Hi we have an electrolux ESL6370RO dishwasher. The anti-flood has activated. Its an integrated unit more details above
SOURCE: Overfill protection tripping
Seems like the machine fills too much water. Try to reduce your water pressure a bit, and try it again. But just a bit!
SOURCE: Fisher-Paykel DD603 DishDrawer shows F1
Fisher-Paykel DD603 DishDrawer shows F1 fault code. The Flood Switch has been activated. I need instructions on how to re-set the flood switch. I have two drawers that are possitioned one above the other and the are both giving the error of the activated flood switch. Any advice or instruction is greatly appreciated.
SOURCE: The flood switch has been activated on my dishwasher
Remove the bottom drawer by pressing in the tabs on either side of the drawer (bottom edge towards the front).
Dry out the compartment with towels and let air dry.
SOURCE: Electrlux dishwasher - ESL 63010 - anti-flood
Got this tip from another board. Unplug and disconnect machine. Take machine out and tip 45 degrees to empty water in base of unit. Put everything back together. Thats it. Worked for me.
83 views
Usually answered in minutes!
×