Question about SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

3 Answers

Computer does not recognize the usb - SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive

Posted by on

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 1,006 Answers

Possibilities:
1) One of your USB devices have faulted, or is causing a resource conflict (or similar)
-- Remove all USB devices, and reboot.
2) Your USB chip/ports have been damaged.
-- Find a spare HardDisk or bacjup your data and re-install Windows and see how that goes.
3) Your Power Supply Unit (PSU) isnt supplying enough power to your PC (usually caused by a Video card upgrade). Try a more powerful PSU ... 400watts should do the trick
4) Bad memory (RAM) can cause wierd problems. run memtest for an hour to make sure your memory is ok





It seems that many people are still getting the 'USB Device not Recognized' problem from time to time. Unfortunately there is no easy fix.
Firstly, it's recommended that you make sure every one of your motherboard drivers are completely up-to-date, but you probably already knew that.
In XP, after a USB port isn't used for a long while the USB driver built into the OS sets the OHCI controller to suspend. When you plug a device back in, it can sometimes fail to 'wake up' properly. This problem was supposedly fixed in SP1 but there is a related registry hack that may still be able to help.
Run regedt32.exe and navigate to;
HKEY_LOCAL_Machine\SYSTEM\CurrentControlSet\Services\Usb
Create the Usb key if it doesn't already exist. Under this key, create a new DWORD value called DisableSelectiveSuspend and give it a value of 1. Then restart the PC.
A long shot perhaps, but I recall having similar problems with a USB hub built into my Microsoft keyboard and adding this key seemed to solve it. It wouldn't hurt in trying .
Alternatively, removing all entries relating to USB in Device Manager and all associated USB drivers will force XP into refreshing the USB driver stack.
Begin by unplugging all USB devices, then use Add/Remove Programs in Control Panel to uninstall any USB driver software. Next, boot up into safe mode and go to Device Manager. Once in device manager make sure 'Show hidden devices' is checked under the View menu. Uninstall all device entries in this order;
1. USB peripheral devices (printers etc.)
2. HID and/or Composite USB (Human Interface Devices) You're using PS/2 input devices so you may not have this entry.
3. USB Root Hub(s)
4. USB Host Controller(s) (Universal or Enhanced Host Controllers)
Then boot back into Windows (not safe mode) and it should populate the Root Hubs & Host controllers again. Proceed to plug your USB devices back in, starting with your powered hub. Be aware that most USB printers and scanners need to have their drivers installed first before you plug them in.
Hopefully some of this may be of help, let us know how you get on.

Posted on Nov 18, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Here’s an interesting tutorial covering troubleshooting USB sticks. One of the hints here could be all you need:
http://filetonic.com/blog/2009/07/14/reformatted-pc-cannot-read-usb-sticks/

Posted on Jul 14, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Malfunctioned USB

Posted on Jul 05, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was checking some of the files on my usb. When it became unresponsive I rebooted it. After doing so, my usb ports wouldn't recognize any usbs(camera, printer, etc.) I kept trying and I got them to work...


Hi. If your saying that you're USB is not being recognize by your computer then you should try that USB on a different machine and try if its working there, and if yes the problem is with your computer you just need to update the drivers on your computer to recognize your USB, and if not I think the USB has the hardware issue. Hope This Helps

Jun 04, 2010 | PNY 4GB USB 2.0 Flash Drive - Grey/Black

Tip

How To Fix Usb Device Not Recognized in Windows


Sometimes, when you plug a USB device to your computer you may receive a Usb Device not recognized or usb port not working pop up message. If your USB device is not detected, then we will show you how you can troubleshoot usb not recognized error.

Follow Quick Steps To Resolve Usb Not Recognized Error Windows:

Press "Windows" + "R",a run window will open
In the "Open" box of the run window type "devmgmt.msc" and press "Enter"
This will open theDevice manager
Click on the arrow besides "Universal Serial Bus controllers"
Right click on each USB port and then click on "Uninstall"
Restart your computer and wait for Windows to re-installs USB controllers.
Try to connect yourUSB deviceagain.
How To Fix Usb Device Not Recognized In Windows 7 8 1

on Jan 28, 2015 | Computers & Internet

3 Answers

My adaptor is not recognized in my USB ports I installed the router and it completes all of its connection checks. I am trying to install the adaptor on a remote computer (in the basement) and that...


Here's what you can do since this is a USB wireless adapter, first connect the USB adapter on a different USB port on the computer better if you connect it on the back USB port of the computer tower and check if the computer will recognize it and if its recognize you can already continue with the software installation , but if not you can restart first the computer and check if the adapter will be recognized if still not the next thing to do here just to know if the adapter is good or bad is to connect it on a different computer and just to check if it will be recognized once its connected to a USB port , because a device should be automatically will be recognized by a computer once you connect it so if its still not recognized by a different computer adapter is bad...

Dec 15, 2009 | Computers & Internet

1 Answer

My computer is not recognizing my external usb


Try to plug it in another hub, if your computer still doesn't recognize it, try plugging it in another computer and see if that computer recognizes it. If it does, then there might be something wrong with other computer. If it doesn't, then there might be driver issues with your USB.

Nov 13, 2009 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

Usb device not recognize


You mentioned that you uninstalled the unknown device from the Device manager. If you uninstall it then connected your usb flash drive you will see an error again on your device manager. This means that the driver for your usb port is not properly installed.

To install it, visit dell website, look for the model of your machine and locate the driver, download it then install from your machine.

Jun 02, 2009 | Dell Inspiron 6400 Notebook

2 Answers

USB device not recognized


This solution worked for me when I got the USB device not recognized message:
http://www.infobarrel.com/USB_Port_Repair
It can be quite frustrating. I've heard that older computers are more likely to have the USB device not recognized message.

May 31, 2009 | Dell Inspiron 6400 Notebook

1 Answer

My computer dont recognized my mp3 m-230 what can i do ???


mostly, mp3 devices comes with a software.

if u have the software, and the usb dont recognize your mp3 device. most probably the problem is in you usb drive or usb connector.

Feb 27, 2009 | SanDisk Sansa m230 MP3 Player

1 Answer

Windows XP will not recognize my WD 250GB Harddrive


Just plug your USB HDD directly into your MBoard's USB port...

Feb 09, 2009 | Western Digital 250GB MyBook External USB...

1 Answer

Computer doesn't recognize usb device...


do not use Front usb connector. put your device in backside of CPU usb port. it wil work fine.

Mar 05, 2008 | Belkin BLKF5U201 USB Peripheral...

Not finding what you are looking for?
SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard Drive Logo

619 people viewed this question

Ask a Question

Usually answered in minutes!

Top SanDisk Computers & Internet Experts

Arora Singh
Arora Singh

Level 2 Expert

180 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Sandy Moore
Sandy Moore

Level 2 Expert

111 Answers

Are you a SanDisk Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...