Question about HP f1905 19" Flat Panel LCD Monitor

1 Answer

I loaded some software for a friend... on a new HP... she has an HDMI video card... i had to remove the card to get the standard video to work... now when i plugged the card back in... it will not bring up her HDMI video card... there is no signal input from it... what do i do?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Teacher:

    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 80 Answers

Is it possible you uninstalled the driver for the HDMI video card in other to get the new video card to work? if so you will need to remove the HDMI video card and replace the standard card, start up the computer and reinstaill the driver for the HDMI card.

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix a hp pro book 4520s hdmi plug


What is the problme with the HDMI plug? Do you need to remove it and install a new one?
I'm not sure if this plug is part of a PCI card or it's incorporaterd to the main board.
If it's part of the board, leave it alone, buy a video card and enable card from BOS. Messing with your MB might be more expensive.

If it is part of a removable video card, better. Remove and take the card to a repair service and probably they can replace the HDMI plug.



.

Jul 27, 2012 | HP Computers & Internet

1 Answer

Samsung 2007 27" TX-T3092WH will not support HDMI or cannot see PS3?


HI,
Do one thing While PS3 is in standby mode press and hold the power button on the frond panel of PS3 for 30 seconds (factory reset). After doing this you will get video from its composite video.

Also check the hdmi If you didnt get the video through HDMI then,
PS3 out puts Full HD 1080P video through its HDMI out put. IF your tv doesn't support Full HD then it will display format not supported or Software not support.
If you want to get video through HDMI then do the following.
Connect the PS3 to any Full HD tv (friends or relatives) and go to its menu ,select HDMI settings. then down scale the video from 1080p to 1080i.
After that connect the PS3 to your tv you will surely get the video.
Ajin

Jun 16, 2012 | Samsung TX-T3092WH TV

2 Answers

I have a HP m7570n. How do I use a flat screen tv as a monitor


This depends on the TV's available inputs. The Pavilion m7570n has only a VGA output in the standard configuration.

Thus if the TV has a VGA port, turn off the computer and the TV. Then connect a standard VGA (RGB or D-sub 15-pin) m/m cable between the computer and the TV. To use the TV speakers, connect a 3.5 mm audio patch cable between the computers Line-out (green speaker port) to the VGA audio in. Turn on the TV and set the input to VGA (with the Source or Input button on the remote or the TV). Then turn on the computer. Windows XP should find the correct resolution to work with the TV. (If you turn on the TV after turning on the computer, you may get an unsupported signal. Press Ctrl-Alt-Del twice to restart the computer.) If it doesn't work, you may need to connect a different monitor and set the computer to a low resolution before connecting the TV and the computer.

If the TV only has composite or component video inputs, you will need a VGA to video converter (http://www.svideo.com/pctocomponent.html for example). A VGA to component cable will not work; those are for projectors that read an RGB input. TVs interpret YPbPr.

If you have added a video graphics card, you may have an HDMI and/or DVI port(s) on the card. In that case, check the specs of the TV. Some TVs will support HDMI or DVI-HDMI inputs from a computer. Others will not (since computer video signals are not the same as the signal from a set-top box). If you use a DVI-HDMI connector, make sure to use the HDMI port labeled for DVI and connect the audio cable as with the VGA connection. If you use an HDMI connection, you may need to set the sound properties to that of the HDMI port. (Find the control panel item for sound (under Hardware) and then select Manage Audio Devices. Set the Playback properties. If it doesn't work, use an audio patch cable.) Some TVs have RCA audio inputs for the HDMI-DVI connector. In that case, you will need a female 3.5 mm to RCA M/M adapter (if you use a 3.5 mm patch cable). There is a similar device if you want to use an RCA audio cable. You may need to enable the video ports on the graphics card before swapping monitors.

Some video cards have a TV out. In that case, connect the appropriate connector (should come with the video card). Then connect to the component, composite or S-video input on the TV.

Again turn off the TV and the computer before making any connections.

You will probably need to provide your own cables for must of these connection options.

I hope this helps.

Cindy Wells

May 12, 2011 | HP Pavilion m7570n (EX331AA) PC Desktop

1 Answer

We are trying to load modern warfare 2 and I am getting a message Error during initialization: Video card or driver doesn't support UBYTE4N vertex data. What are some options?


1. Look online for the newest device-driver for your video-card.

2. Purchase a new "high-end" video-card, remove the old video-card, install the new video-card, and load the device-drivers from the CD-ROM that came with the new video-card.

3. Don't try to load the "Modern Warfare 2" software.

Sep 22, 2010 | Computers & Internet

1 Answer

Monitor goes black after windows boots up


Try removing the video card, and look up your motherboard / system manual on dell's website on how to manually reset the bios.

1. Remove video card
2. Reset BIOS (physically opening the computer and using a special jumper and/or removing the battery...what ever the manufacturer says to do to reset the BIOS).
3. After BIOS is reset, try booting up via your onboard video card first. Once you get that working, go into the bios settings and make sure it is set to boot the onboard only for right now and then you can make sure the ATI software is fully uninstalled when you get into windows.
4. Reinstall the ATI card and boot up with the video still connected to the onboard card. See if it will let you install the driver.

The trick here is to reset the bios and get the system booting off the onboard card if at all possible. If that works, then you can always reinstall drivers and then tweak the bios to boot off the AGP card instead of the onboard.

May 01, 2009 | Rosewill RADEON 9200LE (128 MB) Graphic...

1 Answer

INSTALLED EAH 4870 DARK NIGHT GRAPHICS CARD ON MY HP COMPUTER


does the video card got a HDMI port? in case if you are not using that, you can disable it from BIOS.
Mentioning your mobo model number/sound device would help us to understand and provide a better fix.
let us know the results. thanx

Jan 20, 2009 | ASUS EAH4850/HTDI/512M RADEON HD 4850...

1 Answer

Ps3 wont show or load games


If you originally set up the PS3 with A,V cables it won't work on HDMI even if you set it up to and visa versa. There is a work around but you will have to call tech support. Here is a link at Sony's PS3 tech support that may help also. http://playstation.custhelp.com/cgi-bin/playstation.cfg/php/enduser/std_adp.php?p_faqid=263

Jul 21, 2008 | Sony Playstation 3 (PS3) Console

3 Answers

Multiple display problem


Hello. Your driver software was 71.6MB large. It not only included the driver software but secondary software for you to control & setup dual monitors. The package came with a HDMI connector which is used to connect the HDMI femal port to VGA port, if the monitor does not have a HDMI male port. Currently the reason you can not see your display is because the signal comming out of the video card is set to the other port on the card. Once you switch to the other port you'll have display on your monitor. Open control panel, than open display. Display Properties will open on your desktop. Click settings than click advanced. You should see another tab that reads something like, NVIDIA® nView Multi-Display Technology. (I'm guessing because I only use ATI's software) I can't load your driver software on my current system. The two cards may be different but the software is similar. This Nvidia tab is where you set up your monitor or monitors. Once in this advanced portion for your video card you can set which connector from the video card will display on what monitor. There will also be a ton of settings you can adjust, from color to 3D & other options. You must have an icon by your clock as well that allows you to open the standard display properties or the advanced display properties.

Feb 19, 2008 | MSI NX7300LE-TD256EH GeForce 7300 LE,...

Not finding what you are looking for?
HP f1905 19" Flat Panel LCD Monitor Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18387 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Tony

Level 3 Expert

2600 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...