Question about Husqvarna Forest & Garden No.967012396 345 16" Gas Chain Saw

3 Answers

Husqvarna Model 141 Chainsaw Carb adjustment

I need to adjust the carburetor on this saw but the adjustment screws seem to need some kind of special tool. They are not a flat head screw. How do I turn the screws on this saw?

Posted by on

  • Anonymous Mar 18, 2014

    How do I adjust carburetor on chainsaw model 358352161

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The tool you need is available from Randy's Engine Repair, on his E-Bay store. The price is about $10., plus $3. shipping. Phone for Randy's is (937) 927-5665. It is usually busy.
Ebay item number is: 390025452838. Buy it online. I got mine about a week after I ordered it.

Posted on Sep 11, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

There is a tool with a spline end unfortunately we could only purchase this from husky.you can try your local dealer.
hope this helps
mark!

Posted on Jul 27, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I removed the carb and slotted the adjustment screws with a dremel tool with cut-off wheel. problem solved! Jim

Posted on Apr 14, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Could some help me with factory carb settings on this saw


Adjustment and Tuning of a Chainsaw Carburetor ' Chainsawr

store.chainsawr.com/.../tuning.../1126042-adjustment-and-tuning-of-a-c...
Carburetor Adjustment for Chainsaws Carburetor adjustment is critical on chain saws ... These saws have what is called a "fixed jet" which is set from the factory.

Stihl Chainsaw Carburetor Adjustment - Tune-up Settings

tekindoor.com > MISC
Stihl chainsaw's have three carburetor adjustment screws (LA) Idle Speed screw - This ... When the engine is tested at the factory the carburetor is set to obtain a ...

How to Adjust the Air and Fuel on a Stihl Chainsaw ' Home ...

homeguides.sfgate.com > ... > Adjustable Mortgage Rates
The fuel/air mixture in any gasoline-powered engine is regulated by the carburetor, and the carburetor in a Stihl chainsaw is factory-adjusted to provide the best performance.... You'll find three adjustment screws for the carburetor, usually located under the air filter cover.

Factory carb setting on Craftsman 2.0 or Poulan Micro ' Firewood


Dec 04, 2015 | Garden

1 Answer

What is carburetor setting on a2.3 chainsaw


There is no fixed carburetor setting on these engines, just two screws to adjust low-end and high-end operation. Special tool may be required, there are about a half-dozen screw head standards. Check eBay for tool. Get the engine to run and idle fast (idle adjust) so it doesn't stall, adjust low-end screw so that engine doesn't hesitate or sputter when accelerated. Adjust high-end screw to run fast and smooth on full throtle. Readjust idle to normal.

Oct 28, 2013 | Husqvarna Craftsman 36cc, 16 In. Gas Chain...

1 Answer

How do i adjust the metering arm in the carb of a model 141 husqvarna chain saw


All adjustments made to the fuel are screw adjusted, three screws are low ideal, high ideal, throttle stop. A flat he'd screw driver should do.

Sep 04, 2013 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

Where can i find a tool to adjust the high and low on the carb of a model 141 husqvarna chain saw


Stihl have a small orange screw driver- a tuning screw driver, it has an arrow on the end to show how many turns you have done when tuning your saw

Sep 04, 2013 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

What tool is required to adjust the carb. on a 142e husquvarna chainsaw?


http://www.ehow.com/how_7241334_adjust-husqvarna-carburetor.html

Nov 19, 2012 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

I can start my chain saw but when I give it more gas it stalls.


Hi jbboitnott,

There are 3 things I can think of that would cause that problem. First, the saw was not warmed up enough. Second, did you cut the choke back after your saw warmed up? The third cause would be that your carburetor is not adjusted correctly.
If you did the first two things, then you could try adjusting your carburetor. The carb has to have a richer mixture when it's cold than when it has warmed up. If you have your carburetor set with the mixture too high, it would start but then choke on the extra gas when it was warmed up. Thus, you should lean out the carb.
Huskys carb adjustment screws are on the same side as the oil and gas fill caps. They are above the gas cap. The screw on the left is for leaning the carb, the one on the right is to richen the mixture.
So, turn the left screw, sometimes marked "L", counterclockwise to richen the carb. Adjust a very small amount at a time. Let it run a little, cut some wood, then adjust again, if need be.

I hope this helps. If it does, I'd appreciate your vote. Thanks for visiting fixya.com

Handie Andie

Dec 15, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

2 Answers

Carburetor tool


Unless you are skilled enough to make your own, you are stuck taking the saw to a servicing dealer as they are the only ones allowed to possess the necessary 'D' head screwdriver. Give thanks to the EPA for mandating the prevention of mal-adjustment pollution.

Jul 07, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

1 Answer

I need to set carb on a husqvarna 455 back to factory


Start with "H" and "L" 1 turn CCW from lightly seated. Then tune for performance like this.
Carburetor Adjustment by Madsens.com
http://www.madsens1.com/saw%20carb%20tune.htm
CW is leaner; to lean will destroy the saw. If over tightened closed (CW) the adjustment screw faces are easily marred; marred adjustments are difficult to impossible to set properly.
Clean the air filter; adjusting with a dirty filter can cause a run lean condition once cleaned and the saw run.

There are 2 wav (sound - idle & full – may not be highlighted) files that I find most helpful, I think you will too. HTH
Lou

Feb 21, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

1 Answer

Can't set carb. on Husqvarna chainsaw.


Most chainsaws and small engines are 1.5 turns out.

You need to set the mixtures for the carburetor. You will find a Low and High adjustment screw. At idle turn the screw in or clockwise until the rps starts to decrease. Then start turning it out till you hit max idle rpms. Turn screw back in a quarter to half turn and it should be idling smoothly. Be careful here and get someone to hold saw if necessary but hold in throttle to full speed and do the same with high adjustment screw. turn it in till rpm starts to drop then back it out until you get to max rpm and it won't go any higher then turn it back in a half a turn.

Jun 20, 2009 | Husqvarna Forest & Garden 125l 18" Gas...

5 Answers

Husqvarna chainsaw carburetor adjustment


Find the 2 screws. There will be a (h) high and (L) low. These are for hig rpms and low rpms. First tighten the screws. Then unscrew them about 1-1/4 turns. Then start the saw and let it warm up. Start with the high rpms first pull the trigger all the way then adjust the screw in 1/8 turns either way until it is running good at high rpms. Then work on the L rpms. Get the saw to idle then pull the trigger, there should not be any hesitation when going from L to H rpms. Just adjust the low same as the High. They have to work together so if the high is good and the low is not just right turn the h a small amount. If you have any more questions let me know

Jun 11, 2009 | Husqvarna Forest & Garden No.967012396 345...

Not finding what you are looking for?
Husqvarna Forest & Garden No.967012396 345 16" Gas Chain Saw Logo

3,414 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...