Question about Ricoh Aficio 180 Laser Printer
Ricoh Aficio 180 just started giving an SC402 fault code.Can anybody tell the definition of this code?Tnx.
Transfer roller leak error 2
A current leak signal for the transfer
roller is detected.
A current feedback signal for the
transfer roller is not detected.
• High voltage supply board defective
• Poor connection of the PCU
• Transfer/separation unit set
• Transfer roller damaged
The above is what SC402 means the most common thing is that someone tried to change the toner and pull out the drum unit a little way.
OPen right hand door open front door lift green toner handle press green button and pull toner unit out press the green button further and keep pulling and then the toner unit will come out totally.
To the right of that is the drum unit pinch the unlock and pull out then push all the way back in. Reinstall the toner unit close all covers and turn machine on.
Hopefully this will work if not there is going to be a problem with the other possibilities listed above
Posted on Jan 02, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 15, 2014 | Ricoh Aficio 1015 All-In-One Laser Printer
Aug 24, 2011 | Ricoh Aficio 120 Copier
Jan 26, 2011 | Ricoh Aficio 150 Copier
Nov 12, 2009 | Ricoh Aficio 3025 All-In-One Laser Printer
1,737 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: