Question about Mitsubishi VS-50707 50" Rear Projection Television

1 Answer

Problems with t.v.

My Mitsubishi big-screen t.v., Model #BS60604, comes on when I press the power button, then the t.v. goes off. The three lights, blue, green, and yellow in the back of the t.v. do come on but is not bright. What would be the problem - the picture tubes???

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Mitsubishi Master
  • 5,138 Answers
Re: Problems with t.v.

Remove crt board one at a time,when set comes on and stays on then that tube is shorted, try red first.CRT on NECK of tube!

Posted on Nov 19, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Mitsubishi big screen HD 1080 series model WS-55809. it switched off one day. and when i turn it back on it switches right back off. red light in front. what part do i need to fix it/

That model does not have a red light---Green.

If set powers up for a few seconds (green power light) and goes out do the self check the model indicated has:

On front of set (not with remote) press and hold both the input and menu buttons for at least 5 seconds and release both.

Green power light will blink a two digit error code like 2 blinks, 2 blinks a pause and repeat it several times.

Let me know what error code you find (if you have unplugged the set that will clear all errors and you have to plug it in and try to turn set on again---when it fails do the self check)

Mar 31, 2012 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Our WS-55313 Mitsubishi Projection screen tv was on then just died. When we push power button or remote on, the green power light comes on for a couple of seconds then the tv goes off .

do the self check this model has.

When green light goes off press and hold both the input and menu buttons for five seconds and release both buttons.

The power light will blink a two digit error code like, two blinks, two blinks, a pause and then repeat it several times.

let me know what the error code you find is and I will let you know what it means.


Dec 26, 2010 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

When the tv plugged up the power led blinks 3 times. When the power button is pressed the tv comes on for three seconds and turns back off. What could be the problem? Could this be a convergence problem?

Do the self check when power light goes out:

ON front of set (not remote) press and hold both the Menu and Input (Device) buttons at same time for 5 seconds or longer and release both buttons.

Power light will blink a two digit error code like 2 blinks, 2 blinks, a pause and repeat it several times.

Let me know code.


Sep 24, 2010 | Mitsubishi WT-46809 46" Rear Projection...

1 Answer

I have a Mitsubishi 65" Big Screen TV (WS-65909). I cannot turn it on. When I press the power button, the "Timer" light stays on for about 3 seconds and then turns off and nothing happens. TV does not...


After you turn it on and the power light goes off:

On the front of the TV press and hold both Menu and Input (or device) TOGETHER FOR AT LEAST 5 SECONDS AND THEN RELEASE BOTH BUTTONS.

Power light will blink an error code---for example: 2 blinks, a pause and 2 blinks.

Let me know what error code you find and I will tell you what it means. 2,2 is most common and the least expensive to fix.

If this information has helped you, rate this solution as I DO THIS HERE FOR FREE.

sd tech

Nov 09, 2009 | Projection Televisions

1 Answer

Problems w my mitsubishi hdtv big screen

Typically this is a indication you have a Power Supply problem and not something you can fix with out a repairman unless you have knowledge of the Power supply Circuits in these models . Play it safe. Get a repairman who is authorize by Mitsubishi to look at it.
Hope this Helps,

Jun 28, 2009 | Mitsubishi WS-55513 55" Rear Projection...

1 Answer

My big screen tv

Those are the two 5amp pico fuses that go out when the convergenec Ics go out on a mitsubishi. You can get the ICs and pico fuses at the following link. If youre not sure which ICs you need leave them a email with your model nuber.Heres the link

Sep 01, 2008 | Projection Televisions

2 Answers

It won't power up

You need the HV splitter. You can leave a email at the following link state your model number and let them know you need a HV splitter. They will respond quickly to your inquirery and they will provide free tech support to explain how to change the part.

Jul 01, 2008 | Mitsubishi WS-55819 55" Rear Projection...

2 Answers

Mitsubishi ws65869 big screen tv

Does the LED power light come on? Have you checked the fuses?

Feb 03, 2008 | Mitsubishi WS-65809 65" Rear Projection...

Not finding what you are looking for?
Mitsubishi VS-50707 50" Rear Projection Television Logo

Related Topics:

54 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1187 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

66330 Answers

Are you a Mitsubishi Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides