How to adjust speed of 45 record a little slow on my Rowe Ami JBM 200

Here are all the spares suppliers.

https://www.google.com/search?q=ROWE%2FAMI%0D%0ALaserstar+VI+jukebox+cd-100G+white+plastic+title+page+holders

..

hi
What model is your Rowe Ami jukebox, there will be an information label on the back or inside the jukebox with the serial number and the model type. We can suggest a solution once we know your model type.

Testimonial: "Hi Alan Do you have a website etc as I have two jukeboxes both AMI Rowe, one is a Ti2 this has a speed and selector,problem, the newer one I just need guidance on it plays ok this is an R-91 Many thanks Lisa"

Hello stillwell42,

What model is your Rowe Ami jukebox, there will be an information label on the back or inside the jukebox with the serial number and the model type. We can suggest a solution once we know your model type.

Regards
Alan

Alan Hood
ami-man
UK

https://www.youtube.com/watch?v=88bjldP_D5k troubleshooting error codes in rowe record jukebox

Hello Gary,

If your jukebox is ineed a 1979 model it would be a R-83 Fiesta, Claremont or Disco. These jukeboxes curved top to bottom.
I think your jukebox may be the 1981 R-85 Starwood, Starburst or Starlight.

If your jukebox is from the 1979 era upwards then it will be electronically controlled.
You need to send in your boards to a Rowe Ami specialist in the USA you would contact :-

Bruce Wentworth A&B Jukebox Repair 56 Old County Rd. Plaistow NH 03865. A&B Jukebox Repair specializes in the repair of Rowe circuit boards in Rowe ...
www.abjukeboxrepair.com

In the UK contact me
Alan Hood
ami-man
Games Unlimited & Datex Systems
Units 4 & 5 Lion Park
New Street
Halfway
Sheffield
S20 3GH
0114 247 0242 phone
0114 251 0727 fax
[email protected]

Hi,

The turntable motor on the jukebox range of R-84 to R-93 is none adjustable.
If you are in the USA then the motor operates on 60hz but in Europe it would have to be on 50hz to do this a different pulley is used.

The Rowe Ami part numbers are as followes:-

30791907 Turntable Motor Assembly 60hz
30791908 Turntable Motor Assembly 50hz
21817801 Motor Pulley 60hz
21817802 Motor Pulley 50hz

These can be ordered from a Rowe Ami dealer or you could try www.victoryglass.com

Regards
Alan Hood
ami-man
UK

Thanks for your reply but I really need a repair manual for the model listed below, thanks, Jim

Check the optical sensor, it may be blocked with dust.

Hello,

I take it that the jukebox accepts selections when you type them in. Also that you have tried selecting the A side and the B side records.
Is the switch on the CCC (Central Control Computer) set to Record it should not be set to Video.

Rowe Ami jukeboxes are very pone to dry (cold in the USA) joints.
If you can solder then the following items need to checked for dry joints.

Power Supply PCB (printed circuit board)
CCC
Mechanism Control Board

When taking out the plugs pull on the plugs (not the wires)
Look on the soldered side where the connectors pins are fitted for any cracking around the soldered joint ( this is the sign of a dry joint).
Resolder any suspect joints on all of the boards and refit into the jukebox and test.

If this does not cure the problem then the boards will be needed to be sent to a Rowe Ami specalist, I am one of these in the UK.

Regards
Alan Hood
ami-man
UK