Question about Whirlpool Calypso GVW9959K Top Load Washer

2 Answers

My washer is stuck on the wool cycle and won't wash,change cycles

The washer is stuck on the wool cycle and just beeps. i have unpluged it and it stills does the same thing...need advice on what to do

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Running the fingers back and forth worked for me

Posted on Sep 23, 2012

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I had the exact problem. I am not sure if this is the fix, but I unplugged the machine over a few hours, then plugged it back in. It stayed off for 20 seconds and then went back to the wool cycle. In frustration, I opened the lid while running my fingers over the cycle select buttons quickly back and forth two times, as I closed the lid, the display cleared and the machine returned to normal, so far anyway. It seemed as if some moisture had gotten in the controls somehow. It was a very humid day and I think that was the problem,after all. My machine is over ten years old, and the only other problem was a clogged drain pump. I used advice from this website to fix that, and saved 300 on repairs at least

Posted on Jul 30, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is it beeping and stuck on the wool cycle


will be some blocked up filter or water supply
if its beeping then this is usualy something blocked up with oose

Sep 04, 2014 | Dyson CRO1 Front Load Washer

1 Answer

Washer stays in wash cycle will not spin out i changed control board no help


Isyour washing machine displaying an error code? If so, try using the owner's manual to decipher the code and you may beable to easily diagnose the problem. The problem could be as simple as the doorbeing slightly ajar, the machine is in pause mode, or the spin selector isstuck. Checkthe handy chart in the article Washingmachine won't advance to washer spin cycle for more possible reasons why your washingmachine won't advance to washer spin cycle-and some tricks for getting itworking again.

Aug 01, 2012 | Electrolux Washing Machines

2 Answers

My magtag 5000 series washer is flashing error code F21, It was in the middle of a wash cycle and now the door is locked and it won't open. How do I at least get the door open. I have unplugged the


Unplug the washer. Then plug it back in and press the button that turns it off. This should unlock the door. Same thing happened on mine and there was a kink in the drain hose. Once I unkinked the hose, unplugged it, plugged it back in, turned it off, then I was able to run a drain & spin cycle to get the water out of the load that was in the washer. I then ran a full wash cycle (they'd gotten stuck in the first drain & spin cycle of a wash) and everything seems to be fine now.

Dec 04, 2011 | Maytag Washing Machines

1 Answer

Calypso washer display is freaking out.. It


change the panel. buttons are shorted wool button

Feb 01, 2010 | Whirlpool Calypso GVW9959K Top Load Washer

1 Answer

Machine stops and will not move to next cycle--spin


Sounds like it it not recognizing that the lid is closed, could be a bad lid switch.

Apr 14, 2009 | Fisher and Paykel Fisher & Paykel Washer

1 Answer

END OF CYCLE KEEPS BEEPING WHILE WASHING


Maybe the machine is telling you that your load is uneven, When going through a spin cycle it will detect if the load is too heavy on one side. Just open the door and spread the load evenly. good luck.

Jan 26, 2009 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

CALYSPO WASHER DIGITAL DISPLAY+ALERT BEEP


THe timer/ECU is failed. Replace it.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Jan 16, 2009 | Washing Machines

Not finding what you are looking for?
Whirlpool Calypso GVW9959K Top Load Washer Logo

Related Topics:

274 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76051 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...