Question about GE 25932 Cordless Phone

1 Answer

Handset cannot get charge from base

Cordless 5.8gz edge speaker #25932ee2

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers
Re: handset cannot get charge from base

If you have the base unit plugged into an outlet that is drawing a lot of current, then the battery won't be able to get enough current to charge the battery. Plug it into an outlet that doesn't have a lot heavy current use. Televisions, refrigerators, microwave ovens, etc do draw a rather heavy current when in use. Things like a radio, lights, etc don't draw that much. Also make sure that you place the phone on the charger so that the contacts touch. Then the red "charge" light should come on and you will be in business.

Posted on Dec 29, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a 2 handset GE cordless 25932EE2. Both handsets work great individually, BUT when we answer an incoming call with one phone, we can't use both handsets at the same time (for the same call). In...

The problem may be due to both your handsets operating on the same channel. To fix, try pressing and releasing the "chan/delete" button on one of the headsets. This will move it to the next available channel.

Mar 08, 2011 | GE 25932 Cordless Phone

1 Answer

Setting up my outgoing message: just purchased Uniden cordless DECT 1580. Manual says select command 8. How do I find Command 8? thanks, joan


please follow the instruction to register the handset to base

To register a DCX150 accessory handset:
1. Charge the handset completely.
2.Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.
3.When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.

If the display shows Registration failed, repeat the process again.

To register a DCX200 or DCX300 accessory handset:

1.Charge the handset completely.
2.Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding find until the charge LED starts to blink.
3.On the handset, press and hold # until the handset beeps and displays Handset Registering.
4.When the handset has registered to the base, the LCD will display Registration complete then show the handset
ID number.

If the display shows Registration failed, repeat the process again.


Jul 21, 2010 | Uniden Cordless Phone

1 Answer

Handset is fully charged and states No Link to base. Move closer to base, try again. This does not work as it has been tried.

before using the phone,the handset has to be registered with the base...from the menu select handset registration..then press the speaker button for some time which will register the handset...if u have a manual for this phone,please try from that book about handset registration..

Oct 22, 2009 | Panasonic KX-TGA101S Cordless Handset

1 Answer

Uniden XS 1210 cordless phone won't connect to base unit

try connecting both phones via the base that is working and see if they recognize each other. Let me know if that works.

Jul 21, 2009 | Uniden Cordless Phone

1 Answer

Hand set out of range disply is on. How do I reset.

here are some tips from my manual for out of range problems
hope they help
• Only one handset can be used to make or answer a call anytime.
If another handset attempt to do so, the screen will display OTHER
HANDSET ON and then OR OUT OF RANGE. You might press PHONE
or SPEAKER again until no other handset is using the line. Use the call
transfer feature to transfer a call to another system handset
or use the speakerphone feature so multiple members of your
house can be on an active call at the same time.
• Move the cordless handset closer to the base. You might have moved
out of range.
• Ensure that the base is powered up.
• Place the cordless handset in base cradle for 1 minute to allow the
cordless handset and base to resynchronize channels.
• If the cordless handset is in its base and the charging light does not
come on, refer to the charge light is off in troubleshooting guide.
• Reset the base. Unplug the unit’s electrical power. Wait for 15 seconds
then plug it back in. Allow up to one minute for the cordless handset
and base to reset.
• Other electronic products can cause interference with your cordless
phone. Try installing your phone as far away from these types of elec
tronic devices as possible: wireless routers, radios, radio towers, page
towers, cell phones, intercoms, room monitors, televisions, personal
computers, kitchen appliances and cordless phones.

Jul 16, 2009 | GE 29897GE1 Corded Phone

1 Answer

Audioline cordless phone

answering machine not working on the base station

Jan 13, 2008 | Philips CD6452B/37 Twin Cordless Phone

1 Answer

Uniden DSS7955 Cordless phone problems

I had the same problem!

What you need to do is hold the "end" and "#" key for 5 sec, which will deregister the headset then all you would have to do is place it back in the base for it to registered again.

Nov 25, 2007 | Uniden Phones

2 Answers

Motorola 580 handset not working

My handset does not connect to the base station. It flashes momentarily, but does not find the base. The base station has a humming noise when the phone line is disconnected and the talk button is depressed. Hum is also present when the phone line is reconnected. The problem was resolved by replacing the 9VDC power supply. The hum disappeared and the handset immediately connected to the base.

Oct 31, 2007 | Motorola Mobility MA580 (612572111116)...

1 Answer


Registering Handsets to the Base
Whichever handset you choose to charge in the base is automatically
registered to the base. Any additional handsets must also be registered to
the base before you can use them.
Be sure both handsets are fully charged.
One at a time, place each handset in the base. The charge/in use LED on
the base begins to flash, indicating the base is registering the handset.
Wait for at least five seconds, then pick up the handset and press
[talk/flash]. If the display shows TALK, the handset is registered. If not,
place the handset in the base to try again.
Press [end] and continue with the next handset.
Once both handsets are registered, it doesn’t matter which
handset is placed in the base or the charger.
When you charge the handsets, Caller
ID summary screen and the name of
the handset appears.

This can be find from uniden website.

Oct 17, 2007 | Uniden TRU8885-3HS Digital Cordless Phone

1 Answer

Base won't charge handset

the base of your handset needs to be repair take it to a tech

Apr 04, 2007 | GE 26938GE1 Cordless Phone

Not finding what you are looking for?
GE 25932 Cordless Phone Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts


Level 3 Expert

93891 Answers

Cindy Wells

Level 3 Expert

4720 Answers


Level 3 Expert

56798 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides