Question about Kicker ZR240 Car Audio Amplifier

1 Answer

The problem is with the sound chip. from being pluged in so many times the accepter has worn out. i had removed the chip accepter but in the process tore the connections from the circut board behind it. i would like to know how to fix it or bypass it all together

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Try make new traces to circuit board by soldering it will be hard depending on how small the trace wires are

Posted on Nov 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Our 65" Mitsubishi rear projection screen has developed spots, like stars. Is this fatal, or is there a cleaning process that will remove the spots?


sounds as if you may need to degauss (remove residual magnetic field) your set, such magnetism can cause the final image to become distorted. many televisions have a degauss utility in their menues

Sep 14, 2014 | Mitsubishi WD Televison & Video

3 Answers

IMac


There are no fuses. try removeing the one of the memorys and then both. insert the old memory and see if it starts up.

let me know how it goes.

Aug 24, 2008 | Apple iMac G4 Desktop

1 Answer

Power button does not work vostro 1700


LOL, sounds like a lemon. I would think either the memory, power cord or CMOS battery might be the cause. But since it boots each time after you go thru the process you described it has me baffled.

Maybe one of your memory chips is bad.

Remove the Power Cord, Open the Case and remove one of thememory chips. Set the chip aside then try rebooting the computer. If it boots, then you know the memory chip you set aside is bad so mark an x onit with an ink pen. If it fails to boot then move the chip to the nextmemory slot and try rebooting. If it fails take the chip out and set itaside, then put the other chip in and try booting it in both slots. If itboots, just to verify that the chip set aside is bad, mark an x on it and putit into the open memory chip slot and try booting.

Mar 31, 2012 | Dell Vostro 1700 Notebook

2 Answers

What is modding....how to install ext hard drive on the ps2 slim scph 90004


Modding is the process of putting a mod chip in the ps2 to read burned games and to hack games. I wouldn't recomend doing it because it is highly illegal.

Feb 27, 2011 | Sony PlayStation 2 (PS2) Console

1 Answer

Fan is very noisy not sure it is effective


Hi,

A noisy fan is usually a sign to say it is worn out, it will pay to have it replaced as they are not fixable. If it is not working to its full capacity which it sounds like it isn't it will cause overheating problems later on and you can damage your processing chip which will mean replacing the motherboard or chip.

Get it replaced as soon as you can.

Hope this helps.

Thanks
Jason

Oct 19, 2010 | Toshiba Satellite M35X-S149 Notebook

1 Answer

I added new office max brand ink cartridge to my hp psc 2210 printer and i keep getting a "remove and check cartridge". i took inkcartridges out and replace the ink cartridge a couple of time and still...


A lot of branded ink pots have chips in them some dont it sounds like your hp printer is not getting the correct response from these ink pots , you could try to override the report and tell it to print anyway

Sep 19, 2010 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

New speakers do not work. Lime green cable


Re-starting the PC won't do anything for the speakers. The PC can't see them! What it can see is the sound device, card or on-board chip. If you had a previous pair of speakers working on the same connection, it seems unlikely that your sound device is to blame. Try slowly removing and re-inserting the plug a few times whilst some music is playing to see if the sound suddenly comes on. Some of these plugs are not too good at making connection! If this is unsuccessful get back and I will take you thro' proceedure to check your sound device. Ian. P.S. Take it the power light is on the speakers?

Sep 20, 2009 | Cyber Acoustics CA-2012 Computer Speakers

1 Answer

I HAVE A PINTER PIXMA 1600- WITH NEW CARTRIDGE, BUT THE PRINTER TELL ME THAT NOT RECOGNIZED THE INK CARTRIDGE AND SHOW ME SERVICE ERROR 5600. WHAT CAN I DO ?


A few basic causes.

1. The cartridges you bought were not original equipment ones (OEM)and many "clone" cartridges are known to have problems with the ink level chips

Take them back and get them replaced with a different brand

2. They are original cartridges but may still be faulty (rare but possible)

Take them back and get them replaced

3. Your print head is clogged or faulty

Run your printer through the head cleaning process a few times and see if it clears up.

4 your cartridges are out of alignment

run the cartridge alignment process

If you are filling them yourself then...

Cartridge ink levels are usually monitored by a small chip on the cartridge. If that cartridge is allowed to fall below 25% ink level most chips then become locked and not able to re-set.

For many cartridges you can buy a reset device to reset chips that have not become locked. Or you could buy empty cartridges that don't need resetting and that will always accept a self refill.


If this information was useful please click below

Aug 18, 2009 | Canon PIXMA iP1600 Printer

1 Answer

Computer wont boot after memory upgrade


when working on computers you have to be carefull to ground your self before touching the inside of them. when installing memory you dont need to unpluge everythinf just the main power cord on the back of it.the blinking green light means you have something no pluged in right,double check everything you unpluged make sure it back in the right areas.on memory the slots are mark 1,2,3,4
make sure if the memory is diffrent in speeds the lagger ons go first.the first to slots normally have to be the same speed and size ram.if that does not work let me know i can look into it for you.

Dec 15, 2008 | ASUS P5RD1-VM Motherboard

1 Answer

Not accept sound driver


Either can be currupted driver software or can be CD.

Oct 30, 2008 | Intel PENTIUM-4 865GV CHIP MOTHER BOARD...

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kicker Car Audio & Video Experts

Professor_V
Professor_V

Level 2 Expert

92 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

300 Answers

yadayada
yadayada

Level 3 Expert

76848 Answers

Are you a Kicker Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...