Question about Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348

1 Answer

Husqvarna gth main belt keeps breaking

Husqvarna gth 2350 main belt keeps breaking replaced it 4 times breaks every year almost to the date . Normal cutting

Posted by on

  • sanchez1 Aug 01, 2009

    In the past I have leveled , also checked the front and rear adjustments and even made it more exagerated than the book states . I have visted a local Husqvarna dealer and the sales guy practically told me that he had a problem with this machine and it lasted 3 weeks with him . since then husqvarna has changed the cutting deck design . I contacted Husqvarna for advise the person said basicaly buy another belt. so I did and readjusted everthing again . it's funny when I walked into the dealers store He knew what i needed right off the bat.. So much for husqvarna Never and I mean never buy one . you will be sorry.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 95 Answers

Make sure the mower rake angle is not too much,On level floor point one of the blades in a front rear orientation,measure height of blade from floor the front measurement should be no more than 1/4" lower than the rear measurement.If the front of the mower is too low the angle the belt has to run is too much and the belt will twist and wear rap[idly.To raise the front of the deck there are either one or two adjustment rods that attach the front of mower deck to frame tighten this adjustment up to raise the front of mower deck.

Posted on Jul 30, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


Mower belt diagrams

Riding Mower Deck Belt Diagrams DIY Repair Manual AYP MTD John Deere Sears...










on May 20, 2015 | Garden

1 Answer

I need to know the placement of the deck belt on my husqvarna mower 26k54t. I think I keep twisting it the wrong way, which pulleys need the flat side of the belt on?

Sep 09, 2016 | Husqvarna Garden

1 Answer

1998. Why does drive belt keep breaking?

Hi, Anonymous the main reasons are belt tension to tight, sprocket pulleys out of alignment, or sprocket pulley teeth are damaged, worn to a square profile instead of round, sorry you can not find the first and best tool you ever bought for your Harley despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below, and for specific information or questions feel free to contact me at Good luck and have a nice day.
Why Did Your Drive Belt Secondary Drive Break
Drive Belt Keeps Breaking
Best Drive Belt to use keep breaking belts Harley Davidson Forums
Harley Davidson Manuals Mark Workshop
Owner Manuals Harley Davidson USA
Instant Tech Relief A must have !!! only $6 a month cheap

Apr 06, 2016 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

My ride on mower is not cutting the grass as the belt keeps on breaking after doing one strip of the garden iv bought 3 new belts in the space of 4 days it seems to only wear in one side then stretch and...

Have the pulleys checked for worn bearings and improper alignment which can cause this to happen Also the cheaper belts do break when cutting wet grass. Example.... My John Deeres belt cost $75 for a new factory one. A generic Goodyear belt runs $15. Guess what happens when I cut wet grass witha Goodyear belt? Yes it flies off. The Deere belt will stay on for it is made with a protective rubberized coating incased in fabric. If you are using a inexspensive belt you will get a lot of grief from it

Jul 09, 2011 | Husqvarna Garden

1 Answer

Model 2254 deck belt jumped loose, need diagram as to how it winds "top view"

hi there senator359

pauly46 here

please find web site for a manual that has belt roueting in it

it is lgt2654

go to web site down load and print

here is husqvarna gth 2254 web site for diagram

check them both out

let me know if helps

dont forget the thumbs rating

cheers pauly46

Jul 08, 2011 | Husqvarna Lawn Tractor - 54in. Deck, 26...

1 Answer

Is it normal to have to replace pulley, timing belt and fan belt in renault megane cabriolet after 5 years. How much do these spare parts cost? Have been quoted £750 parts and 6 hour labour costs.

Timing belt on 4 cylinder Renaults should be changed every 50-60000 Km. Consequence of not doing so is having the belt break, and damaging valves and valve lifters (extremely costly) . Replacing the belt is time consuming, and labor intensive. So while the belt is out, its is a good investment to replace pulley, belt tensioner/ roller bearing and water pump belt, which is nearby and has to be taken out anyway, for timing belt replacement. Meganes dont have fan belts, they use electric motors for this duty.

Feb 16, 2010 | Renault 181 Cars & Trucks

1 Answer

My 2004 Tacoma has 84k miles and due for warranty service. Automatic, 4WD, V6. The expected normal cost for this service (and major items). Vehicle runs great and is well maintained to date. Questions:...

it has a belt that needs to be replaced at its service interval. Yes ,damage can occur if it breaks. They usually break within 20,000 miles after

Nov 28, 2009 | 2004 Toyota Tacoma

1 Answer

Drive belt keeps on breaking

If the drive belt on your unidentified piece of equipment, of unspecified age, breaks repeatedly, it is either caused by:

A) The belt rubbing against something.
B) One of the belt pulley's are not spinning free. (bad bearings, etc)

Aug 14, 2009 | Husqvarna Garden

Not finding what you are looking for?
Husqvarna Lawn Tractor 48" Deck, 23 Hp, Model# Yth2348 Logo

991 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Jim Parker
Jim Parker

Level 3 Expert

1041 Answers

Phil Walker
Phil Walker

Level 3 Expert

608 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides