Question about HP Officejet Pro L7580 All-In-One InkJet Printer

1 Answer

I have replaced all four cartridges, cleaned and aligned printheads and done a test sheet all of which indicate normal operation. When I print or copy the results are basically unreadable.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You have not mentioned the name of ur printer well! as i can see that you have already performed all the steps so you must go ahead and try to insert the new set odf cartridges if that is also not going to work then your printers hardware functionality of ur printer has gone bad so you must service ur product .................

Posted on Sep 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix my printer it prints blank sheets it acts like its printing but the paper is still blank I did nozzle and print head checks nothing still blank


I hate to state the obvious, but how long has it been since you've changed the ink cartridges on the printer. If you have done both the nozzle cleaning and print head alignment and nothing appeared on the paper, I don't know what else it could be.
This following suggestion is very rare - if you recently replaced the cartridges and your printer hasn't printed since then, it is possible that you installed them incorrectly; OR perhaps you left the head protector tape on the cartridge. But then it wouldn't "see" the cartridge.
In the "rare" situations, you should try to remove and replace the cartridges to assure that they are properly installed.

Mar 05, 2015 | Epson Stylus CX6600 All-In-One InkJet...

1 Answer

Printer loads paper and goes through the same process it used to when printing but it spits out a blank sheet of paper. It got a new back ink cartridge in it.


Try Cleaning the Cartridges manually and automatically.
For the cartridge clean it with a damp lint free cloth and also for the printheads wher eyour gonna be inserting the cartridges.
Follow these steps do do the automatic aligning and cleaning:
Click Start and then go to Printers and Faxes (XP), Printers(Vista), Devices and Printers(Win 7)
1. Right Click on your printer Icon 2. Go to Printing Preferences 3. Click the Features Tab 4. At the bottom of the window you will see Printer Services or Device Services. Click on it. 5. Choose Align Printheads on the list.

For Cleaning the Printheads, Instead of choosing Align Printer choose Clean Printheads.
I hope this helped.
Try Printing Again. I hope I was able to solve your problem. :)

Feb 08, 2011 | HP Officejet 6500 Wireless All-in-One...

1 Answer

Replaced print head and cartridges and still not printing.


Open the kodak all in one home center on your desktop and click on [?] on top most right hand side. choose maintenance under general links and choose printhead cleaning. if this does not solve the issue, call kodak @ 1800 421 6699 and they will replace the printhead for you free of cost..

Jul 04, 2009 | Kodak ESP 5 Printer

1 Answer

Kodak ESP-5 AiO says "0%" ink even after I install new cartridges


Hi,
Let's clean and align.

Make sure that there are 5 - 10 sheets of plain paper loaded in the paper tray.

2 Press menu to display the main menu.

3 Press down arrow until Maintenance is selected.

4 As needed, press down arrow until the desired option is selected.

5 Press OK.

6 Follow the prompts in the display screen to initiate or cancel the task.

These available maintenance options are shown below:

Check Ink Levels
Nozzle Check
Printhead Alignment
Clean Printhead
Print Demo Sheet
Print Test Page

From windows, : Open the Home Center Help panel by clicking Help on the Home Center window, as needed. Click Maintenance, and then click
Nozzle Check or Printhead Alignment.


Macintosh: Open the Home Center window and click Maintenance, and then click Nozzle Correction or Printhead Alignment.

Should be good now.

Regards
Richard.

Apr 24, 2009 | Kodak ESP 5 Printer

1 Answer

Cannot print with new ink cartridge


Sounds like a non genuine, aftermarket ink that is dodgy.

if not ensure it is indicating the same colour that you replaced

Dec 12, 2008 | HP Photosmart C6280 Printer

1 Answer

After replacing the ink cartridges ran out I replaced them for new ones and the machine is not telling me that cartridges are empty tried and tried to rereplace them and I still keep getting the same


  1. Press the Menu/Set key.
  2. Press the up or down navigation key until TEST PRINT appears on the LCD.
  3. Press Fax Start. The DCP/MFC begins printing the Print Quality Test Sheet.
  4. By reviewing this Test Sheet, you can determine if the print quality or alignment needs improvement or adjustment.
StepA - Checking the print quality:
  1. The display will read "IS STEP "A" OK?" 1.YES 2. NO.
    Before choosing YES or NO, closely examine the print quality of the four color blocks that are formed by short diagonal lines on the Test Sheet.
    If all lines are clear and visible, press 1 (YES) and proceed to StepB. If you can see missing short lines, press 2 (NO).

  2. The display will then ask you if the print quality is OK for each color. Press 2(NO) for any color with the problem.

  3. The display will then show START CLEANING? 1.YES 2. NO.
    Press 1(YES) and the DCP/MFC will start cleaning the color ink cartridges.

  4. After the cleaning is finished, press Fax Start. The DCP/MFC will print another Print Quality Test Sheet.

  5. If you can see missing short lines in any of the four color blocks press 2 (NO) and repea the quality check and cleaning process. Repeat this procedure at least 5 times if print quality remains a problem. If short lines are still missing after the fifth cleaning and test print, replace the necessary ink cartridges. If the print quality of the 4 color blocks is OK, press 1 (YES).
StepB - Setting the Alignment:
  1. The display will then read "IS STEP "B" OK?".

  2. Examine the 600 DPI and 1200 DPI test prints on the Print Quality Test Sheet. If the number 5 sample of both the 600 DPI and 1200 DPI most closely matches the 0 sample, press 1(YES).
    If one of the other samples is a better match for the 0 sample, press 2 (NO). The display will then prompt you to select the sample that most closely matches the 0 sample for 600 DPI and then 1200 DPI.

  3. Print another Print Quality Test Sheet by following the steps provided at the top of this page and check it.

  4. Press Stop/Exit.

Aug 11, 2008 | Brother MFC 420CN All-In-One InkJet...

3 Answers

When printing on my HP officejet pro L7680 the printed sheets has lines across it and the text is missing from the lined area


The HP88 printhead can dry out and cause clogging in the black part of the K/Y (black/yellow) printhead.

This has been a major problem for a few client schools of mine and for me in my attic space where air conditioning and/or hot dry air causes clogging.

You may want to consider purchasing a new printhead and an alternative black ink supplier (non HP) that uses Dyebase ink instead of pigment as this doesn't clog in the same conditions.

However, please note that if you do this it means you may lose your warranty (certainly on the printhead) and the printout won't be as clear for text as the black ink can "bleed" slightly into other colours. It has however solve the problem of clogging in one school that went through 5 printheads in two terms/semesters until we switched.

Aug 02, 2008 | HP OfficeJet Pro K5400dn Photo Printer

1 Answer

Canon pixma mp780


Try uninstalling/reinstalling the drivers.

Is the error light flashing?

From the printer utility can you print a nozzle check sheet or align the printhead?

Does it seem to be printing (feeding sheet and moving printhead) or nothing happening at all?

Try removing all the tanks, take out the head. If blocked try cleaning manualy by running warm water over the ink ports/printhead jets - dry off and reinstall.

May 10, 2008 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

Lost B&W printing


Hi marc, it sounds like the normal clean has not eliminated the clog you may have in back printhead. I need to know if you refil your own cartridges or not to be specific, but basically you need to remove the black ink cartridge, and clean the printers heads yourself, and right down where cartridge sits wth cotton buds and proper cleaning solution. Wipe the surface of cartridge if it has the printhead attatched (some printers have the printhead on them, some have it on the cartridge. Replace ink, reset black ink level, cancel the alignment for now, go straight to printing. Print a test page and see how it goes.

Jan 26, 2007 | Canon BubbleJet i560 InkJet Printer

Not finding what you are looking for?
HP Officejet Pro L7580 All-In-One InkJet Printer Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...