Question about Washing Machines

1 Answer

Novotronic 7644C - The dryer is not completely drying and the clean out airways light keeps coming on. I have rinsed the filter and cleared all the lint screens. Also there is water leaking out of the bottom. Help!

Posted by on

  • yadayada
    yadayada May 11, 2010

    the vent tube, is it clean to the outside?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 8,220 Answers

Have you dumped the water ? I think this dryer is a condenser dryer ain't it? Non vented type dryer? If so there is a water jacket that has to be dumped ever so often.

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW CAN I EXTEND THE DRYING TIME? MAXIMUM DRYING TIME I HAVE MANAGED TO GET IS AN HOUR AND A HALF AND IT IS NOT ENOUGH TIME TO DRY MY TOWELS. ALSO HOW DO I CHECK AIRWAYS? THE RED INDICATOR LIGHT HAS...


on your heat setting you should see less dry, normal dry and more dry. put the setting on more dry and that should take care of the problem. and for the airways. first check your lent trap and if that doesn't do it, check your exhaust hose from dryer to the outside and if that is clear you may have to remove rear cover and clean out. i hope this help.

rwpfn@aol.com

Sep 02, 2010 | Dryers

1 Answer

My vaccume has little suction


Hello :

1: Check that the Dyson's brushbar knob is turned to the "Carpets" setting for vacuuming non-delicate and raised pile carpet. Vacuuming carpet on the "Bare floor" setting usually leaves a telltale single wheel mark on the pile, and pickup is severely limited.


2:Locate the removable filter on the side of the vacuum. It will be marked with a raised circular representation.

3:Press down on the release button with your thumb as you lift filter housing up and out

4:Examine the filter for debris. Wash the blue foam and yellow framed filter in cold water. (See Tips section.) Let dry for 12 hours. Do not wash the outer filter housing that snaps into the vacuum; simply wipe clean with a dry or slightly damp cloth. Replace the filter when completely dry.

5:Locate the airway inspection valve on the opposite side of the vacuum. Press the release button as you lift the valve up and away from the machine.

6:Remove any debris or clogs you find inside.

7:Use a soft cloth to clean up lighter debris and completely clear the airway valve.

8:Tip the Dyson vacuum over to find the U-bend at the back of the unit. Press the release button as you pull the U-bend down and away from the machine.

9:Inspect the U-bend and remove debris. Be sure to line up the release button as you snap the U-bend back into place.

10:Check all removable pieces to be sure they are attached properly and snapped correctly into place. The soleplate should be flush with the cleanerhead.

What you need for this :

  • Large slotted screwdriver
  • Scissors
  • Washcloth
  • Soft cleaning cloths
  • Household surface cleaner, safe for plastics
  • Crochet hook or similar long-handled tool

Warning :

Unplug the vacuum before doing any troubleshooting. Follow all manufacturer's instructions and warnings. The yellow encased filter and blue foam filter pad can be submerged and rinsed in cold water only. Do not use detergent. Do not wash or dry in dish or laundry machines. Do not dry in the oven or microwave.

PLEASE RATE !

Apr 23, 2010 | Bissell 3576 CleanView II Bagless Upright...

2 Answers

I recently had an ventless Bosch dryer installed (WTE8600US) and I keep receiving this message F:03 which the manual says "check hose for condensation outlet". any advice?


For the F:03 problem on the Bosch Axxis (WTE86300US) do all the things mentioned in Solution #1 above. Sometimes the lint in the condensation filter channels (those that run from front to back)can be quite stuck. Use a pipe cleaner to get in there or a garden hose with a spray nozzle. However there is one more crucial step not mentioned in the manual or in Solution #1. Once you remove the condensation filter you will see a small plastic panel on the lower wall of the condensation filter slot. Slide a flat blade screwdriver and gently pop it open. Under the panel is a small chamber where you will find a slurry of lint/water which is what clogs the condensation outlet. With latex gloves reach in there and clean it out. Blow hard into the dryer through the condensation hose to clear up any last bits. Pop the panel back in place. This should fix your problem.

Dec 13, 2009 | Bosch Dryers

1 Answer

The machine keeps saying clean out airways yet there is no fluffy stuff on the filters i have hoovered them out as well


Remove all 3 filters, half moon filters below door, filter in door and heat exchanger from front of appliance and rinse under warm water dry and refit.

Nov 17, 2009 | Miele Novotronic T230C Electric Dryer

1 Answer

Dryer not drying clothes


An easy way to check dryer function is to check the airflow on the outside of your home at the exhaust the vent. While the dryer is running, and hot, put your hand near the outlet. The air coming out should be hot and forceful. If not, there is most likely an obstruction, and the whole airway should be cleaned. Keeping the airway clean and clear can dry clothes faster and save you money.

Another possibility is the blower,(fan) which can become encrusted with lint, preventing it from moving air. This is much less likely, but still a possibility.

Dec 09, 2008 | Whirlpool Estate TAWS750PQ 27-Inch Washer

2 Answers

Miele Novotronic G842SC Plus


Add the requested rinse aid.. The light is on telling you it's low/empty.

Oct 20, 2008 | Miele 23 in. Novotronic G841 Built-In...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1461 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Brad Brown

Level 3 Expert

15618 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...