Question about RCA RCR311B Remote Control

10 Answers

CODE RETRIVAL FOR A SANSUI TV MODEL

OP MANUAL LOST WOULD LIKE THE CODES RELATED TO MY MODLE AS WELL AS INSTRUCTIONS TO MANUALLY ENTER THE CODE
MY MODLE IS A SANSUI

Posted by on

  • 4 more comments 
  • Anonymous Nov 29, 2007

    same problem

  • Anonymous Mar 16, 2008

    i have a rca control and i need a code to make it work.

  • rsandrat Aug 09, 2008

    I HAVE A SYMPHONIC TV AND TIME WARNER CABLE, AND I'M HAVING TROUBLE GETTING THE CODE. IT WON'T WORK. PLEASE HELP. I'M TO THE POINT OF TROWING THIS REMOTE ACROSS THE ROOM.

  • Anonymous Sep 10, 2008

    same problem here too!

  • Anonymous Jan 05, 2009

    Model Sansui RC03T

  • Anonymous Mar 31, 2009

    lost orginal remote and I can not find the remote for the sansui tv/vrs/dvd combo with universal remote (one for all 0

×

Ad

10 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I lost the remote to my Sansui TV and can't remember the model number. can I get a remote to replace it?, the tv was bought in 2004

Posted on Jan 05, 2010

  • Marvin Seymour
    Marvin Seymour Dec 04, 2013

    neither 1 of the codes listed below worked on my sansui tv, do u have more codes

  • Marvin Seymour
    Marvin Seymour Dec 04, 2013

    im useing an rca universal remote but when i changed batterys it erased and i dont have the codes

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

How can i program time warner cable remote control with sunsui tv

Posted on Jun 22, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 111 Answers

Here is a link to your manual
http://support.rca.com/doc/Device_Documents/manuals/RCR311B_manual.pdf

the codes for a sansui tv are:
Code For Model RCR311B
Code 1191 for Sansui TV Code 1247 for Sansui TV
instructions:
1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).
2. Press and hold the TV key. The illuminated ON•OFF key turns on and remains on. If you release the component key at any time during the Direct Code Entry procedure, the illuminated ON•OFF key blinks four times, and the process is exited.
3. While holding down the TV key, use the number keys (0-9) on the keypad to enter the first code above. While you are pressing the numbers, the illuminated ON•OFF key turns off.
4. After the fourth number is entered, the illuminated ON•OFF key turns on. At this time, release the TV key. If the illuminated ON•OFF key turns off, you have entered a valid code and have followed the correct procedure for Direct Code Entry. If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry, the illuminated ON•OFF key blinks four times when the TV key is released. This is an indication that a programming error has occurred. In that case, repeat the Direct Code Entry process from step 2 and try the next code listed.
5. To confirm that the component key is programmed with the correct code for maximum functionality, test the component. Attempt to control a variety of the component’s functions with the remote. If some of the features of your components do not work, try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component’s functions. Different codes can provide different levels of functionality.
7. Remember to write the code down for future reference

hope this helps,
trin

Posted on Nov 19, 2007

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Sansui combo tv com1320 wife dropped remote broken bought philips universal remote need codes for tv .

Posted on Sep 10, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I HAVE ONLY HAD MY SANSUI TV 3 DAYS AND I CAN NOT GET A PICTURE OR ANY SOUND

Posted on Jan 13, 2010

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am trying to get a Phillis universal remote but i'v heard the the people who make daijitsu tvs are run by Sansui so I tried to use the Sansui code but that did not work as well do you know how to get the right universal remote or how do it properly thanks

Posted on Apr 02, 2011

  • Ryu Thomas
    Ryu Thomas Jan 15, 2014

    Have you found the code? I'm still searching... :(

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

******** PEOPLE, YOU DONT KNOW ****!

Posted on Oct 27, 2008

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My tv sasui modle no sv 2503R i want removet nos sir plase give the no

Posted on Nov 03, 2010

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Sansuei lcd model no. sal32hbg-fla service menu codes

Posted on Apr 04, 2013

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How can change Volume in normal mode. He change booster mode.

Posted on Sep 24, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lost programing instructions and codes


1. turn on device
2. press setup (underneath on/off) till red light stays on the take finger off the button
3. press and quickly release device button (tv,vcr,etc.) the red indicator blinds off once
4. press the on/off button (up to 300 times) until the device is to be controlled turns off the red light blinks off with each button press
5. press and release enter to install code

3-Digits Universal Remote Codes
4-Digits Universal Remote Codes
GE #24912 Universal Remote Instructions
GE Universal Remote Instructions

Apr 15, 2011 | GE JASRM24912 Remote Control

1 Answer

I have a Radio Shack 6 in 1 remote (15-1923) and a Sansui RZ-3000 receiver. Had to change the batteries and lost the connection. What code can I use to make this work again?


The Sansui receiver should be programmed manually. Turn on the receiver manually, then press and hold Setup until the light turns on. Press the button that you want to control the receiver. The light will blink once. Aim the remote at the receiver and press On until the unit responds. When the device turns off press ENT within 5 seconds. If you miss the code, press repeatedly Last and then On until the receiver responds. Then press ENT. Check if the code works. If it doesn't repeat the code search but wait longer between key presses.

To record the code, press and hold setup until the light turns on. Then press the device control button. Then press 0-9 individually (wait a few seconds between key presses) until you see the light blink. That will be the first digit in the code. Repeat the 0-9 sequence for the second and third digit in the code.

Radio Shack has the code list and manual here: http://support.radioshack.com/support_video/42245.htm . Sansui CD player, TV and VCR codes are listed in the documentation.

I hope this helps.

Cindy Wells

Mar 02, 2011 | Televison & Video

1 Answer

We need the tv code for a sansui sled1980a


Hello
Three digit universal remote codes for Sansui are:
135/ 136

Four digit universal remote codes for Sansui are:
0135 0310

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search. OK

Feb 20, 2011 | Sansui 19 in. LCD TV

1 Answer

I have a rca modle 20f420t modle lost remote so bought a sony unaversal one but i need the manufacturer codes and cant find them


Hello
I do not find code for RCA tv to Sony universal remote. Anyway I send you three digit codes for RCA herewith. Just try with entering these numbers. I'm not sure will it work or not.

RCA tv has been listed in Radioshak 6-in one Universal Remote Manual.

RCA Codes: 000/ 003/ 004/ 005/ 007/ 009/ 011/ 048/ 078/ 082/ 083/ 094/ 096/ 098/ 099/ 101/ 102/ 103/ 107/ 113/ 129/ 133/ 167/ 179/ 181/ 187/ 188/ 194


SONY Codes: 002/ 006/ 071/ 128




Direct Code Entry

  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.



Nov 25, 2010 | RCA 20F420T 20" TV

1 Answer

I HAVE A URC-3220 ONE FOR ALL REMOTE AND AM UNABLE TO FIND CODE FOR SANSUI TV. ALSO I AM UNABLE TO FIND MY DIRECTIONS TO ENTER CODE. (MANUAL)


URC 3220 One for All Big Easy Remote Control

059176a.jpg

I can help you to program your One For All Big Easy URC-3220 Universal Remote to control your Sansui TV, and to download the urc-3220 manual.

22b85d5.jpg

Please review my Fixya Tip posts for:

  1. Searching for the proper codes, or
  2. Downloading the URC-3220 users manual / owners guide. This contains all the codes for the brands of devices your remote can control.

I hope that helps.

Oct 20, 2009 | Sansui DTV2760 27" TV

2 Answers

Need manual for sansui vrdvd500


Found the manual here:

http://www.hammerwall.com/Download_Manual/9840/

enter the captcha code

then on the next page right click the MANUAL LINK, and choose SAVE TARGET AS to your desktop.


Hope this helps.

Sep 05, 2009 | Sansui VRDVD5000 DVD Recorder/VCR

1 Answer

Directv remote : need sansui code for tv/dvd combo


Heyo, gotta love 18 year olds like myself, we fix everything :P Seriously though, after searching for awhile, I wen't here and found it (for an rc64 at least). Go to this link and go under tv codes and it has like 5 new codes not listed anywhere else. http://images10.newegg.com/User-Manual/User_Manual_80-150-003.pdf

Aug 21, 2009 | Televison & Video

1 Answer

Need codes for programing universal remote for a Sansui DTV2700


you could always go buy another just like the one you have and get the code sheet out of it and that way you will have a spare one

Feb 22, 2009 | Sansui DTV2700 27" TV

1 Answer

Rcr311w codes for sansui tv/vcr combos


CLICK HERE for your user manual.

There are 4 ways to enter the code.

Thanks for using FixYa - A FixYa rating is appreciated!!

Nov 04, 2008 | RCA RCR311B Remote Control

1 Answer

Want user manual


here is a link to your manual
http://support.rca.com/doc/Device_Documents/manuals/RCR311B_manual.pdf

the codes for a sansui tv are:
Code For Model RCR311B
Code 1191 for Sansui TV Code 1247 for Sansui TV
instructions:
1. Manually turn on the component you want the remote to control (TV, VCR, DVD, satellite receiver or cable box).
2.Press and hold the TV key. The illuminated ON•OFF key turns on andremains on. If you release the component key at any time during theDirect Code Entry procedure, the illuminated ON•OFF key blinks fourtimes, and the process is exited.
3. While holding down the TV key,use the number keys (0-9) on the keypad to enter the first code above.While you are pressing the numbers, the illuminated ON•OFF key turnsoff.
4. After the fourth number is entered, the illuminated ON•OFFkey turns on. At this time, release the TV key. If the illuminatedON•OFF key turns off, you have entered a valid code and have followedthe correct procedure for Direct Code Entry. If you enter a code numberthat is not in the Code Lists or you do not follow all of the steps forDirect Code Entry, the illuminated ON•OFF key blinks four times whenthe TV key is released. This is an indication that a programming errorhas occurred. In that case, repeat the Direct Code Entry process fromstep 2 and try the next code listed.
5. To confirm that thecomponent key is programmed with the correct code for maximumfunctionality, test the component. Attempt to control a variety of thecomponent’s functions with the remote. If some of the features of yourcomponents do not work, try programming the remote with a differentcode in the list until you find the code that allows the remote tocontrol the majority of your component’s functions. Different codes canprovide different levels of functionality.
7. Remember to write the code down for future reference

Sep 05, 2008 | Sansui Televison & Video

Not finding what you are looking for?
RCA RCR311B Remote Control Logo

25,806 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75304 Answers

jason

Level 3 Expert

905 Answers

matt martin
matt martin

Level 3 Expert

1216 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...