Question about Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker

1 Answer

Code on door says er dH on Kenmore elite refrig

Kenmore elite refrig Model 795.75542401

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This error code has something to do with a defrost sensor and happened after an extended power outage. I unplugged the refrig and it reset itself!

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have frensh door kenmore elite fridge model number 795.72053.110 display error code if someone cane please help me ? ER F5 WHATS THE MEAN .... THANK YOU SO MUCH


faulty cercit board is what you have there sorry to say but it dose happen every so often get in touch with the poeple who you got it off and have the engineer look at it

Jan 22, 2015 | Kenmore Refrigerators

1 Answer

I am getting error code dH.. What is this?


Hi,

Thank you for contacting fixya.com.

DH means defrost heater and refrigerator computer is not sensing the defrost cycle. It is due to a bad defrost sensor located on the evaporator behind the plastic cover in the back of the freezer compartment. You need to replace that.
Also check this link if it helps:-

http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Please get back to us if you have further query else please accept the suggestion.




Jun 02, 2011 | Kenmore 73503 Stainless Steel Bottom...

1 Answer

On the door display it says " ER DH " what does


I found this to be quite up your alley... gives you possibilities for DIY repair.

http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Apr 13, 2011 | Kenmore Elite 44723SS Commercial...

1 Answer

Problems for Refrig. Kenmore Elite


The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

May 03, 2010 | Kenmore 73502 / 73504 / 73509 Bottom...

1 Answer

I HAVE AN ERROR CODE dH on my Kenmore Elite bottom


The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 14, 2010 | Kenmore 77554 / 77543 Bottom Freezer...

1 Answer

Er dh code error on Kenmore elite trio


The Er DH error code indicates the temperature sensor on the evaporator coil did not reach 50 degrees within one hour.
This would indicate the control board did put the refrigerator through a defrost cycle.

This problem could be caused by a defective relay on the control board, a defective defrost heater, a broken wire to the heater, or a stopped up drain on the defrost pan causing ice to form on the evaporator coil.

Before replacing the control board, someone should remove the food from the freezer, remove the freezer drawer, and remove the evaporator cover to expose the evaporator coil, heater, and defrost sensor.
The voltage to the defrost heater should be 120 volts ac.
The defrost heater is part of the evaporator coil and is not replaceable as a separate part.

You can test the operation of the defrost system by pressing "Ultra Ice" and "colder freezer temp" for 3 seconds.
The first time you press and hold the buttons the board will test the compressor, fan, and open the damper.

All displays should be on.


The second time you press and hold the buttons the board will test the compressor, fan, and close the damper.

The third time you press and hold the buttons, the board will turn the compressor and fan off and turn the defrost heater on for around 25 minutes. This would let you know if the defrost system is working.


http://knol.google.com/k/fixing-the-er-dh-code-on-kenmore-elite-trio#

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jul 11, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

I CHANGED THE FILTER AND SET THE SETTINGS AND IT BEGAN TO WORK A FEW HOURS LATER THE DISPLAY WAS SHOWING ER NOW THE REFRIG. IS NOT COLD AND THE FREEZER IS NOT WORKING AND THE ICEMAKER IS NOT WORKING ALL IN...


If this is the Kenmore french door model with bottom freezer and ice and water in the door made by LG it could be that the mother board has failed.  Call for service and hope that warranty is still in effect.

May 19, 2009 | Refrigerators

1 Answer

I have a Kenmore model 795 77563600 refrig side


This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 08, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

2 Answers

I have error code ER dH. Unplug and then replug


Error Code - erdh


Kenmore and LG 795 Series. Model 795.77556600 but most models use the same repair. Controller Part # 6615JB2005H

To Verify correct part. Check part number for your model number at
www.searspartsdirect.com


Don't be intimidated by this repair... The 'erdh' error code indicates - error defrost heater. Replacing the controller is EASY. The difficult part is removing everything in the freezer section to access the evaporator coil but hang in there and stay with it. You will not hurt anything if you use common sense.


The new part (defrost controller) is relatively inexpensive ranging $10 - $14. Here in the SouthWest I used Appliance Parts Depot for a $10 part cost. Don't forget to have 3-4 small wire ties to secure the defrost heater, defrost sensor and wires.


It would help to write down a few notes of some of the particulars during disassembly.


I had the same ERDH error code, and my refrigerator began to warm up. I replaced the defrost thermostat assembly part # 6615JB2005H which is located inside the freezer, on the right side behind the white plastic panel.


(See Diagram Image) I accessed it by removing the freezer door, all components inside the freezer, including the slide rails / tracks mounted on the sides of the freezer. Be careful when removing the rear white panel because an evaporator fan is mounted on the back of it and plugs into the back left side of the freezer compartment. You just saved yourself about $375 or more.

Stay With It & Good Luck!

7_8_2012_5_46_17_pm.jpg

Feb 17, 2009 | Kenmore 73502 / 73504 / 73509 Bottom...

Not finding what you are looking for?
Kenmore Elite 22.4 cu. ft. Bottom Freezer Refrigerator with Adjusta Cube Ice Maker Logo

764 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

minguy15

Level 1 Expert

18 Answers

mike cooper

Level 3 Expert

884 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...