Question about Whirlpool Duet GHW9150P Front Load Washer

2 Answers

Whirlpool washer door won't secure

Whirlpool model ghw9200lw wont secure. if i hold it the washer starts and runs the whole cycle the door just won't secure

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Whirlpool Master
  • 3,361 Answers

Replace the wax motor and door lock mechanism.

Posted on Jul 16, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

Do you mean that the door won't lock, or that it locks, but requires an extra push and hold to make things work. If the latter, find the finger in the door area that trips the interlock switch and extend it's length slightly with hot glue or epoxy a small piece of wood or some such.

Posted on Jul 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool duet ghw9200lw front load washer will not start cycle


Check the door interlock on the washing machine. If it's faulty, the machine won't start its cycle. This page will give you an idea of what interlocks look like.
Door Interlocks

Feb 20, 2014 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer model GHW9200LW, THE CODE HF comes up ,tried the recommended fixes from the troubleshooting guide, but no luck


HF = High Fill
This can be caused by using non HE detergent in your front load. Put the washer in a cold rinse for a couple of cycles to clean the excess soap and try the cycle again using HE detergent. If the problem returns you may have a pressure switch or hose that will have to be replaced.

Aug 29, 2010 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Washer wont work at the spin cycle phase


you nead to replace tjhe door switch.the part#for the door switch is 8318084.

Nov 14, 2009 | Whirlpool LSR5132PQ Top Load Washer

1 Answer

Washer door wont latch ghw9200lw duet


Pulling the door open during the wash cycle meant that it was pulled open with the latch in the locked position. The door cannot be opened in this manner while it is operating. If the door now does not latch, it has probably been damaged and needs to be replaced. The following link explains how to replace the door latch:

http://www.fixya.com/support/r587965-door_latch_replacement_fdl_error

A replacement latch can be purchased on line at appliancepartpros.com. Just type in your model number and look under Section 5, for item number 7. The door latch is listed as part number AP3837611.

If you have questions, please let me know. I hope this helps you.

May 19, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Knocks when In spin cycle


no on most of these front loaders you have to replace the whole works and it is not fun!

Apr 27, 2009 | Whirlpool GHW9200L Front Load Washer

1 Answer

Washer won't start cycle after door is closed


Try taking the top of the machine off and checking all of the electrical connections, including the one to the door lock. I have to do this about once a month with my machine and it seems to work.

Jan 20, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

The washer mode light keeps blinking


the machine is locked out on the control, go to the signal button on the far right side and hold the button in for four seconds and it will unlock the control and yu can select the cycle that you want

Apr 16, 2008 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2180 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...