try each CABLE or SAT code it knows one at a time, follow these steps:
  1. Turn on your cable box.
  2. Press and hold the CODE SEARCH button for at least 3 seconds until the red LED lights up and stays lit.
  3. Press the CABLE or SAT button on the remote so that the LED blinks once and then remains solid red.
  4. Press the ON/OFF button slowly and repeatedly until the cable box turns off. The LED will blink once each time you press the ON/OFF button.
  5. Once the cable box turns off, press the ENTER button to store the code and the LED will turn off.

I hope that helps.

Nov 11, 2009 | Innovage Jumbo Remote Control

6 Answers

Remote Control Code for Motorola Cable Box


I have a Motorola cable box and used code # 051. Works great. Can't find a code for DIGISTAR tv though. If anyone has one, shoot it to me at deannescollard@hotmail.com.

Feb 22, 2008 | Motorola Mobility DRC800 Universal Remote...

4 Answers

Find Code for Motorola Cable Box which Works for the Innovage Jumbo Remote Control


Had the same problem with my Jumbo Remote - found the code under the "General Instruments" list (051 for me). Also noticed that my cable box has a sticker on the front with a serial number starting with "GI," most likely more evidence of the General Instruments conection. Able to get all the functions to work: guide, menu, etc. Good luck!! - JQ

Dec 21, 2007 | Televison & Video

15 Answers

Code for innovage jumbo remote.


i need codes for innovage jumbo remote

Dec 20, 2007 | Televison & Video

Not finding what you are looking for?
Innovage Jumbo Remote Control Logo

900 people viewed this question

Ask a Question

Usually answered in minutes!

Top Innovage Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

73591 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you an Innovage Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...