I have been given a Bebecar Color on a Campus chassis and have no harness for it - can I still buy one of these? Also, can I get a manual as I am having trouble folding it down.

If the chassis was manufactured after the end of 2004 and a 'TS' symbol (comprising the letters 'TS' within a triangle) appears on the chassis, then the currently available Bebecar Easymaxi SPP 'TS' car seat will fit onto it. If not, then it may be possible to get a Bebecar car seat to attach to the chassis by means of a fixing kit, but you should contact [email protected] for further advice.

On the Raider AT+ is a tab on the side of the chassis. Operate the lever down to put the front wheels into steering mode, and up for non-steering. An instruction manual, with diagrams, is available from [email protected]

The harness is removeable however we need to identify the exact product you have before the correct advise can be given. If you email [email protected] will the model name they will be able to forward you the correct instructions. You can also speak to an engineer by telephone on 01692 408807

Firstly, remember to lock the swivel wheels in the non steering
mode before folding chair.
To fold, firstly press the red button and simultaneously, turn the handle collar in the direction of the
"FOLD" and the chair will begin to close.
Operate the secondary safety device by pulling the plastic tab.
Tilt the chair forward and continue the folding action until the chassis is fully closed. Why not ask for a user manual at [email protected]

You can purchase a replacement shoulder harness by visiting your local stockist or by contacting Bebecar direct on 01692 408807. You can find you local stockist by visiting the Bebecar website http://www.bebecar.co.uk/stockists/stockists.htm

Yes, the same hood is used for both the carrycot and the pushchair seat, the hood's bayonet clips being inserted into the relevant slots. Instructions for chassis and seat unit can be requested at [email protected]
Remember, though, that "Adventure" is actually a fabric range as opposed to a model type!

If you have a "TS" system. The letters "TS" will be inside a triangle on the side of the seat or chassis. You can also visit your local stockist or contact Bebecar direct on 01692 408807 for more info.

Did you manage to get one? I have an immaculate one which is 5 years old and am now pregnant and it doesnt fit the new pram/chassis which I have just bought. Could sell to allow me to buy a maxi cosi. Husband doesnt want to fork out as the bebecar one (with the appropriate adapters is like brand new condition. If you are still struggling, let me know and we can maybe see if it will definteley fit and was similar to mine.
Cheers
AD

i also found this annoying, the tracker chassis is similar to the ip-op chassis, which you can find instructions for online.
however when the chassis is folded, you first have to adjust the handle, to do this you push in the round black buttons either side of the handle, make sure the handle is in a strait line with the rest of the chassis. also check that the front wheels are in NON steering mode by pushing in the red button on the left hand side of the chassis.
once this is ok, you go back to the handle and push in the red button in the middle of the handle that confusingly says fold, as you push the button in, twist the black fold casing downwards, put your foot on the bottom crossbar and pull the handle towrds you. the chassis should start unfolding keep pulling the handle and pushing the bottom cross bar with your foot until the chassis clicks and locks on both sides.
da dah!!!!! there you go. now wait till want to fold it again bloody thing is a nightmare without instructions.

Dorel Juvenile Group is the company you contact for any thing dealing with eddie bauer

Misplacing product instruction manuals can be such a headache. That’s why a downloadable version of many of our instruction manuals are available right here online. Simply fill out the form below and click Search!

link: http://eddiebauer.djgusa.com/instructions/
call for help: (800) 544-1108

(7 a.m. to 6 p.m. EST Monday through Thursday,
and 7 a.m. to 4:30 p.m. EST on Fridays)

OR

Need a replacement part?
To obtain a replacement part for one of our products, please call Consumer Relations at 1-800-544-1108. We?ll get the replacement part out to you as soon as possible.

If you prefer, please feel free to contact us via:

Mail:
Dorel Juvenile Group
Consumer Relations Department
P.O. Box 2609
Columbus, IN 47202-2609

Fax: 1-800-207-8182

Phone: 1-800-544-1108
(7 a.m. to 6 p.m. EST Monday through Thursday, and 7 a.m. to 4:30 p.m. EST on Fridays)