Question about Logitech QuickCam Express Web Camera

1 Answer

Cam want load

Part way through loading my cam,i get this message.
the file ksuser.dll on (unknown) is needed type the path where file is located and then click ok.
where do i find it.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers
Re: cam want load

Normal 0 Did you install the software with the camera connected to the computer? Disconnect the camera from the USB port and reinstall the software. When the program asks you to connect the camera, do so, and it should work. Hope this is of some help. Bud

Below is info for setting up Audio & Video to chat on line after you install , either Skype or a messenger program.

Web Camera’s have to be setup on the program they are to be used with. Just installing the camera on your computer does not set it up to broadcast on messengers or Skype.

Each program has Options that have to be setup in order for the Audio and Video to function properly.

A. Skype Setup:

After downloading and installing Skype set it up as follows:

  1. Go to TOOLS, then OPTIONS, and click on Audio Settings and set the Microphone and Speakers to the computer Audio Card.
  2. Then click on the Video Settings.
  3. The camera if installed properly will come up and show a picture.
  4. Then on the bottom of the page click on Save.

The camera and audio should function properly. Your friends and Family will now see and talk to you.

B. Yahoo Setup:

After downloading and installing Yahoo Messenger set it up as follows:

  1. Go to Messenger at the top left and click on it.
  2. Next go down to Preferences and click on it.
  3. Next Calling and Devices on the right and set the Microphone and Speakers to the computer Audio Card.
  4. Next go to the Test Audio section and (in blue writing) click on “Open the call setup assistant” and follow the instructions on the left window.

C. Windows Live Messenger:

  1. After you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X.
  2. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”.
  3. Next go to the Menu Bar on right side, click on “ “Action.”
  4. Go to “TOOLS” and click “Audio and Video Setting” and follow the instructions.
NOTE: You audio and video shoud work. Enjoy.

When done both the Audio and Video will function properly so you can chat and see family or friends you are connected to.
Hope this helps. Bud

Posted on Jan 14, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

Error 2738 pls give me answer

The error indicates that the VBScript DLL is not properly registered on the os. You should be able to fix it running the command on the command promp
regsvr32 vbscript.dll

before that try to search the location of the file on the windows, run the command with the path of the location of the file

May 13, 2010 | Logitech QuickCam Communicate STX Webcam

2 Answers

When trying to load my logitech cam it says tsbyuv.dll is missing.. how do i get it? and what is it?

try reinstalling the drivers, if that does not work then reinstall camera software.

Oct 23, 2009 | Logitech QuickCam Home Webcam

3 Answers

Cant load new cam saying i need usbvideo file,looked on google but so many and not much help either

go to logitech web site and look for full driver program for your model of webcam. it and install. ...that should put in every file you will need to run your cam....if you installed the drivers from a disk that came with your cam. then uninstall those drivers first then reinstall drivers from logitech site. might have just gotten a bsd install and need to reinstall drivers again. ...but not from the disk. from logitech site

Aug 31, 2009 | Logitech Webcam

2 Answers

CtcamMgr.dll driver file - the driver from cretaive try to install this one

If helped rate fixya

May 03, 2009 | Creative Labs Creative Webcam

1 Answer

Ge easy cam

Here's the GE Easycam driver software:

Download it to your desktop. Unzip it to a folder. Plug the webcam in.
The operating will detect it but not be able to install drivers for it.
Now go to Control Panel > System > Device Manager.
There will be an 'Unknown Device' with a yellow exclamation mark. This device is the webcam. Double click on it, and click the Driver tab. Now click Install Driver, and then the 'Browse Computer for Driver' type option, and navigate to the folder you unzipped it to, select it, install and reboot.

Here is the user manual too:

Hope this helps

Chris (ziraffa)

Jan 09, 2009 | GE EasyCam Webcam

1 Answer

Cam wont turn on Redownload drivers here. your driver file is corrupted.uninstall old drivers and unplug cam.reboot then download new and reboot.plug camera back in and install drivers.RICHARDM69

Dec 12, 2008 | Ezonics EZCam Plus Webcam

1 Answer

IBM PC Camera driver for Windows XP

You need to get the driver for that camera for XP. Try this link and if not OK, google for another link:

Oct 25, 2008 | IBM Webcam

1 Answer

Web cam and missing tsbyuv.dll file

you can get it here

should be correct.

This is a driver file from a Toshiba video driver

Oct 10, 2008 | Webcams

8 Answers

Problem while installing Logitech webcam software in Vista Home Premium

If you are using windows xp then you should download this fix from the microsoft website.

If you are running windows vista please follow these instructions carefully.

  1. Click on "Start".
  2. Click on "All Programs".
  3. Click on "Accessories".
  4. Right click on the Command Prompt, select "run as administrator".
  5. At the prompt, type "regsvr32 vbscript.dll".
  6. You will now get a message box saying "vbscript.dll" has been registered.
  7. Reinstall QuickCam
I hope this helps. If not let us know.

Please rate my answer

Jan 07, 2008 | Logitech Webcam

4 Answers

Will not startup with windows vista

My Veo Stingray works with Vista Ultimate just fine.

How I did mine:

Search for and find on the net (like I did once upon a time) a file named:


Install it- Mine wouldnt finish install (95%) because of ".DLL load failer"

Once rebooted- when the system tried to install driver auto. I just browsed to the "c:\program files\veo stingray\drivers folder (created) and it installed and works now.

Hope this helps.

Aug 20, 2007 | Veo Stingray

Not finding what you are looking for?
Logitech QuickCam Express Web Camera Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Webcams Experts


Level 2 Expert

180 Answers

WTF Chuck.....
WTF Chuck.....

Level 3 Expert

378 Answers

Pieter Vleeshouwers

Level 3 Expert

1315 Answers

Are you a Logitech Webcam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides