Question about Panasonic PT-51HX41 51" Rear Projection Television

1 Answer

Green and red color problem on bottom left to a little past the middle of the bottom of screen

I just turned my tv on and it has a red and green shadow on the bottom of the screen it goes from the left bottom to just past the middle of the bottom of the screen. It is also in a rounded shape it also has some red and green shadows on the top as well. Do you have any suggestion of what it is.
Thank you,

Posted by on

1 Answer

Re: Green and red color problem on bottom left to a...

The convergence ic's are breaking down and require replacement should cost under $ 250 depending on your service shop.

Posted on Dec 01, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

The color was off on the tv i took the bottom back off and there was a box with three screws on top and three screws on bottom that adjusted the colors when i turned the top left screw a little the three...

turn the center dial ( for green) down slightly then turn the other two the red and the blue up slightly to get the best screen without a dominate color screen.

Sep 02, 2011 | Philips 50P8341 50" Rear Projection...

2 Answers

Projection HDTV Pansonic 47" Curving blue and green colors on top and bottom of screen.

You will need to replace your two convergence I.C.s.They are two large IC mounted on a large aluminum heat sink.Replace both,look for any burned resistors near them,replace those if needed,and readjust your convergence. Good Luck

Let me know if you need any further help

Mar 29, 2008 | Panasonic PT-47WX42 47" Rear Projection...

1 Answer

RCA DLP TV with a red dot in the middle of the screen

Sounds like the color wheel stopped and re-started. It may continue to function for a while, but could fail at any time.

I've also seen on rare occasion, a defect in a lamp produce uneven color rendition, but its far more likely that the culprit is the color wheel.


Feb 13, 2009 | RCA D52W19 52" Rear Projection Television

1 Answer


take the front panel off the tv, the bottom, you will see 6 little nobbs :::, use them to adjust your picture, the left 2 should be for red, the middle 2 dlue, and right green, top 3 are for focas, those are probabily the ones you want to adjust, bottom 3 are for turning the colors up and down, mess with those untill pic looks good

Jan 07, 2009 | Toshiba 57H81 57" Rear Projection...

1 Answer

Green on screen

try to do it inside the board.
there are some adjustments except brightness and focusing..
try if you can ...


Aug 10, 2008 | Mitsubishi WS-65511 65" Rear Projection...

1 Answer

Red Blue and Green colors are not aligned and looks concave

replace fuse looks like cap next to flyback transfomer FL231 it will be the one in the middle.there are 3 of them next to FBT.

May 28, 2008 | RCA D52W19 52" Rear Projection Television

3 Answers

Picture then fades to blue.

Please post me on this as well. My Sony just turned 4 yrs this Jan and just last week it started having the same problem. -Thanks!

Mar 02, 2007 | Sony KP-65WS500 65" Rear Projection...

2 Answers

Warped Picture, Separated colors

Each color (red,green & blue) has an amplifier IC (STK-).
When there is a convergence issue,the first step is change both
IC's for reliability. Then check for open fuses devices,usually
pico fuses.Then re-check convergence alignment.......T.

Feb 07, 2007 | Philips 60PP9352 60" Rear Projection...

Not finding what you are looking for?
Panasonic PT-51HX41 51" Rear Projection Television Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

Josh Whitehead
Josh Whitehead

Level 3 Expert

1142 Answers

The Knight
The Knight

Level 3 Expert

66518 Answers

Are you a Panasonic Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides