Question about Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

We have lost and no one knows what the WEP WAP password is for our 3347NWG Netopia DSL Modem/Router and we no longer have the disk for the modem/router and have had a failure of one of our network computers hard drive. Although I have been able to get the USB Wireless adapter to work for the failed computer and although it does recognize that a wireless network exists, I cannot log on because I do not have the code to log onto network with. Is there a way to retrieve the code from the dsl modem/router or a way to reset the entire network without the disk or driver for the modem/router?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,923 Answers

Unfortunately, no one could provide you the WEP or WPA network key for your modem/router. As the owner, you should always remember it. Since you could no longer remember it, you need to reset or restore the factory default of your modem router. To do this, please follow the steps below:

1. Locate the "Factory Reset Switch" opening on the back of the modem/router.
2. Use the point of the pen or a paper clip and press it for 5 seconds.

If you need instruction for reconfiguring the modem/router, you may check the link below and refer to the "Table of Contents":

http://www.retrevo.com/support/Netopia-3347NWG-ENT-Wireless-Routers-manual/id/1082ci253/t/2/

To download the driver, kindly check the link below:

http://list.driverguide.com/list.php/list/company2365/device12/index.html

Hope these helps and have a great day!


Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Router rejects password


router admin password can be different from wireless password.
this page should help:
http://portforward.com/default_username_password/Netopia.htm
good luck

Nov 22, 2013 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

Serial number idm 617b6(1)


where is my serial number of idm617b6?

Oct 07, 2013 | Netopia Wireless DSL Modem/Router...

1 Answer

Find wep key 3347nwg -006


Try Password: admin, 1234, serial number of unit (written underneath)

Or you could connect to it with a Ethernet Cable and open web browser and go to 192.168.1.1 or 192.168.1.0 or 192.168.1.254 and you can access settings from there and change WEP password.

Last resort, just use the reset button on the unit.

Jun 19, 2012 | Netopia Wireless DSL Modem/Router...

1 Answer

I need to find out the web key for my netopia 3347nwg modem my son accidently pressed the reset button in the back


If you mean the reset button has been pushed and now the modem needs re-programing, then the modem has defaulted to its factory setting. Its IP address is now 192.168.1.254, its user name is Admin, and its password is the same as the serial number of the modem, usually found on the label on the bottom of the unit.

Aug 17, 2011 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

I'm trying to find the WEP for the netopia router where do I find this


Hi,


Welcome to Fixya. If you want to obtain the Wep Key or Network Key on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.1.1. Go to the Wireless Settings Page you will see there Network Key or Passphrase. The Network Key serves as a password or security code on your network to make it secure.

Thanks for using Fixya.

Feb 06, 2011 | Netopia (3347NWG-ENT) Router (3347NWGENT)

2 Answers

Connect a wireless router with DSL modem


From the DSL enter into the router on WAN port.
Setting a secure network means, to set a password for your router, also set a password for your wireless too. Use WEP encryption, is better than WAP.

Aug 27, 2009 | Linksys Wireless-G Broadband Router

1 Answer

How do i identify the wep key for my router?


Here is the manual to WEP configuration:

http://netopia.com/support/hardware/technotes/NQG_113.html

And here is the manual for the whole device:

http://netopia.com/support/hardware/3347nwgent.html

Jul 21, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

Need to forward to static ip


access your modem i belive the ip address is
192168.0.1
if not then run an (ipconfig) on ur command prompt
use the default gateway on ur address bar
by default the username and password are both (admin)
if you set ur own up then im sure u know what it is
go inthe modem click on
(advanced) then on (ip static routes) and type in information that should take care of it !

rate my service please
july
thanx

Apr 20, 2009 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

My router reads waiting for dsl


yes, youi can use as just a router, I use to do it myself, I had a netopia behind a linksys

but the netopia is actually a modem/router in 1.

you can also use as just a modem if you put it in bridge mode.

spin

.

Nov 12, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)

1 Answer

I hooked up my wireless and dsl router again and I forgot the password to get into it


Try a hard reset (small button on the back of the router, usually recessed and accessably using a paperclip to push it in)

This will restore the router to factory settings. The password and user name will revert back to the factory ones which for netgear is

User Name = admin
Password = password

Then once your into the router settings you can set the username and password to something you want.

Hope this helps

Aug 15, 2008 | Netopia (3347NWG-ENT) Router (3347NWGENT)

Not finding what you are looking for?
Netopia (3347NWG-ENT) Router (3347NWGENT) Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Netopia Computers & Internet Experts

Douglas  Erikson
Douglas Erikson

Level 2 Expert

62 Answers

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Netopia Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...