Where can I download RYOBI RBV 18 manual, Does it need petro to run or just by electricity?

Contact Ryobi via their website and they will send you the PDF - http://ryobi.com.au/

Hi,

The part number for just the bag is actually PN: 3410071 or ACC019
http://www.ryobi.com.au/Products/Accessories/LawnGarden/Dustbags/ACC019.aspx

Try these folks
http://www.fastflex.co.za/index.php?page=contact

and here also:
http://www.northlawnmowers.co.za/contact-north-lawnmowers-gauteng.html

This will probably be your best chance of getting the part you need:
http://www.ryobi.co.za/
Contact us today:
Email: [email protected]
Tel: +27 (11) 357-9600 // Fax: +27 (11) 805-5541
Physical Address: 604, 16th Street,
Randjespark, Midrand, South Africa

I do wish you the best, Thanks for choosing FixYa,
Kelly

See pages 16, 17 and 18 of your manual for the instructions.

http://dl.owneriq.net/0/0ef35b42-433c-4be9-9621-4e761571c41f.pdf

You will need Adobe Reader installed on your computer to view this. If you don't have it, it is a safe download and it is free.

Check to be sure your chain brake is in the OFF position Pulled back towards the operator

electrical motor was wired in reverse, If you you attempt repair assuming product was purchased from store ,your sure not to get a fund or in-store credit.

Hello Tom, Here's a link to the Ryobi US web site with a free downloadable copy of the manuals for bothe the Ryobi electric chainsaw and a copy of the manual for the 18 Volt Battery versions

Electric Chainsaw
http://www.ryobitools.com/product_manual/file_url/252/RY43006_640_eng.pdf

18Volt Battery Chainsaw
http://www.ryobitools.com/product_manual/file_url/254/P540_P540A_P540B_eng.pdf

I included both, just in case you have a corded version too, since sometimes the Fixya site provides "fill in" information for askers.

I hope you find this Very Helpful and best regards!

http://odref.com/pdf/Ryobi/
If you have your model number, an owners manual should be here with correct mixture ratio for petro to 2 stroke oil.

the nut like end of the tention bolt should fit into a hole in the bar. Then as you unscrew the bolt later one it ill push the bar farther away from the bolt heal thus tightening the chain

Look at http://lawnandgarden.owneriq.net/manuals/mfg/ryobi/ryobi_chainsaw_product_list.html

Call Ryobi Technologies 800-825-2579