Question about 460HP Security System

1 Answer

I need to program a new remote for a python 460HP. I cant seem to enter programming mode the way it was eplained to me "Open Door, Turn key to ON position, Proess valet once and release. Then press and hold. Press and hold Remote transmitter and release. Am I doing something wrong?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I bought a remote on ebay and im try to program it its a python 474p

Posted on Aug 21, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to get into programming mode to program a remote?


Few Toyota models came equipped with remote door locks before 2008 - surprisingly!

Your car may not have the radio receiver to work with door locks. In that case, you need the radio and some wireing to pair with your remotes.

Jul 31, 2014 | 2004 Toyota Sequoia

1 Answer

Need program to add additional key fob to my Python 474P model on a 2005 Kia Sportage


To program additonal remote; open door, turn ignition on. Press and release valet button one time then, press and hold valet button. While holding valet button, press lock button on new remote. Turn ignition off. Test system.

Sep 29, 2012 | Remote Start System

1 Answer

How do i program a new keyless remote for my 2002 Suzuki Aerio?


. Remove key from ignition switch.2. Close all doors.
3. Open drivers door
4. Insert key and turn to ON position and within 10 seconds turn
key off and remove key.
5. Within 20 seconds Close and open drivers door 3 times.
6. Insert key and turn to ON position and within 10 seconds turn
key off and remove key.
7. Locks should now lock and unlock automatically to confirm you
have entered programming mode.
8. Press the UNLOCK button on remote and locks should cycle to
confirm programming.
9. Repeat step 8 on each additional remote.
10. Exit vehicle with keys and remote, close door test remote(s).

Jul 13, 2012 | 2002 Suzuki Aerio

1 Answer

How to reprogram Python 4Button Remote 474P ?


I had the exact same thing happen with my 4-button 474p remote. WITHOUT REMOTE START the correct sequence is:

1. Enter car - Leave door open.

2. Turn key to "on" position.

3. Within 5 (five) seconds press the Valet button 7 times then hold down. (Programs to channel 7)

4. Watch alarm light - It should now flash 7 times.

5. While still holding down the Valet button - Press the "lock" button on the remote and release. Should get a "chirp"

6. Now release and repress the Valet button once, holding down. You'll get the "chirp". Release Valet button.

7. Turn key "off". Exit vehicle and test remote. All 4 buttons should now work.

Mar 09, 2012 | 4Button Remote 474P

1 Answer

How to turn light on the python 990 remote?


If you just want the LCD backlit turned on, press and hold the program button on the back of the remote until the remote gives a long tone, that indicates that you've entered programming mode. Then within 5 seconds of entering programming mode press the the unlock button. The remote will beep once for backlight on and twice for backlight off. In the "on" setting your backlight will turn on each time a button on the remote is pressed. It will run down your battery faster though. It's the same for both the 990 and the 950 remotes.

Nov 16, 2010 | 990 And 950 Responder SST Remote - 7701P

1 Answer

Where can I buy extra "CLICKERS"??? for this system and where can I get them programmed


ebay or right on pytons web site...the remotes will come with programing instructions....also could bring it to just about any car audio shop...

Aug 26, 2010 | 460HP 1way Security System

2 Answers

How do you change the keyless entry code


You need to key in the original key code, then within 5 seconds press 1/2 button. Key in your new code, then the door locks should cycle to indicate the code has been saved.

Aug 12, 2010 | 2002 Ford Explorer

2 Answers

How do I get the car alarm out of valet mode?


leave a door open then turn ignition on then off and push the valet switch one time within 10sec

May 23, 2010 | 426P 460HP Security System - 426P

1 Answer

Keyless remote wont work


try to reprogram the remotes using these instructions..........
i assume for 02 explorer not th 05 frestyle listed (although similar procedure)
Remote Transmitter Programming NOTE: All remote transmitters are programmable and must be set at the same time.
  1. Make sure that the anti-theft system is not armed or triggered and key code programming is not active.
  1. Open the door, then press the driver door lock control switch UNLOCK button.
  1. Turn the key from OFF to ON 8 times within 10 seconds, with the eighth turn ending in ON. If the program mode is sucessfully entered the doors will lock and unlock to confirm.
  1. Press any button on a remote transmitter, and the doors will lock and then unlock all doors to confirm that the remote transmitter is programmed. All remote transmitters must be programmed within 20 seconds of each other. Up to four remote transmitters can be programmed to the vehicles security module each time programming mode is entered.
  1. If the door locks do not respond for any remote transmitter, wait several seconds and press the button again. If the door locks still fail to respond, refer to Locks, Latches and Entry Systems — Late Build or Locks, Latches and Entry Systems — Early Build in this section.
  1. NOTE: Exiting is acknowledged by locking and unlocking the doors if at least one remote transmitter has been programmed.
    Exiting the programming mode is accomplished if one of the following has occurred:
    • The key transitions to OFF.
    • 20 seconds have passed since entering programming mode or since the last remote transmitter was programmed.
    • Four remote transmitters have been programmed.

Jun 02, 2009 | 2005 Ford Freestyle

1 Answer

I want to diable the alarm without,not the door locks It is a (Python 426P 460HP security system)It does have a remote.Thanks


Locate the valet override/program button. Turn key to "run" position, push and hold button for a couple seconds, and that should put it in valet mode. Door locks will still function with remote, but alarm will not arm. LED should stay on solid.

Apr 22, 2009 | 426P 460HP Security System - 426P

Not finding what you are looking for?
460HP Security System Logo

Related Topics:

1,150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Python Vehicle Parts & Accessories Experts

rjivaro

Level 2 Expert

153 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

AzVip

Level 2 Expert

114 Answers

Are you a Python Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...