Will not print with one toner out of ink?

Check the ink level
Start with checking the ink level in your toner. ... Since you have a problem with printing in Yellow color check Yellow or Magenta ink level. If its ink level doesn't appear, it could be an issue with either Yellow or Magenta cartridges. Two fix the issue, you can try to perform Clean Printhead.
https://windowsreport.com/printer-wont-print-yellow/

Ink News - How To Correct Faded Prints From Toner ...

www.inkpal.com/ink.../tips-to-correct-faded-prints-from-toner-cartridges...

Rating: 3 - ‎12 votes
Mar 30, 2012 - You should particularly suspect this if the prints are faded on only one side and if the printer is not telling you to replace the toner cartridge.Missing: yellow

HP Officejet 6500 Printers - Fixing Print Quality Problems ...

support.hp.com/us-en/document/c01641184

The clear section of the waste toner box where that goes inside the machine check that area sensor located there might have toner on it so the printer thinks the waste toner box is full

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Did you change the toner?Developer unit? When did it occured?

FIRST: the copier must be cleaned and vacumed, it may be that toner falls onto transfer section and that causes the problem, you may also have problem with yellow developing unit or drum or transfer cleaning blade.

Pls. rate

Pls put empty Colour toner

I have to ask this question of you, just to make sure this is not an issue. Are you using a factory new ink or toner cartridge?
Please consider the following:
If you are using a refilled or third party cartridges that may well be your problem. Most manufacturers build logic into their products to prevent the use of “Other Equipment Manufactured” cartridges as well as re-filled cartridges.
They do this to prevent problems from contaminated inks or toner causing problems with print quality or damaging the physical printhead or photo conductors.
If you are using factory new ink or toner cartridges, then please call the manufacturer’s Technical Support for assistance with the warranty on the cartridges
Don

the solid light means toner is low. Blinking usually means either the cartridge is out of toner or the cartridge is having a technical problem. If you pull the yellow toner cartridge and put it back in with no change in result, you will need to replace the yellow toner cartidge

Take a tissue and clean the area where the toner is. Do not use anything wet at all. Just a soft tissue. Re-install toner and try again to print. If the problem continues, it may be a leaking toner catridge. The cartridge has a cleaning blade built in and it may be deffective. Try a new toner cartridge if so.

it may be many things, here some thing to try:

the ink or toner is contrammed with foreign liqued like oils, water, bad ink, bad toner cartridge,
oil, water, ink toner inside the ink itself
oil from a human skin my have came in contact with refill of ink or toner cartridge, cleaning solvent to clean the cartridge, needles for hte ink or toner cartridge, water in the ink or toner cartridge, steam or vapors of some kind, compress air can or air compressor will spread water solution, the freon is used in compressed air can thats way they get so cold when you spray the can.

paper may also be wet some how try new and different brand of paper.

rod the candymangandy

Step1
If you're setting up the printer or changing the toner or ink cartridge for the first time, double-check the instructions to make sure that you installed the cartridge correctly and, for new printers, that you have removed all the pieces of cardboard or plastic packing material. 
Step
2
Check to see whether paper is feeding from the paper tray. If it's not leaving the tray at all, try feeding a page manually (if that's an option) or using a different paper tray. Sometimes a problem with the tray can be traced to a broken spring or a piece of plastic. 
Step
3
If paper is feeding from the tray but jamming in the printer, examine where the jam is occurring and then inspect the printer carefully to see if you can find what is causing the problem. A piece of paper, for instance, might be blocking the paper path. 
Step
4
If paper is feeding through the printer but coming out blank, check to see whether the printer is out of toner or ink. A defective toner or ink cartridge could be the problem.