Dryers Logo

Related Topics:

phil senior
phil senior Posted on Jun 19, 2016
Be the first to answer

Our NEFF r4381x1gb/4 will not run a full cycle,

The cycle starts, runs for about a minute then the counter timer jumps to end 0mins, the drum is heating up and I believe it's turning also, This happens on every cycle we have tried, It also has a little full stop in the timer display

Answer This Question
  • phil senior Jun 19, 2016

    Thank you for your reply, would this part be known as (timer)? I have searched for this and don't seem to be able to find it.

  • ray gallant Jun 19, 2016

    it could be a power control board too .

×

5 Related Answers

Anonymous

  • 7 Answers
  • Posted on Feb 09, 2008

SOURCE: Drum runs, but no heat

i would first look at the heating element. check for continuity.

Ad

Anonymous

  • 2 Answers
  • Posted on Feb 29, 2008

SOURCE: NEFF S5456 DISHWASHER

Have you tried it on a different program? I have nearly always used the AUTO program - however i have used the 50 degree program 3 times now and it completes the (much longer) wash without sticking on one minute. Will try it on auto again to see what happens. I found it useful to turn the end-of-wash buzzer on (to loud) to remind me when (if) it completes the program.

Anonymous

  • 27 Answers
  • Posted on Mar 19, 2009

SOURCE: Bsoch dishwasher runs long and displays 1 minute left on timer

sounds like a bad solder connection on the heater relay of your control unit. more than likely you will need a new control unit. part number 266746

Anonymous

  • 1 Answer
  • Posted on May 25, 2010

SOURCE: Bosch dishwasher timer sticking

I have been told to replace the timer which I am looking to do the same to my machine!

Sam

  • 3247 Answers
  • Posted on Jun 05, 2010

SOURCE: our Neff S5454x1/21 dishwasher has occasionally stopped/stuck

Looks like the heater unit has packed up.

I cannot seem to find the actual model you have anywhere on the internet. But I am assuming you connect the dishwasher to cold water inlet and it is meant to have a heater.

Are you in UK or Europe. Bosch also makes parts for the NEFF dishwasher but I am not able to find spare parts for your exact model.

Please post a comment.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

John Lewis JLWD1612 not running the entire cycle
It sounds like it needs a reset, or the control board is faulty. There is nothing in the manual about a reset, but try this. Remove the wall plug for 15 minutes. Press and Hold the ON button and reconnect to mains power. Continue to hold the button for 5 seconds.

https://www.manualslib.com/manual/1208091/John-Lewis-Jlwd-1612.html?page=40

*than and *then. You chose the wrong one. Easy way to remember
then = a moment in time
than = a comparison between one thing and another

Professor of English
Read full answer
Feb 13, 2022 • Washing Machines
0helpful
2answers

300next machine fills with water when I start the cycle, timer jumps from 60 to 57 minutes. Then it just counts down like normal but does nothing, at the end the door unlocks the drum still full.
Check belt, but a lot of different possibilities on this problem. Best to call service.
Read full answer
Oct 22, 2018 • Washing Machines
0helpful
1answer

Dryer starts cycle, but only runs 3 or 4 minutes and ends cycle.
Does your timer cycle, if not I would start there.
Read full answer
Jan 22, 2015 • Samsung DV365ETBGWR 27" Front-Load...
0helpful
1answer

My 15 yr old Bosch d/w starts at 13 min & runs to 1, doesn't gets to CL. No water in or drain out.
IF IT ENDS UP WITH WATER SHOWING AT THE END OF EVERY WASH THEN THE DRAIN PUMP IS JAMMED OR FAILED THE DISHWASHER PROG WILL JUST KEEP LOOPING BACK TRYING TO DRAIN THE WATER.
Read full answer
Mar 04, 2017 • Bosch Dishwashers
0helpful
1answer

Set clock and be able to tell am from pm setting
The Clock uses a 12-hour cycle with a.m. and p.m.
1. Check that the oven is off.
2. Press CLOCK.
3. Press TEMP/TIME "+" or "-" arrow pads to set the time of day, including a.m. or p.m.
4. Press CLOCK or START
The Timer can be set in hours or minutes up to 12 hours and 59 minutes.

1. Press TIMER.
2. Press TEMP/TIME "+" or "-" arrow pads to set the length of time.
3. Press START to begin the countdown. If enabled, end-of-cycle tones will sound at end of countdown.
4. Press TIMER twice to cancel the Timer. Do not press the CANCEL/OFF keypad because the oven will turn off.
5. If the TIMER is running, but not in the display, press TIMER to display the countdown for 5 seconds

Delay Start:
The Start Time keypad is used to enter the starting time for an oven function with a delayed start.

Hope this answers all you questions about your stove.

Jaye
Read full answer
Nov 04, 2013 • Whirlpool RF263LXTQ Range
5helpful
1answer

I have a Neff R4381X1GB/01 Tumble Dryer which will not start. All panel lights come on as normal and the countdown timer runs down.
get answer to your solution at ehow.com
Read full answer
Jan 09, 2013 • Neff R4381 Electric Dryer
0helpful
1answer

I have a LG Tromm dryer that will only run a full cycle on a time dry setting. Any other setting the timer runs for about 3 minutes that the timer jump from lets say 60 minutes to 5 minute and then cools...
you need to check the moisture sensor bars and the wiring to them
Read full answer
Jan 08, 2011 • LG Dryers
0helpful
1answer

Dryer drum will not run. When I turn the timer dial and hit start, the timer will run until the cycle completes but the drum nver turns.
Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101
Read full answer
Nov 04, 2010 • Kenmore 64942 Electric Dryer
0helpful
1answer

Matsui mf160 starts its wash cycle and timer stops
on most machines, the timer will not run if the water is not up to temp. if the inside is plenty hot mid-cycle, then your heating element is probably good. it is the thermometer that needs located and checked. if the inside is not steamy, then your heating element is the most likely culprit.
don't hate your dishwasher. it just wants to make sure that you get a full wash cycle at a hot enough temp. to get the dishes clean. good luck
Read full answer
Jul 06, 2009 • Neff 24 in. S5543X2 Built-in Dishwasher
1helpful
3answers

NEFF S5456 DISHWASHER
Have you tried it on a different program? I have nearly always used the AUTO program - however i have used the 50 degree program 3 times now and it completes the (much longer) wash without sticking on one minute. Will try it on auto again to see what happens. I found it useful to turn the end-of-wash buzzer on (to loud) to remind me when (if) it completes the program.
Read full answer
Sep 30, 2007 • Neff 24 in. S5456 Built-in Dishwasher
Not finding what you are looking for?

View Most Popular

Dryers

Related Question

John Lewis JLWD1612 not running the entire cycle

  • Washing Machines

141 views

Ask a Question

Usually answered in minutes!

Popular Questions

My tumble dryer keeps stopping after approx 2 mins The container light comes on.

Neff Dryers

Neff r8580x0gb tumble dryer, key symbol flashing and beeps when start button pressed then wont start

Neff Dryers

How do you remove the front panel of the neff R4381X1GB dryer?

Neff R4381 Electric Commercial Dryer

I have a Neff R4381X1GB/01 Tumble Dryer which will not start. All panel lights come on as normal and the countdown timer runs down.

Neff R4381 Electric Dryer

How to reset the timer back to default

Neff R4381 Electric Commercial Dryer

Top Neff Dryers Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Neff Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...