Question about Office Equipment & Supplies

2 Answers

Blurred color images

On 2 sided color copies made on 80# cover stock 11 x 17 the colors sometimes are not alligned properly on top of each other (making a blurred image) one side comes out clear and the other side is blurry because the 4 colors are not lined up on top of each other

Posted by on

  • jetpresscb Jul 17, 2009

    canon 4080 imagerunner

  • george saucedo
    george saucedo May 11, 2010

    what model of copier????

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 143 Answers

I'm not sure of what brand and/or model you have, but most have a maintenance mode to do color alignment.

Posted on Aug 01, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My camera is producinjg blurred picture plis help me out
i dont want to loose it

Posted on Sep 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i settle the problem of magenta developer finishing so fast. Magenter developer for Konica Minolta Bizhub C550 is getting finished so fast.


If the message Change Imaging Unit Magenta displayed refer to imaging unit with contents a developer.The Imaging unit life is 80.000 copies.
The imaging units located after front door when is located the waste toner box.
If the message M toner end/change the M toner displayed refer to toner cartridge
The toner cartridge life 15.000 copies 5% saturation.In full color mode the color saturation is 80% and the color toner life is 6.000-8.000 copies.
I think your problems is a toner not the developer.

Apr 11, 2013 | Konica Minolta Bizhub C550

1 Answer

How we make photocopy in a x1190


Hi,

You can photocopy on this printer by following these steps:

Note: You can make a quick color or black and white copy.

Press Color Copy or Black Copy on the control panel.

To make black and white, gray, or color copies:
1 Open the top cover of the All-In-One.

2 Place the item you want to copy face down on the glass. Make sure

the upper left corner of the front of the item aligns with the arrow.

mongkey_35.jpg

3 Close the top cover.

4 Open the Lexmark All-In-One Center (see page 3).

The All-In-One Main Page displays.

5 Click See More Copy Settings to review and change the copy

settings.

mongkey_36.jpg


6 Select your copy settings.

Note: You may want to reduce or enlarge the image.

7 Click Copy Now.



I hope this works for you. Kindly reply for further assistance. Good Luck!

Thanks for using Fixya!
Mongkey
TIPS: Is your computer slow? This might help
http://www.fixya.com/support/r8158906-diy_manual_pc_tune_up
(for Windows only)

Feb 22, 2011 | Lexmark X1190 All-In-One InkJet Printer

1 Answer

Image is harp in center and lburred on both sides.


Readjust ur tube back to the original position.Ur convergence is dead,Must know to solders?Replaced the 2 convergence ICS and all it resistors.Tv Repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost u $300 for parts and labors.

Feb 06, 2010 | Televison & Video

3 Answers

Describe your Ricoh Aficio 1232C Error Code SC481 Problem


Defective main motor
• Image transfer belt out of position
• Belt mark blurred or absent

Right from the service manual
My best guess is belt mark blurred or missing
or image belt out of position

Feb 01, 2010 | Ricoh Aficio 2027 All-In-One Laser Printer

1 Answer

Lexmark C920 color print is faded on bottom of page


Quite possible something happened to the printheads.....especially the Magenta one. Might have been 'bumped' out of alignment. They might just need to be wiped clean with a toner cloth. They are usually right above the toner cartridges. Have you tried a color alignment adjustment in Config mode?

Mar 12, 2017 | Lexmark C920 Led Printer

1 Answer

Picture on Samsung LCD LNT5271F is blurred sometimes, lines, color distortion, double images, then goes away and will come back.


Try reseating the LVDS cable.It runs from the main signal board to the T-con board at the top of the panel.

Dec 01, 2009 | Samsung LN-T5271F 52 in. LCD Television

1 Answer

How to get glowing effect in coreldraw


To create a glow: make a copy of your image you want to glow. paste to the side or original. select original. Convert to Bitmap, then use Gaussian blur, select pixel width of blur, preview it, then apply it when it look good. Put your copied image on top of the blurred image, bringing the copied image TO FRONT. voila NOTE change color of image to be bit-mapped BEFORE you convert to bitmap for a COLORED Glow

Dec 19, 2008 | Computers & Internet

1 Answer

Hp color laserjet 1600 copies have a blurred image


This sounds like a registration problem.

Use the menu (on the printer) to print antest page AND a configuration/information page.

Look (critically) at the alignment of the seperate coloure Yellow Magenta Cyan. You will probably find that these are out of aligmnent across the page.

The cause of this, is that the printer can't perform a calibration properly (printer probably takes a long time when calibrating too) and is usually down to failure of one of the sensors on the transfer belt.

Sometimes you can clean these and solve the problem, but often is a failure of the component itself. Thes are NOT available as a spare part, and the repair to correct this would need a replacement transfer belt.

Transfer belt replacement in this printer is quite an involved task, though it is within the capabilities of someone with reasonable mechanical aptitude.

Nov 24, 2008 | HP LaserJet 1600 Printer

3 Answers

Slight RGB alignment problem


Please describe the allignment problem

Apr 19, 2008 | Philips ProScreen 4650 Multimedia...

4 Answers

Blurred purple image


The doe problem go away if you bang on the side of the camera? there is a known issue with the CCD sensor on certin model cameras that after a few years the glue or somthing dries up inside the sensor and it developes a bad connection. Canon has admit they know about this problem and they will fix them free of charge and pay shipping both ways. Sometimes users can bang on the side of the camera and the camera will work properly again but not for very long. I cant see your display so im not sure if thats it or not but the problem has this purple blackish symptom. Go to the canon usa webpage and then search around for your camera model and if there is a known issue it will say on their site. Then there are ways to contact them on their site.

Nov 14, 2005 | Canon PowerShot S1 IS Digital Camera

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

75066 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...