Question about Computers & Internet

1 Answer

Monitor blacking out

When I turn on my computer, monitor is also on, but the screen is black. I turn the monitor off and on, and it shows what it should for about a second before it blacks out again. If I leave it alone for a while, then turn it off and on again, it works.
Why does it keep blacking out?
How do I make it stop?
So far the only answers I've been able to find involve taking it apart or getting a new one, both of which I'd rather avoid.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,684 Answers

Hello,
The problem you are having is the internal power supply and the only way to get it going again will be to replace the bad parts inside. We offer a LCD repair service for $35.00 plus shipping if you are interested. You can contact me on our web site below.

Buddy
Corporate Computer
www.ccl-la.com
Over 21 years of computer and printer support/repair

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Problem with monitor


Since the monitor is working normally other than turn off, I suggest plugging it into a power bar with switch. The pad switch is probably defective in the monitor.

Mar 11, 2012 | Dell Computers & Internet

1 Answer

My monitor showes for a split second then goes black


First, can you attach another monitor to the computer to check to see if it works?

If it does, then your monitor is going bad. Possibly the power supply.
If a second monitor acts the same way, then it's your video card.

Dec 10, 2009 | Computers & Internet

1 Answer

Screen turned black


your monitor got a hardware problem:
1) the LVDS controler board out of work, only change or repair it could be fixed.
2) if you can see some show like smaller signal detect windows in the centre of screen a very short time (bright flashing one time), this is inverter board damaged or worn lamps, thay all need repair or replace
hope give you some idea. please take a rating let me know how much helped you thanks!

May 20, 2009 | Dell E176FP 17" LCD Monitor

1 Answer

The l226wtq goes black


Try shining a flashlight on the screen, or without the flashlight, try to see if you can distinguish anything on the screen at all, if you do, the backlight is dead, or the monitor has an internal most likely unfixable problem.

May 01, 2009 | Computers & Internet

1 Answer

Backlight for display cuts out


Bad capacitors are a plague now, most likely cause of the black screen

simply remove the doomed and caps that have color leaking from the top. and replace with duplicate good caps from your local electronics store


Mar 22, 2009 | HP W2007 LCD Monitor

1 Answer

LCD show right picture for 1 second when I turn on, then go black


you need to read the monitor manual . other wise you can contract the dealer.

Jan 21, 2009 | Computers & Internet

1 Answer

Screen black


Take the post (power on self test) disconnect vga cable and connect power cable if monitor shows no signal check signal cable massage then monitor is ok fault is in cpu. open it and clean the dust
by vaccum cleaner you will get the display again

Oct 17, 2008 | X2Gen MG19MY 19" LCD Monitor

1 Answer

MicroATX motherboard work but the monitor shows a black screen.


I assume the monitor is turned on? Try the monitor with a known good computer to verify it's OK. I believe this board has AGP video. Verify that it's properly seated, or try another board.

Sep 13, 2007 | AMD Asus A7V-ML Socket A MicroATX...

1 Answer

Monitor sleeps after one second


Try connecting the wires properly. try changing the VGA cable. i had the same problem my screen goes black some times and pink i changed the VGA cable it was absolutely fine!!!
What is VGA cable
VGA Cables Adapters Converters and Devices C2G

visit a computer mechanic for further trobleshooting

Mar 17, 2017 | AcerView F51 15 in. Flat Panel LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...