Question about HP VGA Webcam

1 Answer

Why can't I hear my voice only the computer on my webcam it says it has an integrated mic why cant anyone hear me????

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers

Go to Control Panel and Click on Sounds, Click on Audio, then Click on the Microphone. Then Click on the drop down and select Camera Microphone or Headset.
Click OK and it should work.
Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your Computer does not set it up to broadcast on messengers or Skype. Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:
After downloading and installing Skype (http://www.skype.com/intl/en-gb/download/skype/windows/beta/downloading/) set it up as follows:
1. Go to Tools, then Options, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
2. Then click on the Video Settings.
3. The camera if Installed Properly will come up and show a video picture.
4. Then, on the bottom of the page click on Save.
The camera and audio should function properly. Your friends and Family will now be able tosee and her to you.

B. Yahoo Setup:
After downloading and installing Yahoo Messenger (http://www.soft32.com/download_30.html) set it up as follows:
1. Go to Messenger at the top left and click on it.
2. Next go down to Preferences and click on it.
3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.
C. Windows Live Messenger:
1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
3. Next go to the Menu Bar on right side, click on “ “Action.”
4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: Your audio and video should work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
D. AIM (AOL) Messenger
Go to this site http://dashboard.aim.com/aim and Launch AIM AOL Messenger.
1. On the VIM sign-in window click on Edit.
2. Then click on Settings Enhanced IM.
3. Next click on Enhanced IM.
4. Then click on Audio Video.
5. The Audio and Video portion has drop downs so you can select the proper audio card and video camera installed in you computer.
The Audi Video drop downs are
Microphone
Speaker
Camera
The audio and camera should function now.

Additional information to use with VIM settings,

Adjust Your Audio and Video Settings:
In order to adjust your audio and video settings, please follow the steps given below:
1. Click the Audio and Video Settings button directly below the My Buddy or My Camera window. If you are currently participating in an AOL Live Video IM session, a message will display: You must disconnect the current AOL Live Video IM conversation before running setup. Would you like to disconnect now? Click the Yes button.
2. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
Notes:
· The first time you use AOL Live Video IM, a message will display: Would you like to first check your audio and video settings? Click the Yes button. The Audio and Video Tuning Wizard will appear to help you verify that your camera, speakers and microphone are working properly. Follow the on-screen prompts.
· images in AOL Live Video IM may appear reversed, or as a mirror image (text may appear backwards) when you look at your own camera feed or at the picture-in-picture (PIP) display.
After making the settings your ready for a chat and video talk with your Family and Friends. Hope this helps. Bud

Posted on Aug 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Who ever i'm talking to cant hear me!


Make sure your webcam mic is set as the default mic
Plug in the webcam

Typical audio set up

Laptop with mic x webcam with mic x Vista x Yahoo Messenger 10
If you have an earlier OS, you may have to access your hardware from the Control Panel.

TEST SPEAKERS
Right click on speaker icon in System Tray or from Control Panel
Select "Playback Devices"
The speaker icon ( checked as working) and volume level graph should be visible
Right click on the volume graph and click "Test"
Left hand speakers followed by right hand should be heard

SET DEFAULT & TEST MIC
Click "Recording" tab.
To set required (webcam) mic as default - click on mic font to highlight and click "Properties"
In lower dropbox display "Use this device enable" click 'OK'
Click "Levels" tab and ramp up sliders ( adjust to suit later)
Return to "Recording". Test mic by speaking and make sure volume graph displays

Restart computer

CONFIGURE TO YAHOO MESSENGER

Open messenger - on top toolbar. Left click ( > ) Messenger > Preferences > Connection - Select 'no proxies' or 'connect direct to the internet' depending on the version of messenger you have
make sure your internet connection and country are correct in the lower two boxes > Apply > OK

Click ( > ) Messenger > Preferences > Video and Voice

Jul 16, 2010 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

I set up my web cam and i hear my sister when she talks but she cant hear me


well the first thing that you got to check is that if the web-cam has an inbuilt mic to it
If there is no mic then you will have to attach a seperate mic/headset for voice
Also check if its USB port or normal Audio/Video output...if it had audio/video cable then you will have to attach both the cable to the correct port in the Cabinet
If it has USB output cable with inbuilt mic then try to unistall and reinstall the driver software and attach the the webcam only after installing the drivers

Jun 14, 2010 | Logitech Webcam

1 Answer

Why i my chat mates cant hear my voices when im talking.


Numer of reasons. Your Mic may be muted. Unmute it in the Audio icon in the right bottom corner. The settings of your IM are incorrect. Set the Mic.

Aug 15, 2009 | Microsoft LifeCam VX-1000 Webcam

5 Answers

Audio on Dell Webcam Central And voice record isn't working


I have a Dell 1545 with Dell web cam central & I've had this issue. The problem is that Dell web cam central installs it's own microphone settings onto your laptop called something like Dell web cam Live!. This isn't the built in microphone in my laptop & maybe not yours either. You have to change the settings for your computer system & Dell web cam central. Go to start> control panel> sound> recording .. on mine there is an option for Microphone "High Definition Audio Device" ... that is the built in mic. You want that for your default & apply it. Also .. as a side note .. I disabled the web cam central Live! microphone completely from this window. Then open Dell web cam central & go to the "Record Video's" option. In the middle of this is an orange button with a video camera icon. Next to this on the same button is a little arrow pointing down .. click that. Under microphone .. choose Microphone "High Definition Audio Device" just like the sound option in control panel. I've done this & it's completely fixed. I can record videos with sound & use my built in mic in voice/video chat.

Aug 15, 2009 | Dell Inspiron 1545 Notebook

1 Answer

Cant talk cam 2 cam and voice in msn


Open msn
Plug webcam in
Click (>) show menu > tools > audio and video set-up > run through mic and speaker tests > next > set your camera as defaut and adjust settings > finish

Aug 08, 2009 | Creative Labs Live! Cam Voice Webcam

1 Answer

We both see eachother and they can hear me but i cant hear them


It is an easy fix on Skype, I am assuming that is the program you are using for video conferencing. If not you will have to do just about the same thing to correct it. In Skype go to the tools selection on the top bar, select options from the menu, select audio settings and use the drop down selection list and change the source to the USB Mic on the camera from the current selection. You should be able to hear them once this is done. In other programs you need to do just about the same thing since windows uses the default mic. plug in the back of the computer. You just have to change it to the correct source for the mic. Good Luck, RAC

Mar 03, 2009 | Logitech QuickCam Connect Webcam

1 Answer

No sound when connected on aim


Is your microphone integrated into your webcam? Make sure the correct device is selected. Go into Edit, Settings, Enhanced IM. Under Audio and Video, make sure the Microphone device selected is a functioning mic, such as Logitech Mic, or if using a headset, select the USB headset (if usb) or your sound card if using a mic plugged into your built in or add-on sound card.

Dec 01, 2008 | Logitech QuickCam Connect Webcam

1 Answer

Cant get mic to work on webcam vx3000


check that pc sound proteries are set to usb camera and not your computers own sound card . can be check via properties on speaker in task bar. Right click speaker and sellect adjust audio properties and make sure usb camera is selected for voice recording.

Sep 03, 2008 | Microsoft LifeCam VX-3000 Web Camera

1 Answer

Laptop's Audio does not work in voice chat


There is a specific download for this. Your best bet is contacting Yahoo and asking them where to find it.

Jun 25, 2008 | Dell INSPIRON 6000 CENTRINO...

Not finding what you are looking for?
HP VGA Webcam Logo

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...