Question about LG Electronics LRM-519 Digital Media Recorder

2 Answers

Lg lrm-519 went into demo mode. Can't get it back

Lg lrm-519 went into demo mode. Can't get it back to normal playback.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Follow directions from the owners manual. while unit is powered up, unplug power cord from back of unit - wait 5-seconds. Depress the DVD open/close button while re-plugging the power supply cord to the unit. LG splash appears onscreen and unit goes into re-set. you do not loose any of you programing or settings.

Posted on Jul 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Unplug the unit, hold down the play and stop buttons on the recorder, not the remote, keep holding them, plug the unit in then push the power button...

If it starts clacking and says please wait you are on your way, it will take a few minutes...

Works sometimes. Not always.

Posted on Aug 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a LG LRM 519 and the power supply went out and the component is located at U1 with no part # on the component can you help?


Hello, the component that got faulty identify as U1 is a regulator and this is a 19V regulator as written on the number . do replace for a new one or an equivalent

May 19, 2010 | LG Electronics LRM-519 Digital Media...

1 Answer

LG LRM 519 Parts no longer available


See this thread:
http://www.fixya.com/support/t1426431-lrm_519_replace_capacitors

I have ordered the two new capacitors that should fix the problem.

Mar 27, 2009 | LG Electronics LRM-519 Digital Media...

1 Answer

LG LRM-519 When turns on, hello appears and that's as far as it will go. Any asst. would be great. Thanks.


Sounds like a software error while the dvd is booting up. Did you try unpluging the unit for a while and pluging it back in?

Jan 24, 2009 | LG Electronics LRM-519 Digital Media...

1 Answer

LG Recorder C18 and C36


Check out this video for the solution:

Jan 21, 2009 | LG Electronics LRM-519 Digital Media...

2 Answers

LG media recorder LRM-519 locked up.


REPLACE C18&C36 0N THE POWER SUPPLY BOARD AND GET BACK TO ENJOYING YOUR UNIT!!

Jan 19, 2009 | LG Electronics LRM-519 Digital Media...

1 Answer

Installation of LG LRM DVD Recorder Model 519


be more specific with the problems you're having. following the instructions should be straight-forward. if you are using composite cables from the unit to your tv, be sure the composite/480i/480p switch is et to "composite". it'sa small black switch on the back of the unit. make your selection while the unit is powere off. Finally, the composit cables are usually plugged in to the "AV" inputs on the TV -- make sure you set your TV's input to "AV"

Oct 02, 2008 | LG Electronics LRM-519 Digital Media...

1 Answer

LG LRM-519


There is a good chance that the capacitors detailed in this video need to be replaced:

May 21, 2008 | LG Electronics LRM-519 Digital Media...

2 Answers

LG LRM-519 Not responding to anythiing


I had a LRM-519 that would not get past a very dimly lit "hello" on the LED screen. I called tech support and was advised to make sure no disk was in the unit and turn off the power from the unit (not the remote) and unplug it from the wall outlet. While unplugged, hold down the power button for 30 seconds then plug it back in. This didn't work the first time, but after a few tries it worked for me. My unit hadn't worked for nearly 3 months prior to this. Good luck.

Mar 31, 2008 | LG Electronics LRM-519 Digital Media...

3 Answers

2 units have died. Possible power supply problem


I had a LRM-519 that would not get past a very dimly lit "hello" on the LED screen. I called tech support and was advised to make sure no disk was in the unit and turn off the power from the unit (not the remote) and unplug it from the wall outlet. While unplugged, hold down the power button for 30 seconds then plug it back in. This didn't work the first time, but after a few tries it worked for me. My unit hadn't worked for nearly 3 months prior to this. Good luck.

According to LG support, it would have cost $69 for labor plus parts to repair the unit. The main board/power board is $40.

Jan 04, 2008 | LG Electronics LRM-519 Digital Media...

Not finding what you are looking for?
LG Electronics LRM-519 Digital Media Recorder Logo

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18390 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...