Question about Maytag Washing Machines

1 Answer

Topload maytag washer partially fills by its self overnight or even a day or two may pass.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 525 Answers

Warning! To avoid personal injury or even death, always disconnect your appliance from its power source--that is, unplug it or break the connection at the circuit breaker or fuse box--before you do any troubleshooting or repair work on your appliance. Also, because some components may have sharp edges, use caution while working on your appliance.
Your washer has a defective water inlet valve.
The link below is courtesy of. www.repairclinic.com,
They also provide repair parts, disassembly diagams and procedures.
http://www.repairclinic.com/SSPartDetail.aspx?s=b4a11i868761&PartID=868761
This may not be the exact part for your washer.
You will need the complete model number from the product ID tag which is affixed to your washer, to obtain the correct part.


TIP:
If it is convenient, it is advisable to turn your washer faucets off when not in use, to prevent accidental flooding

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer fills overnight (GHW9400PW4)


a bad water inlet valve try unplugging machine and see if it still does it? if it doesnt do it when unplugged then u have an electrical signal problem from eiither control board or timer if it keeps doing it when unplugged its ur water inlet valve

Jul 12, 2014 | Whirlpool Duet GHW9150P Front Load Washer

2 Answers

I have a Maytag Topload Washer Moderl PAVT2448WW


it may need to replace the MAIN DRIVE BELT , before assuming it could be the motor, HOPE THIS HELPS , AJ

May 18, 2009 | Maytag PAV2300 Top Load Washer

1 Answer

Maytag washer


Many of the maytag toploaders have a rubber fill hose at the top of the outer drum.
Sometimes if the machine is fully loaded (or overloaded), during the spin cycle if clothes are above the top of the drum they can actually knock the rubber flange of the hose out of the drum. Then when the machine fills with water, it will dump it down the outside of the tub and it will appear that the water is leaking from the top and side of the drum... Fix it by snapping the fill hose flange back into the hole in the top part of the drum... let me know how you do or need more help...

Mar 23, 2009 | Maytag Ensignia 3.3 cu. ft. Top Load...

1 Answer

Washer will not spin


Sounds like it could either be an electrical problem, with the signal from the timer control board getting to the gear box,,, or it could be the gearbox itself.

Mar 12, 2009 | Maytag 22 Cycles Topload washer, SAV365Z

1 Answer

GE topload washer occasional screeching noise during wash cycle


It sounds like it could be a brake pad that has broken and is partially rubbing against the brake frame.

Mar 07, 2009 | GE WJRR4170E Top Load Washer

2 Answers

Soap residue


if you just have a soapy residue( bubles atop the clthing?? either your using way to much soap, or way to much of wrong soap.you need to use HE detergent specifically formulated for front loading amchins(low sudsing. or your having a cold water inlet problem set te hunit to cold/cold/ try running see if inded the machine fills

Mar 01, 2009 | Maytag Neptune MAH5500B Front Load Washer

1 Answer

Model mav6000awu has a sound of water rushing when machine finished filling and running.started doing this recently.


most maytag toploader mav did have that sound if it drain & spin your ok i have the same washer and it has the same sound & work fine that washer will only last about 10 years (i work for maytag )

Feb 18, 2009 | Maytag Washing Machines

1 Answer

Washer won't fill


First take off the fill hoses from the washer, make sure the screens on the washer valve are not clogged. Next heck nd make sure you have water coming from the hoses. Finally if still no water. you may ned a new fill valve. Hope this helps , Dave www.washermd.com

Dec 22, 2008 | Maytag HAV3460AWW Top Load Washer

1 Answer

No hot water for a Maytag topload washer


Turn the water off and disconnect the hot wat hose from the spigot and the machine. There should be a screen filter in one end. Check to see if the screen is clogged. If it is then replace it. If not then replace the water valve

Jan 10, 2008 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...