Question about Casio Watches

3 Answers

How to set time Casio W-89H two button watch

Just need to know how to set the time! The watch only has two buttons: ''mode'' and ''12-24 hr''. Thanks!

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Actually, the watch has 3 buttons -- "Light" being the 3rd one. Press Mode until a number in the time mode begins flashing. Then press the Light button to get it to the hour indicator. Use the 12-24 Hr button to set it to the current hour. Then press the Light button again to get it to the minutes section. Again, use the 12-24 Hr. Button to set it to the next minute coming up in the current time. Then push the Light button again. This will bring up the seconds indicator. At the precise time the minute you set before begins, hit the 12-24 Hr. button, and the indicator goes back to zero and begins ticing away. Then hit the Mode button again until the watch is in the current time mode. Hope this helps. I use Internet time to set a precise time.

Posted on Sep 21, 2009

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 65 Answers

If you lost your watch "owner's manual" do the following:
-On the back cover there is a 4 digit number in a square frame.This the module(movement mechanism) number.
-Go to http://world.casio.com/wat/download/en/manual/ and put this number
where "Module No." is written.Click "Search"
-On the following page you'll see a pdf file with the module number
-Click on this number and you'll have the manual.
I hope that this will help.

Posted on May 12, 2012

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Need instructions to change battery W89h

Posted on Nov 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to set an alarm on my watch but I do not know how. I have a Baby G watch Casio Model BG169A-1AV


press mode until you reach the alarm mode then press and hold set button until the digit blinks. note: the one that blinks can be adjusted, the 24 hr/fwd is to add, the alarm on/ rev is to minus. if your done press set button to finish. i hope this will help you.

Jul 13, 2011 | Casio BG169A-1AV Wrist Watch

1 Answer

How to set time on my Casio Lw-200 Kids watch Its a digital watch


Thank you for contacting FixYA.<br /> <div style="BORDER-BOTTOM: medium none; TEXT-ALIGN: left; BORDER-LEFT: medium none; BACKGROUND-COLOR: transparent; COLOR: #000000; OVERFLOW: hidden; BORDER-TOP: medium none; BORDER-RIGHT: medium none; TEXT-DECORATION: none"> <li id="jsArticleStep1" itxtvisited="1"> Examine your watch. Attempt to find its "Mode" button; nearly every digital watch has one. The various modes might include "Date," "Alarm" and "Stopwatch" among others. Repeatedly press "Mode" to cycle through the modes available on your watch until you have it in the mode that displays the current time.<br /></li></div> <li id="jsArticleStep2" itxtvisited="1"> 2 Locate the button that allows you to adjust the settings on your watch; this button could be labeled "Set" or "Adjust." Once you've found this button, press it in and hold it. After a few moments, the time display should begin to flash.<br /></li> <li id="jsArticleStep3" itxtvisited="1"> 3 Select either minutes or hours as the aspect of the time you'd like to adjust. Press the "Mode" key to cycle through your options; each element should begin to flash as it's selected.<br /></li> <li id="jsArticleStep4" itxtvisited="1"> 4 Press a button to adjust the time element you've selected; the button for doing this will vary from watch to watch. If there are up and down arrows on your watch, use them to increase or decrease the number. A button labeled as another function could serve this purpose too; trying pressing the various buttons on your watch to discover the correct one to adjust the time.<br /></li> <li id="jsArticleStep5" itxtvisited="1"> 5 Move on to the next element you want to adjust, such as minutes or the date, by pressing the "Mode" display.<br /></li> <li id="jsArticleStep6" itxtvisited="1"> 6 Press the "Set" button to finalize the new time on your watch. You'll know that the time has been set when the numbers stop flashing.<br /></li> <br /> For more Casio info go to:<br /> http://www.casio.com/support/<br />Best regards.

Aug 24, 2010 | Casio LW200-1AV Wrist Watch

3 Answers

Cannot set the analog time on the Casio 2747.


In timekeeping mode press bottom left button 6x to enter setting mode.
Then hold down top left button until digital time flashes, which indicates your in analog time setting mode. press bottom right button to set the time.
If you hold down bottom right, it will set time at a faster speed.
Hope this helps

May 25, 2009 | Casio AW80-7AV Wrist Watch

1 Answer

Set time on Fossil DQ1138 Watch


Press and hold the SET button (it will read CHIME with a flashing on or off). Then push the MODE button - the top will be flashing 12-HR or 24-HR. Push the ST/SP button to toggle between the 12-HR to 24-HR reading. Push the MODE button to get to the hour/minute/second/year/mo-day/month/day value you want to change. Push the ST/SP button to increase the value, the RESET button to reduce the value.

Apr 01, 2009 | Fossil Digital Sport Hologram Display...

2 Answers

Have a casio watch with analogue and digital time.  can change analogue time but not digital time


Digital time must be set using pushbuttons on watch case sides. One of them is for MODE, another for SETTINGS.
Mode button usually must be held pushed in for a while to start to work and the digits should start to flash - only then you can start to reset your digital watch using another (settings) button.
Use small steal pin to push these buttons.
If nothing happens, you will have to consult your nearest watch repairer as in this case there is a mechanical or electronical fault.
Rating is very appreciated.

Jan 05, 2009 | Watches

1 Answer

Need to know how to set the time and date on a Columbia CL5008 wristwatch.


CLick mode until you get to time
Hold set button until chime is displayed
Clcik mode again until 12 hr is displayed mode agiain to hr St/sp to to incresse time Reset to Decrease
mode to cycle thru

set to finish

Aug 14, 2008 | Timex Sports Ironman Triathlon 100-Lap...

5 Answers

Acqua Indiglo water resistant watch with alarm 30m


Press and hold the MODE button (bottom left) for approximately 3 seconds.

When the Alarm set time starts flashing, press the MODE button once more. Now the seconds for the watch time should be flashing.

Use the START/STOP button (top right) to move bewteen items and the SPL/RESET button (bottom right) to change the item.

Moving between all items, it will take you through: seconds, minutes, hours, month, date, day of the week. Simply press MODE when your settings are complete.

Jul 25, 2008 | Watches

9 Answers

Setting time on casio illuminator watch


Here is how you do it:

Looking at your watch face: the upper left button is A, upper right is B, lower left is C and lower right is D.

Get your watch into "Hand Setting mode" That is the mode witht he digital time and seconds above it.
From Day and Date window it would mean pushing button "C" six times to get to that mode.

Once in "Hand Setting Mode"
Hold down button "A" til time blinks, then press button "D" to advance the hands, to the desired time.

Press "A" to exit mode.

Press "C" to return to timekeeping mode.

Dec 03, 2007 | Casio G-Shock GW300CA-1V Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

4,738 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Kazim ERGUNEY
Kazim ERGUNEY

Level 3 Expert

577 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Are you a Casio Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...