Question about KLH R5100 Receiver

1 Answer

Some where there is a button to switch between a powered AMP and a Nonpowered AMP. Can you Tell me Where to Do that??

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 287 Answers

I might need some clarification on your question and what you are needing this receiver to do . But let me take a shot at this. Your amp has a powered output via the speaker terminals and a preamp output via your record output rca jack or any other rca jacks label preamp out or preout. I is no switch to turn your power amp on while leaving your preamp on, but you can switch the speaker a and or b switch off if you like. If you are refering to a powered subwoofer set up you would connect this to your preamp subwoofer out jack then very the level with the subwoffers volume control. You might need more detail in your question if this is not what your looking for.

Posted on Jul 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PTO WILL NOT CUT ON


I would check that you have a 12 volt supply down at the clutch when the pto switch is pulled out, if not you need to investigate the wireing and or micro switches,

Mar 13, 2012 | Ariens Zoom 34" (Stamped Deck) Zero Turn...

1 Answer

How do ytou adjustadjust the steering on ariens zoom mower


The owner's manual tell you. If you don't one. Go to www.mowersdirect.com/manuals/zoom4250pdf and download one.

Feb 18, 2012 | Ariens Zoom 34" (Stamped Deck) Zero Turn...

1 Answer

My n73 is not switch on permanently so how to solve this?pls inform to me...tell what problem and how can i solve


sir, this problem occurs due to virus infections, so kindly format your phone, follow the given instructions,
1. Switch off your phone...
2. Remove SIM card & memory chip...
3. Now press & hold keys - 3,*,call green) ...
4. Then without leaving these three buttons press power button...
5. Formatting task will be started...
6. Remember its a very rare trick....

Dec 28, 2010 | Nokia N73 Cellular Phone

1 Answer

Cartridge is not recognize, it states that my cartridge is not installed properly, i already tried to removed it and reinstall it but always the same result.. help pls


1. Switch off the printer (the button Power ).

2. Holding button Resume , include the printer (press the button Power ).

3. Holding button Power , release button Resume (indicator of the feeding/readiness must glow green)

4. Not releasing button Power , two times press button Resume and release both buttons
- under each striking the button Resume indicator of the feeding/readiness changes the colour (one striking yellow, the second striking green). Beside printer, having more one indicator indication is switched (indicator of the feeding/readiness green, indicator mistake yellow)
- after buttons will be отпущены, indicator of the feeding/readiness certain time will twinkle green (time моргания depends on models of the printer), then green fires constantly
- if after these action instead of constantly burning green printer continues to show the mistake, that or you mistakenned in points 1 4 (switch off the printer and repeat with point 1), or beside printer additional mistake, which necessary to avoid, otherwise he will not fall into service mode (that means this mistake possible hear here).

5. Four times press the button Resume (under each striking the button Resume indicator of the feeding/readiness changes the colour, but beside printer, having more one indicator indication is switched: readiness/ mistake).

6. Once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера). For switching off the printer button Power press once again.
For some printer (for instance, iP2000) for switching off it is necessary to press Power once again i.e. three times contract.

Some printers have two counters абсорбера Main and Platen (Bordless), and if after unset Main waste ink counter ( as is described in this instructions ) after leaving from service mode printer continues to show indication an overflow абсорбера repeat all points to instructions before point 5 inclusive, then instead of point 6:
# For printer iP2000 and iP6220d
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
# For printer iP3300, 6210d, pro9000, pro9500
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
or
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then two times press the button Resume (the unset simultaneously two counters) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again. (For printer pro9000 and pro9500 in documentation is specified only this variant of the unset)

Sep 30, 2009 | Canon PIXMA iP1300 Printer

1 Answer

Canon doc 203 both light blinking


1. Switch off the printer (the button Power ).

2. Holding button Resume , include the printer (press the button Power ).

3. Holding button Power , release button Resume (indicator of the feeding/readiness must glow green)

4. Not releasing button Power , two times press button Resume and release both buttons
- under each striking the button Resume indicator of the feeding/readiness changes the colour (one striking yellow, the second striking green). Beside printer, having more one indicator indication is switched (indicator of the feeding/readiness green, indicator mistake yellow)
- after buttons will be отпущены, indicator of the feeding/readiness certain time will twinkle green (time моргания depends on models of the printer), then green fires constantly
- if after these action instead of constantly burning green printer continues to show the mistake, that or you mistakenned in points 1 4 (switch off the printer and repeat with point 1), or beside printer additional mistake, which necessary to avoid, otherwise he will not fall into service mode (that means this mistake possible hear here).

5. Four times press the button Resume (under each striking the button Resume indicator of the feeding/readiness changes the colour, but beside printer, having more one indicator indication is switched: readiness/ mistake).

6. Once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера). For switching off the printer button Power press once again.
For some printer (for instance, iP2000) for switching off it is necessary to press Power once again i.e. three times contract.

Some printers have two counters абсорбера Main and Platen (Bordless), and if after unset Main waste ink counter ( as is described in this instructions ) after leaving from service mode printer continues to show indication an overflow абсорбера repeat all points to instructions before point 5 inclusive, then instead of point 6:
# For printer iP2000 and iP6220d
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
# For printer iP3300, 6210d, pro9000, pro9500
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
or
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then two times press the button Resume (the unset simultaneously two counters) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again. (For printer pro9000 and pro9500 in documentation is specified only this variant of the unset)

Sep 30, 2009 | Canon Office Equipment & Supplies

1 Answer

I cant print with my canon ip1300 printer? why?


1. Switch off the printer (the button Power ).

2. Holding button Resume , include the printer (press the button Power ).

3. Holding button Power , release button Resume (indicator of the feeding/readiness must glow green)

4. Not releasing button Power , two times press button Resume and release both buttons
- under each striking the button Resume indicator of the feeding/readiness changes the colour (one striking yellow, the second striking green). Beside printer, having more one indicator indication is switched (indicator of the feeding/readiness green, indicator mistake yellow)
- after buttons will be отпущены, indicator of the feeding/readiness certain time will twinkle green (time моргания depends on models of the printer), then green fires constantly
- if after these action instead of constantly burning green printer continues to show the mistake, that or you mistakenned in points 1 4 (switch off the printer and repeat with point 1), or beside printer additional mistake, which necessary to avoid, otherwise he will not fall into service mode (that means this mistake possible hear here).

5. Four times press the button Resume (under each striking the button Resume indicator of the feeding/readiness changes the colour, but beside printer, having more one indicator indication is switched: readiness/ mistake).

6. Once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера). For switching off the printer button Power press once again.
For some printer (for instance, iP2000) for switching off it is necessary to press Power once again i.e. three times contract.

Some printers have two counters абсорбера Main and Platen (Bordless), and if after unset Main waste ink counter ( as is described in this instructions ) after leaving from service mode printer continues to show indication an overflow абсорбера repeat all points to instructions before point 5 inclusive, then instead of point 6:
# For printer iP2000 and iP6220d
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
# For printer iP3300, 6210d, pro9000, pro9500
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again.
or
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then two times press the button Resume (the unset simultaneously two counters) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again. (For printer pro9000 and pro9500 in documentation is specified only this variant of the unset)

Sep 28, 2009 | Office Equipment & Supplies

1 Answer

Canon MP830 HAVE A ERROR CODE 6A00 WE HAVE INK PROBLEM CUZ IT DOES'T RUNINIG


Canon MP170, MP450, MP530, MP600, MP610, MP800, MP810, MP820, MP830, MP960, MP970
MX700, MX7600, MX850

1. Switch off the printer (the button Power ).

2. Holding button Resume (the red triangle in кружочке), include the printer (press the button Power ) - an indicator fires the green colour.

3. Holding button Power , release the button Resume .

4. Not releasing button Power , two times press the button Resume and release both buttons.

5. After indicator of the cut-in/readiness поморгает and fires constantly, fall into service mode.

6. Four times press the button Resume , under each striking Resume indicators are switched: green-orange.

7. Once press the button Power for acknowledgement of the selected action (the unset of the counter ща pampers). For switching off the printer button Power press once again.

Jul 21, 2009 | Canon Office Equipment & Supplies

1 Answer

I have a canon mp830 that is has trouble code 5c00 on the lcd. the power light and trouble light flash alternately green and yellow respectively. I've cleaned the print head. How can I reset the printer to...


Canon MP170, MP450, MP530, MP600, MP610, MP800, MP810, MP820, MP830, MP960, MP970
MX700, MX7600, MX850

1. Switch off the printer the button Power

2. Holding button Resume (the red triangle in ring), include the printer (press the button Power ) - an indicator fires green cvetom.

3. Holding button Power , release the button Resume

4. Not releasing button Power , two times press the button Resume and release both button.

5. After indicator of the cut-in/readiness flashing.. and fires constantly, fall into service mode.

6. Four times press the button Resume , under each striking Resume indicators are switched: green-yellow.

7. Once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера). For switching off the printer button Power press once again.

Good luck!

Jul 09, 2009 | Canon Office Equipment & Supplies

2 Answers

No brake lights or horn both on samefuse but fuses ok


There may be a wire off the horn but this is no problem as they are only push on clips so if you locate the horn and check there are no wires off, if there is this should be your problem i would also advize just changing the fuse anyway making sure it is the right amp.

Jul 25, 2008 | Suzuki Vitara Cars & Trucks

1 Answer

Flashing lights


1. Switch off the printer (the button Power

2. Holding button Resume , include the printer (press the button Power

3. Holding button Power , release the button Resume (the indicator of the feeding/readiness must glow green)

4. Not releasing button Power , two times press the button Resume and release both buttons
- under each striking the button Resume indicator of the feeding/readiness changes the colour (one striking yellow, the second striking green). Beside printer, having more one indicator indication is switched (the indicator of the feeding/readiness green, indicator mistake yellow)
- after buttons will be отпущены, indicator of the feeding/readiness certain time will twinkle green (time моргания depends on models of the printer), then green fires constantly
- if after these action instead of constantly burning green printer continues to show the mistake, that or you mistakenned in points 1 4 (switch off the printer and repeat with point 1), or beside printer additional mistake, which necessary to avoid, otherwise he will not fall into service mode (that means this mistake possible hear here

5. Four times press the button Resume (under each striking the button Resume indicator of the feeding/readiness changes the colour, but beside printer, having more one indicator indication is switched: readiness/ mistake

6. Once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера). For switching off the printer button Power press else raz.
For some printer (for instance, iP2000) for switching off it is necessary to press Power once again i.e. three times podryad.

Some printers have two counters абсорбера Main and Platen (Bordless), and if after unset Main waste ink counter ( as is described in this instructions ) after leaving from service mode printer continues to show indication an overflow абсорбера repeat all points to instructions before point 5 inclusive, then instead of point 6 :
# For printer iP2000 and iP6220d
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press else raz.
# For printer iP3300, 6210d, pro9000, pro9500
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then once press the button Resume (the choice counter Platen waste ink counter) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press else raz.
or
- once press the button Power for acknowledgement of the selected action (the unset of the counter абсорбера), then two times press the button Resume (the unset simultaneously two counters) and press the button Power for acknowledgement of the selected action; for switching off the printer button Power press once again. (For printer pro9000 and pro9500 in documentation is specified only this variant sb

Apr 02, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
KLH R5100 Receiver Logo

Related Topics:

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top KLH Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5017 Answers

The Knight
The Knight

Level 3 Expert

73680 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a KLH Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...