Question about Panasonic Kenmore Canister Vacuum Vacuum

1 Answer

Kenmore whispertone 100 model 116. powerhead no

Kenmore whispertone 100 model 116. powerhead no longer works. when vacumming it kept cutting out. when wiggled cord on powerhead it would go on and off, now nothing. is this fixable

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

  • The motor / cord compartment cover must be removed to access the cord reel. There are four screws that hold the cover to the chassis. Two of the screws are found under the cord-retractor-foot-pedal on the top back of the canister. To access these screws the pedal must be removed. To do this, press the pedal down and look (from the top) for the four plastic clips that attach/hold the pedal hinges to the cover. There are two at the end corners and two in the middle. Using a long, thin flat-head screw driver (or similar instrument) press each clip to unhook/popout the hinges. Note: the foot pedal spring will also come out when the pedal is removed.

    The other two screws are found under the curved hinges of the vaccum bag compartment cover. To access these, lift the cover as if accessing the vacuum bag. Keep pulling the cover back until the hinges release from the motor cover. Don't worry, it is disigned to do this and will not break but it may require a little force. A long phillip-head screw driver will be needed to access and remove each screw

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The power head of my 1165581590C Kenmore Power mate Whispertone 12 amp vacuum won't open. It is an older model and it desparately needs a clean!


I am not 100% sure of the model number but most of their powerheads come apart quite easily if you know how. There is a light lens cover on the top of your powerhead. On each side of this cover there is a little clip that holds it in place. You can usually see that spot by simply taking your thumb and pushing the light cover to one side or the other. Place a small flat head screwdriver in that slot and gently pry upward.

Once that cover is off, you will see two screws. Remove those two screws. Now simply grab each side of the cover towards the bottom and back of the nozzle and pull out. This should release it from the base. It will lift from forward from back to front..

Reassembly is pretty easy. Just reverse the instructions.

Let me know if this helps.

Dec 30, 2012 | Vacuums

1 Answer

Doesn't turn on


Gain access to the electrical connection with voltmeter set to 110 v ac check for voltage on both sides of switch. If voltage is present on outlet side follow output wire to start relay ck for power on out put side of relay. if power follow output wire to motor if voltage is present replace motor ! Be careful where you touch when probing contacts !

Dec 29, 2012 | Kenmore whispertone 100 model 116

1 Answer

Sears Kenmore Whispertone Vacuum Problem:


If you push inwards on each side of the light cover on top you can remove it. With the light cover removed remove the (2) access screws. Now you will be able lift of the entire top cover from the base. You will then see the belt and roller brush, remove the old belt and replace with a new one. You can get the replacement belt you need here:

Kenmore Whispertone Replacement Belt

Oct 28, 2009 | Kenmore 23313 Whispertone Bagged Canister...

2 Answers

Belt broke, can't get bottom off


if it's the one in the picture then pop off the light cover by gently pushing in and prying on both sides . Remove the bulb by pushing and twisting , OK?, now see the 2 screws? take them out. now flip over the powerhead and gently pry at both sides toward the rear wheels.
Ta Daa!

Oct 01, 2008 | Kenmore 23313 Whispertone Bagged Canister...

2 Answers

Whispertone powerhead handle release replacement


Use a flat blade, it just prys off, a new on will press on.

May 24, 2008 | Kenmore 23313 Whispertone Bagged Canister...

1 Answer

Kenmore whispertone model 11620412003


I am getting suction to the power mate, but the mate doesn't
work. The belt seem fine, but the light and beater doesen.t
go on. Tried the reset - no result. Thanks

Dec 29, 2007 | Vacuums

2 Answers

My vacum power head wont work


fan belt might have snapped.  take off top by snapping out plastic over light.  good luck!

Apr 18, 2007 | Kenmore 23313 Whispertone Bagged Canister...

2 Answers

Vacums


check belt not broken - could have happened when you caught tassle in head

Apr 18, 2007 | Kenmore 23313 Whispertone Bagged Canister...

Not finding what you are looking for?
Panasonic Kenmore Canister Vacuum Vacuum Logo

1,616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Vacuums Experts

Joseph Hoffmann

Level 3 Expert

1702 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Kevin Getz
Kevin Getz

Level 3 Expert

1031 Answers

Are you a Panasonic Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...