Question about Heating & Cooling

1 Answer

How to set time on remote model ast14rvcaw - Heating & Cooling

Posted by on

  • shanebus Jul 18, 2009

    Yes trying to set the current time of day on the remote control for air conditioner

  • shanebus Jul 18, 2009

    its a fujitsu air con

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

What are you trying to set? That model number doesnt bring anything up for me... it is an air conditioning unit like you listed it as right? Are you trying to set the time on a remote? Can't understand what you're looking for here.

THanks

Tim

Posted on Jul 18, 2009

  • Tim Grayson
    Tim Grayson Jul 18, 2009

    What is the make of the unit? That part number doesnt pull up anything in my databse.

    Let me know

    Thanks

    Tim


  • Tim Grayson
    Tim Grayson Jul 18, 2009

    To Use the ON timer or OFF timer
    1 Press the START / STOP button (Fig. 5 J).
    (if the unit is already operating, proceed to step 2).
    The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
    2 Press the TIMER MODE button (Fig. 5 H) to select the
    OFF timer or ON timer operation.
    Each time the button is pressed the timer function changes in the following
    order:
    The indoor unit’s green TIMER lamp (Fig. 3 6) will light.
    3 Use the SET TIME button (Fig. 5 S) to adjust the
    desired OFF time or ON time.
    Set the time while the time display is flashing (the flashing will continue
    for about five seconds).
    + button: Press to advance the time.
    – button: Press to reverse the time.
    About five seconds later, the entire display will reappear.
    To Use the Program Timer
    1 Press the START / STOP button (Fig. 5 J).
    (if the unit is already operating, proceed to step 2).
    The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
    2 Set the desired times for OFF timer and ON timer.
    See the section “To Use the ON Timer or OFF Timer” to set the desired
    mode and times.
    About three seconds later, the entire display will reappear.
    The indoor unit’s TIMER Indicator Lamp (green) (Fig. 3 6) will light.
    3 Press the TIMER MODE button (Fig. 5 H) to select
    the PROGRAM timer operation (OFF ON or OFF
    ON will display).
    The display will alternately show “OFF timer” and “ON timer”, then change
    to show the time setting for the operation to occur first.
     The program timer will begin operation. ( If the ON timer has been
    selected to operate first, the unit will stop operating at this point.)
    About five seconds later, the entire display will reappear.
    About the Program Timer
     The program timer allows you to integrate OFF timer and ON timer operations in
    a single sequence. The sequence can involve one transition from OFF timer to
    ON timer, or from ON timer to OFF timer, within a twenty-four hour period.
     The first timer function to operate will be the one set nearest to the current time.
    The order of operation is indicated by the arrow in the Remote Control Unit’s
    Display (OFF ON or OFF ON ).
     One example of Program timer use might be to have the air conditioner automatically
    stop ( OFF timer ) after you go to sleep, then start ( ON timer) automatically
    in the morning before you arise.
    RESET OFF ON
    PROGRAM (OFF ON, OFF ON)
    To Cancel the Timer
    Use the TIMER MODE button to select
    “TIMER RESET”.
    The air conditioner will return to normal
    operation.
    To Change the Timer Settings
    Perform steps 2 and 3.
    To Stop Air Conditioner Operation while
    the Timer is Operating
    Press the START / STOP button.
    To Change Operating Conditions
    If you wish to change operating conditions
    (Mode, Fan Speed, Thermostat Setting,
    SUPER QUIET mode), after making the
    timer setting wait until the entire display
    reappears, then press the appropriate
    buttons to change the operating condition
    desired.
    To Cancel the Timer
    Use the TIMER MODE button to select
    “TIMER RESET”.
    The air conditioner will return to normal
    operation.
    To Change the Timer Settings
    1. Follow the instructions given in the
    section “To Use the ON Timer or OFF
    Timer” to select the timer setting you
    wish to change.
    2. Press the TIMER MODE button to select
    either OFF ON or OFF ON.
    To Stop Air Conditioner Operation while
    the Timer is Operating
    Press the START / STOP button.
    To Change Operating Conditions
    If you wish to change operating conditions
    (Mode, Fan Speed, Thermostat Setting,
    SUPER QUIET mode), after making the
    timer setting wait until the entire display
    reappears, then press the appropriate
    buttons to change the operating condition
    desired.


    SLEEP TIMER OPERATION
    Unlike other timer functions; the SLEEP timer is used to set the length of time until air conditioner operation is stopped.
    To Use the SLEEP Timer
    While the air conditioner is operating or stopped, press the
    SLEEP button (Fig. 5 R).
    The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) lights and the TIMER
    Indicator Lamp (green) (Fig. 3 6) light.
    To Change the TIMER Settings
    Press the SLEEP button (Fig. 5 R) once again and set the time
    using the SET TIME buttons (Fig. 5 S).
    Set the time while the time display is flashing (the flashing will continue about five


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an old sanyo analog vcr and I need to set the time and date


You will need the remote for that. Select the main menu, then look around for time setting option. You will probably have to use either the arrow keys or numbers on the keypad of the remote to set the date. Some models will have an OK button to set the date/time on each part. If you see an auto setting for the clock time, set it to off, as broadcasters no longer set a time out for analogue models.

Oct 05, 2016 | Sanyo Televison & Video

1 Answer

Bought used without remote. I need to set the time can I do that without a remote?


I don't think you can set the time without a remote on that model. You could find a universal remote that will let you access the menu and set the time, just do a little research first and make sure you find one that will be fully compatible with that model, as some universal remotes do not fully support some options, such as the menu on some models.

Sep 19, 2013 | Toshiba W512 VHS VCR

1 Answer

Sir i want panasonic tv remote model number my tv model pc21psr


There is no Such model set for Panasonic Till time. Your set might have a duplicate one from China.

Aug 30, 2012 | Televison & Video

1 Answer

Remote wont get fpa off


Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.

1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked

3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.

Aug 24, 2012 | RCA Universal Remote Control

1 Answer

The power went out and my RCA tv needs to have the time set to continue watching. But the remote does not work, and I can't access the menu from the tv


Hello
If the remote control doesn't work, just buy one RCA RCR model universal remote control. Without remote control, you can't set the time to this set.

Mar 04, 2012 | RCA Televison & Video

1 Answer

Have a model # G35830WK that is in parental control how do we get it off


Hello
You should have its original remote control to unlock this set. If you ahven't one, just try to get it from any of your friends or relateives, who owns the same type of set. After unlock, you can use any other universal remote control. To unlock it:
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
**If you have the original remote (RC-A07) for Sinotec tv, then press and hold down the Music button for about 10 seconds
OK.

Jul 08, 2011 | RCA Televison & Video

1 Answer

Rca model 20f510td. parental lock


Hello
You must have its original remote control to unlock the parential lock. If you haven't it with you now, try to buy it or gather it from any of your friends or relatives who owns the same model; just to unlock it. After unlock, you can use universal remote or so.
Most RCA TV sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET.
OK.

Jul 05, 2011 | RCA 20F510TD 20 in. TV/DVD Combo

1 Answer

How to unlock FTA?


Hello
you must have its original remote control to unlock the set. If you haven't its original remote handset with you, try to borrow it from any of your friends or relatives who owns the same model. After unloking it, you can use universal remote.

Most RCA sets use a four digit code to control the v-chip. The code reset is different depending on the model. Try each number until you find the one that works for you.
  1. Hold down the MENU button on the remote and VOLUME DOWN button on the TV it's self at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  2. Hold down the 0 (zero) button on the remote and the VOLUME DOWN button on the TV itself at the same time for at least 4 seconds. The set won't say so, but the lock will be unlocked
  3. Hold down the MENU button on the front of the TV and the TV button on the remote at the same time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button on the front of the TV set and the MENU button on the remote at the same time for at least 4 seconds. Depending on the model, one of the methods should unlock the V-chip. Now, if desired, you can change the settings on the V-chip by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to MENU and then going to TV SETUP, then to V-CHIP SET
OK.

Jun 25, 2011 | RCA 20F512T 20" TV

2 Answers

I need the codes for an ASDA remote control, model no: URC20-D1F


URC20 D1F

Set up by Automatic Search

1. Turn TV on
2. Point the remote at tv and Hold SET and TV buttons at the same time and keep pressed for 3 seconds.
3. The LED flashes and the remote control starts the automatic search.
4.The OFF signal is automatically sent to the tv from the remote control.
5. Once the TV switches off press any button except SET to stop auto search.
6. Switch your tv on using the POWER button.

May 09, 2010 | Universal Remote Control Remote Control

Not finding what you are looking for?
Heating & Cooling Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

paulcarew

Level 3 Expert

2457 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Donni Steen

Level 3 Expert

659 Answers

Are you a Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...