Sanyo DP42746 42 in. Plasma Television Logo

Related Topics:

Anonymous Posted on Jul 18, 2009

Sanyo DP50740 powers up but no picture or sound

Sanyo DP50740 5o inch plasma powers up but no picture or sound

5 Related Answers

Anonymous

  • 15 Answers
  • Posted on Dec 15, 2007

SOURCE: 42 inch LG Plasma TV - Lost picture

ysus pcb that supplies voltage to the panel is faulty

Ad
A

Anonymous

  • Posted on Mar 09, 2008

SOURCE: 42 inch LG Plasma TV - Lost picture

try connecting tv to cable direct also try unplugging both converter and tv for wile like 5 mins plug both back in see if tv and converter sync

Anonymous

  • 92 Answers
  • Posted on Sep 06, 2009

SOURCE: 50 inch Sanyo Vizon Plasma TV. Has sound but no

This set has LG insides, it will have failed on either the Y-Sustain PCB or the Z-Sustain PCB.

Quite common.

Repair estimates should be $250 - £350 depending on which has failed.

Stick it on eBay, it will fetch good money faulty.

Testimonial: "Thank you for your response. We were driving ourselves nuts - fuzes checked out fine and not other guess where to turn. We appreciate your help!"

Anonymous

  • 1 Answer
  • Posted on Nov 02, 2009

SOURCE: Vizio 50 inch plasma tv has no picture and no

check the Y-sus and Z-sus board

Anonymous

  • 1738 Answers
  • Posted on Dec 09, 2009

SOURCE: 42' plasma won't show picture or sound.

It is your man power supply board.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Where is reset button on sanyo 50 inch tv model DP50740 The TV will not stay on

There is no reset button on televisions. I see that is a plasma set, if you are just losing the picture that is one thing, if the whole set is shutting down, that is another. Please advise
0helpful
1answer

It clicks on then clicks off

It sounds that the TV switches ON, and switches OFF, after three relay clicks. It is likely to the fault to its main board. Contact any service technician. This is not a user repairable fault.
google.com/+GopakumarGopalan
1helpful
1answer
0helpful
1answer

What cable do i need to connect my laptop to my Sanyo DP50740?

Hello jaygee7414,
Sanyo DP50747 not support for D sub conection (PC in).
To connect PC in, you can use DVI or HDMI input.
Some Laptops already have HDMI or DVI out put. Like HP mini, sony vaio.
mas_baz_18.jpg

Or you can use s-video input.
Thanks.
0helpful
1answer

I connected my media center PC to my new Sanyo DP50740 50" Plasma Television using the PC input on the back of the television. The instructions say that it supports 1360X768 with a 16:9 aspect ration...

No,13060 resolutions will not support by some tv correctly,will shift whole picture about to 6 inches to the right.That why,must use the PC Control panel to adjust to 1024 for the video to center.For the wide aspect 16:9 ratio,just find another aspect ratio to for expandsion to fit the entire screen.
9helpful
2answers

Tv keeps turning on and off

You probably have blown capacitors on the PSB-power supply board. Recaping with new UF caps works 90% of the time. The set turns itself of into a fault protection to keep from damaging more components internally. A few bucks a soldering iron some solder should do the trick.
3helpful
4answers

Ysus board number for a sanyo 50'' plasma model dp50747

This is a Sanyo Vizon 50" plasma the model number is DP50747 .. hope this helps the website for this product is www.sanyoctv.com and the phone number is 1-800-877-5032
Not finding what you are looking for?

982 views

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...