Question about Canon PowerShot A75 Digital Camera

1 Answer

Can't connect to PC via USB cable. I got all drivers.. I've tried it on few different PC's and OS's but nothing happens.. It doesn't even fshows it as a new hardware.. And my PowerShot SD750 connects with no problem with same cable..

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Master
  • 4,738 Answers

This question comes up several times a day here in the camera section at Fixya. But please note, it's very hard to troubleshoot individual software problems online, and it likely is a software/driver issue. But why put up with the headaches of bad software in the first place?

Please don't take the following as a sales pitch as it's not, but please see this link, as it describes the use of an inexpensive card reader as a much easier, faster, and less error prone way to download your photos. In fact there are several important reasons discussed in the article for using a card reader vice downloading from the camera. USB Card readers are also very inexpensive these day, with cost virtually not an issue.

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

H1 won't connect via USB


This page has a download for a driver........ https://www.zoom-na.com/products/field-video-recording/field-recording/zoom-h1-handy-recorder

Also try a different cable....... Good Luck!

Mar 25, 2017 | Zoom H4 Handy Recorder

Tip

Samsung ML-2525W printer & Mac OS X 10.6


I think there are 6 ways (at least?) to connect this printer:
(1) Direct to Mac (or PC) via USB Cable (2) Direct to Mac (or PC) via Ethernet Crossover Cable (3) Ethernet to router/switch, with Mac/PC also via Ethernet to router/switch (4) Ethernet to router/switch, with Mac/PC via WiFi (802.11 wireless) (5) WiFi to router, with Mac/PC via Ethernet to router/switch (6) WiFi to router, with Mac/PC also via WiFi
As (1) should be simplest, tried this first. First document would print instantly and completely, next doc would hang in queue with unexpected msg, "Printer is offline." Only way to print 2nd doc was to power cycle (off-on) the printer. This problem occurred whether 2nd doc was sent to printer before or after 1st doc had printed. Tried 2nd USB cable, tried new driver, tried reinstalling printer; same problem. Spoke to both Samsung and Apple support, including both on a conference call; never got this to work and never clarified if problem was in printer hardware/software, driver, or something else.
Nothwithstanding USB problem, did succeed in modes (4) and (6), although custom wireless config needed since my network does not broadcast SSID and requires an encryption password. Also required different driver for wireless config (as opposed to USB).

on Apr 25, 2010 | Office Equipment & Supplies

3 Answers

Download from lg800g to computer


Is your Micro USB cable a "B" or "A"?Micro USB "B" is for data/charging.
Micro USB "A" is for charging only and will not work for any kind of data transfer (pins not connected).
The connector will be labeled at the micro usb end.
When you plug the cable into your phone a popup will ask you if you want to connect to mass storage. Once you answer yes, you can connect to the phone just like a usb drive.

Dec 13, 2011 | LG Cell Phones

2 Answers

I put my memory card into the Dynex reader and nothing is happening


Move the reader to a different USB port. If that doesn't work, the reader's probably given it up. I've seen several of this brand reader die an early death, for no apparent reason.

Jun 16, 2011 | Computers & Internet

1 Answer

I am trying to install the Lexmark X3690, but when it asks for the ?USB cable to be connected, the "continue" option is greyed out & I cannot complete the install. If I select the...


Make sure the printer is switched on when you connect the usb cable.

You can connect the USB cable without installing the software first. If you do this then Windows should detect the new hardware and try to install the drivers. If this does not happen then your printer is not communicating via the USB cable. Check the cable. If this os OK then the printer may be faulty.

Mar 14, 2011 | Lexmark Office Equipment & Supplies

2 Answers

Connect Kyocera Mita FS-1010 to Macbook (OS X 10.5)


in FS1010 printer usb port avilable u can connect the printer through usb port .

please delet ur printer driver and reconfigure it . use a usb cable to connect the printer it will work.one more u can put ur printer in network

Dec 23, 2008 | Kyocera Mita FS 1010 Laser Printer

2 Answers

Brother MFC-210C INSTALLATION


Try plugging into a different USB port on your computer.

Jul 18, 2008 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Sync


This is the worst mp3 player ever invented - i have to tell you this up front. There is no driver, the company does not support the product anymore - I would return it now while you still can.

Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

Oct 14, 2007 | iLO (2 GB) MP3 Player

Not finding what you are looking for?
Canon PowerShot A75 Digital Camera Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Cameras Experts

kakima

Level 3 Expert

102366 Answers

TC CAMERA REPAIR.Com...

Level 2 Expert

168 Answers

old marine
old marine

Level 3 Expert

1919 Answers

Are you a Canon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...